Archive for the ‘Stage’ Category

Motion Control Stages – Precision Crossed Roller, Brushless Linear Motor Stages!

  Santa Clarita, CA —– Motion Control Components – XY Cross Roller Positioning Stages – The XRS-19-09-XY-001 is a XY crossed roller positioning stage uses a brushless linear motor to generate a continuous/peak force of 52.4 lbs [233.1 N] (bottom axis), 52.4 lbs [233.1 N] (top axis) with a total stroke length of 19.0 in […]

Motion Control – Large Open Center XY Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – The demand for a high accuracy, robust, open-frame stages is met with IntelLIDrives dual-axis, large aperture stages that address the unique needs of scanning microscopy, wafer and printed circuit board inspection, automated assembly and wide range of specimens and samples scanning in many types […]

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

  Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available […]

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

  Sunnyvale, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a […]

Motion Control Automation – 1.0 Micron Voice Coil Positioning Stage from H2W!

    Santa Clarita, CA —–  Motion Control Automation- The VCS05-060-AB-01-MC voice coil positioning stage uses H2W voice coil motor NCC05-18-060-2X to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.1mm]. The 1.0-micron resolution encoder allows for precise positioning. It comes supplied with […]

Motion Control Application – Universal XYZ Robot for Microscopy and Pipetting from Intellidrives!

      Philadelphia, PA, – Motion Control Components and Systems – Manual pipetting is a time-consuming process that can lead to repetitive stress injuries. Automatic pipetting involves the use of robots to perform this type of tedious bench work, allowing scientists more time to design experiments and analyze data. Overview “Pipetting” refers to the […]

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Sunnyvale, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction […]

Motion Control – Linear-XYZ-Rotary Combination Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – Intellidrives’ compact, high precision XYZ-Rotary stage is a combination of Intellidrives: LSMA XY lead-screw driven stages, an MLVT Lift stage, and an RTHM worm gear rotary table. Features include: – XY stroke 100×100 mm – Lift 13 mm – Unlimited rotation XY Lead-Screw Driven […]

Motion Control – High Precision Vertical Elevator Stage from OES!

  Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator […]

Motion Control – Four Axis Vacuum Compatible Gantry from H2W Technologies.

Santa Clarita, CA —– Motion Control — Fully vacuum compatible four axis positioning gantry (XYTZ). The XY axes are driven by brushless linear motor DR Positioning Stages. The Theta axis is a worm gear stage that is driven by a rotary stepper motor under closed loop control in conjunction with an arc-segmented linear encoder. The […]

Powered by WordPress | Designed by: Best Free WordPress Themes | Thanks to dcreators, Premium Themes and