Category Archives: Autocollimator – Digital

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – the LFA-3403 Is an Open Aperture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Automation Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Measure Very Small Angular Displacements Of Very Small Parts With Low Cost Digital Autocollimator

miniature autocollimater

Sunnyvale, CA,   —  The AC201 2 axis high performance angular displacement Digital Autocollimator System from Equipment Solutions, Inc. is a very compact high precision instrument designed to measure very small angular displacements with high sensitivity over distances to 2.0 in. (5.06 cm). The AC201 Digital Autocollimator is therefore ideal for instrumentation, tooling, and OEM manufacturers with requirements for high precision alignment, flatness, squareness of surfaces in relation to each other, detection of angular movement, shaft straightness, motion control, and other orientation measurements. This rugged and compact 1.0 in. x 1.1 in. x 1.3 in. (2.5 cm x 2.8 cm x 3.3 cm), low cost digital autocollimator can interface with a PC.

The AC201 Digital Autocollimator has an optical angular range of ±344 arc sec (±100 mrad), and a sensitivity of 0.2 arc sec (1.0 µrad).  The laser has a beam diameter of < 0.125 in. (<3 mm) and requiring only a slightly larger reflection surface.  Electrical requirements are: +5.0 VDC @ 30 mA.  The AC201 Digital Autocollimator can be factory configured with one of several different interfaces including Analog, USB, SPI, or quadrature encoder.  The black anodized (per MIL-A-8625C) 6061-T6 Aluminum body has 2x 4-40 mounting holes and integral electronics and connections are via a Nano D9 or USB connector.

Supplied with a Windows® application software and more than 24 ASCII commands for control and operation, the AC201 Digital Autocollimators are able to perform complex data collection and analysis. They are ideal for: Vibration analysis, mechanical and optical alignments, servo control feedback, tip & tilt measurements, settling time and stage damping analysis, and measurements needed in the manufacturing and testing of miniature mirrors and lenses, linear and rotary stages, fiber optic components, robotic components, and medical analytical devices.

Click Here for

  • Specifications
  • Angular Range
  • Interface Drawings
  • Downloads

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions, 1098 W. Evelyn Ave. Suite #102; Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog
Powered by WordPress and ThemeMag