Category Archives: Controller – Brushed

Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages

motion control - product video
motion control - stages - custom


Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.

Watch on YouTubehttps://youtu.be/2ymH0TjI3Vc

Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!

Motion Control –  Three-Axis Stage!

motion control - three-axis stage


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems. These new, larger, high stability, gimbal mounts are 400 mm wide x 480 mm high, weigh 50 kg and handle loads up to 10 kg and the Roll Axis features a large 90 mm thru hole for cables and optics.

Innovative Automation – High Precision Three-axis Stages Adds A New Dimension to Pitch and Roll Stages … … Lift!

Innovative Automation -ZGG Stage – Lift Plus Dual Goniometers

motion control three-axis stages
motion control - stage

 

 

 

Van Nuys, CA – Innovative Automation – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.

See the ZGG Stage in Action Click on the Youtube Link –  https://youtu.be/I7YQ3LycIwA

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Innovative Automation – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!

Innovative Automation – Multi-axis Motion Controllers

innovative automation - multi-axis controller
motion control - stage

 

 

 

Van Nuys, CA – Innovative Automation – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.

Innovative Automation- High Precision, Low Profile, Compact 40 mm Motorized Rotary Stages!

Innovative Automation – 40 mm Diameter Rotary Stage!

Innovative Automation - 40 mm dia rotary stage
motion control - stage

 

 

 

Van Nuys, CA – Innovative Automation – The AY110-40-01 Rotary Stage (pictured) from Optimal Engineering Systems, Inc. (OES) offers the users a high precision, low profile, compact motorized rotary stage. This precision stage with a diameter of 40 mm (1.575 in.) table is just 30 mm (1.181 in.) high and the footprint is only 133 mm by 57.5 mm (5.236 in. by 2.264 in.). The stage has an 8 mm (0.314 in.) aperture, a vernier scale, and a pattern of threaded mounting holes in the rotary table, and holes in the base for easy integration into new and existing applications.

Motion Control – High-quality DC Motors Equipped with Powerful Permanent Magnets

Motion Control – Brushed DC Motors

Fall River, MA — Motion Control – maxon DC motors are high-quality DC motors equipped with powerful permanent magnets. The centerpiece of the motor is the globally patented ironless rotor. It offers cutting-edge technology for compact, powerful drives with low inertia. As a result of their low mass moment of inertia, the DC motors feature very high acceleration. The modular and configurable DCX and DC-max programs can be adapted flexibly to the needs of the customer.

motion control - maxon

 

DCX Program
motion control - brushed motor
High power density, high efficiency, smooth running

and available for online configuration. Configure sizes

from Ø 6 – 35 mm. Choose between precious metal

or graphite brushes, ball or sintered bearings,

and much more.

 

 

For product details & specifications: CLICK HERE

Motion Control – Maxon’s Innovative Product Developments

Motion Control –  New, Innovative Products

Maxon introduces standout products for 2023-2024!

motion control - 6 mm diameter motor

Fall River, MA — Motion Control – This year’s Hannover Messe (April 17–21, 2023) featured maxon’s latest product developments, along with new 2023/2024 product catalog with more than 600 pages of drive technology. Standout products include the brand new ECX PRIME 6, and the EC frameless DT motors series’ new sizes 65 and 85.

motion control - maxon

maxon’s exhibit this year was entirely based around the theme of “more torque and more dynamics in the smallest of spaces.” At its ultra-modern booth, the leading supplier of electric drives and systems gave a first-hand presentation of exciting solutions. The spotlight was on the new ECX PRIME 6: the first size from the new ECX PRIME motor family.

Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!

Motion Control – Yaw and Pitch Stages

motion control - yaw/pitch stages
motion control - stage

 

Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis). The yaw range of travel is +/-10 or +/- 15 degrees. The pitch range of travel is 360 degrees of continuous motion. The diameter of the pitch axis is 60 mm.

Applications include Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

Motion Control – High Precision, High Load Goniometer Stages with +/- 30 Degrees of Travel Are Available from OES!

XYZ-G Positioning Stage – XYZ-Goniometer Positioning Stages

Motion Control goniometer stage
motion control - stage

 

Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees of travel with 30 kg of load.

Motion Control – Maxon’s ESCON Module 24/2 Servo Motor Controller!

Motion Control – Miniature Servo Motor Controller

motion control - miniature servo motor controller

motion control - maxon

 

 

Taunton, MA -Motion Control – Maxon Motor expands its offering of miniaturized controllers with its latest OEM plug-in module. This high performance 4-quadrant PWM servo motor controller is designed to command permanent-magnet-activated brushed and brushless DC motors with Hall sensors up to 48 Watt continuous output and 144 Watt peak output.

Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!

Motion Control – Long Travel Linear Stages

motion control - linear stagemotion control - OES

 

 

 

Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. These high precision stages can be ordered with a Two-Phase Stepper Motor (pictured) which feature resolutions of 2 micron and 1.25 micron (achieved with a 10 or 20 micro-steps per step stepper motor driver), and up to 80 mm per sec of travel.

Multi-axis Controllers – Galil Achieves Prestigious UL/CSA Certification for its Range of Controller Series

Multi-axis Controllers – Galil Achieves Prestigious Certification!

motion control Electromate -Galil
motion control electromate robotics

 

 

 

Vaughan, Ontario, Canada — Multi-axis Controllers – Galil Motion Control, a renowned industry leader in the motion control market, is proud to announce the successful attainment of UL/CSA certification for several of its premier controller series. This milestone exemplifies Galil’s undying commitment to advancing safety, reliability, and quality in the products it delivers to customers globally.

The prestigious certifications attained are UL 61800-5-1/CAN CSA C22.2 No. 274, which governs adjustable speed electrical power drive systems, and UL 61010-1/CAN CSA 22.2 No. 61010-1, which stipulates safety requirements for electrical equipment utilized for measurement, control, and laboratory use.

Motion Control – Giant Solar-Powered Butterfly Puts the Focus on Climate Change Solutions

Motion Control – Maxon to Host the Solar Butterfly

Motion Control – Seeking climate change solutions, the world’s largest sustainability tour is coming to Taunton, Massachusetts. The solar-powered butterfly is a 30-foot-long tiny house in the shape of a butterfly, which charges the electric vehicle it tows

.

motion control - combating climate change

motion control - maxon motors

 

 

Motion Control – The SolarButterfly is focused on reaching millions of people, alerting them to the companies and individuals that are integral in transitioning societies away from fossil fuels toward clean energy technologies. Presently on a four-year journey around the world, the SolarButterfly plans to identify, record, and publicize at least a thousand climate protection pioneers and their solutions.

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Motion Control – 600 MM Vertical Lift Stages

motion control - vertical lift stage
motion control - stage

 

 

 

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm.  The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder.  Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability.  The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification.

Motion Control – New Miniature Gearhead from Harmonic Drive LLC: The CSF-2XH

Motion Control – Miniature Harmonic Drive Gearhead!

THIS ZERO BACKLASH MINI GEARHEAD IS IDEAL FOR SERVO & STEPPER MOTOR APPLICATIONS

motion control - miniature harmonic drive gearhead
motion control electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control – Electromate – Harmonic Drive LLC, a leading provider of precision motion control solutions, is proud to announce the release of its CSF-2XH mini gearhead designed for servo and stepper motors.

Available with an output shaft or flange, the CSF-2XH miniature gearheads are offered in 4 sizes with gear ratios 30:1 to 100:1 and peak torque: .5~28Nm. These mini strain wave gears are ideal for semiconductor and robotics applications.

Motion Control – Electromate Unveils Quantum Devices’ Cutting-Edge QM22 Series Miniature Encoder

Motion Control – Miniature Encoder!

motion control - miniature encoder
motion control electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control – Electromate, a leading Canadian distributor of state-of-the-art industrial automation products, is proud to announce the addition of Quantum Devices’ latest innovation, the QM22 series of optical incremental encoders, to its comprehensive portfolio.

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

Motion Control – Four Axes Positioning Stages

motion control - four axes stages
motion control - stage

 

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages.  The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation.  These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

OES – All New! High Precision, Three-axis Gimbal Mounts with Four Motor Options Offer Greater Flexibility and Stability!

OES – NEW! Three-axis Gimbal Mounts!
OES- gimbal mount

OES - motion control - OES Components

 

 

 

Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below the center line of rotation allowing for the positioning of: Cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications on their respective centerlines.

Motion Control – New High-Performance Hollow Shaft Gear Unit from Harmonic Drive: The HPF Series

Motion Control – Hollow Shaft Harmonic Drive!

Motion Control – High Torque Outputs and Flexible Installation Options for Heavy-duty Industrial Applications
motion control - harmonic drive
motion control electromate robotics
Vaughan, Ontario, Canada — Motion Control -Harmonic Drive, a leading provider of precision motion control solutions, is proud to announce the release of its HPF series of hollow shaft gear units. Designed for heavy-duty industrial applications, these advanced gear units offer high torque outputs and flexible installation options, making them ideal for use in demanding environments.

Powered by WordPress and ThemeMag