Archive for the ‘Linear Motors’ Category

Motion Control – Moticont Voice Coil Motor with Internal Shaft and Bearing Features 3.75 Inch Stroke Length!

  Van Nuys, CA – Motion Control Components – The GVCM-051-127-01 Linear Voice Coil Motor is Moticont’s newest linear DC Motor with Internal Shaft and Bearing. The 3.75 in. (95.3 mm) stroke of the precision ground 0.236 (6.0 mm) diameter shaft with an internal thread, is guided by a long-life plain bearing that can allow […]

1.50″ Diameter Linear Voice Coil Motor with a 0.75″ Stroke Is Vacuum Compatible!

Motion Control Vacuum Compatible Voice Coil Motor Van Nuys, CA – Motion Control Components – Moticont has added a vacuum compatible voice coil motor to its line of linear DC motors. This vacuum compatible, clean, brushless, quiet, efficient, low inertia, high acceleration, high speed linear DC voice coil motor has zero cogging and features high […]

Motion Control – Redundant Coil Voice Coil Motor Available from H2W Technologies, Inc!

Motion Control Redundant Voice Coil Motor from H2W Technologies!   Santa Clarita, CA —– When three-phase AC power is applied to the primary, a travelling electromagnetic flux wave is induced and moves relative to the primary. The wave induces an electric current in the conductive reaction plate. The induced electric current interacts with the magnetic […]

Motion Control – Low Profile XY Voice Coil Positioning Stage

  Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system. The voice coil stage (VCS06-010-BS-01-MXY) is a closed loop positioning system that can be used for positioning applications. […]

Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!

Motion Control Linear Actuator   Van Nuys, CA – Motion Control Components – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, […]

Smaller in Diameter than a US Quarter, This Miniature Voice Coil Motor Has a High Force-to-Size Ratio!

  Van Nuys, CA – Motion Control Components – Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio! It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak force in a compact 0.750 in. (19.1 mm) […]

Motion Control – 35mm diameter CBL35C Programmable Electric Moving Coil Servo Actuator Available from Electromate!

    With outer diameters of only 43mm to 90 mm, these frameless brushless servo motors are extremely compact.    Vaughan, Ontario, Canada — Motion Control Components — Introducing the 35mm diameter CBL35C electric cylinder with built-in controller from SMAC Corporation. With its built-in controller, the CBL35C controls force, position and velocity and features simple […]

Motion Control – Hollow Shaft Non-Commutated Actuator.

  Santa Clarita, CA —– Motion Control – H2W introduces its most compact moving magnet actuator with a hole through the shaft. The voice coil actuator (NCM01-04-001-2IBH) can be operated under either open or closed loop position control and is ideal for controlled sinusoidal motion applications (1 to 1000 Hz for open loop applications and 1 to 125 […]

Motion Control – Match One of These Compact 1.0 Inch Diameter Voice Coil Motors to Your Application’s Stroke Requirements!

  Van Nuys, CA – Motion Control Components – Moticont has added to it’s line of Linear Voice Coil Motors, LVCM, two 1.000 in. (25.4 mm) diameter motors. The LVCM-025-022-01 has a stroke length of 0.375 in. (9.5 mm) a mid-stroke length of 1.30 in. (33 mm) and it has a high force to size […]

Motion Control – Compact High Force Iron Core Brushless Linear Motor!

  Santa Clarita, CA —- Motion Control – H2W engineers have developed a compact high force brushless linear motor (BLSM-1F) that can generate 300 lbs [1330 N] at a 10% duty cycle and 100 lbs [444 N] at a 100% duty cycle, and, when used with a matching magnet track (BLST-FSX). The mass of the […]

Powered by WordPress | Designed by: Best Free WordPress Themes | Thanks to dcreators, Premium Themes and