Category Archives: Controller – Brushless

Motion Control – Maxon’s ESCON Module 24/2 Servo Motor Controller!

Motion Control – Maxon Motors introduces a miniature controller with maximum functionality.

Maxon motion control Servo Motor Controller - Escon24/2

Maxon Logo

Fall River, MA -Motion Control – Maxon Motor expands its offering of miniaturized controllers with its latest OEM plug-in module. This high performance 4-quadrant PWM servo motor controller is designed to command permanent-magnet-activated brushed and brushless DC motors with Hall sensors up to 48 Watt continuous output and 144 Watt peak output. Its features include: high usability, exceptional performance and power density in servo motor controller technology. It is unprecedented in functionality, protection, and performance.

In addition, the entire maxon ESCON servo controller line now offers new functionality: an RC servo signal evaluation for speed or current set values, current limiter and offset, or the option to predefine analog speed ramps.

The innovative Motion Control OEM plug-in module features excellent controller characteristics. The drift-free yet extremely dynamic speed behavior enables speeds up to 150,000 rpm. It provides extensive functionality with free configurable digital and analog inputs/outputs and can be operated in various modes, such as speed controller (closed loop), speed controller (open loop), and current controller. A perfect match for maxon’s motor range, the miniaturized ESCON Module 24/2 suits even the highest-demanding applications and most dynamic drive solutions. Plus, it easily integrates into complex applications with little effort.

A detailed Motherboard Design Guide is available for integration to OEM PCBs and a suitable motherboard makes initial commissioning a simple task. This allows the OEM to focus on the development of their own device and simply rely on maxon’s expertise for the motor control part that is provided in the ESCON module.

The compact servo controller is controlled by an analog set value. It can be specified by means of analog voltage, by external potentiometer, by defined value, by means of PWM signal, or with RC servo signal with variable duty cycle. Other key features include the ability to enable or disable the power stage depending on the direction of rotation as well as acceleration and deceleration by employment of defined speed ramps. The speed can be controlled by means of digital incremental encoder (2 channel, with/without Line Driver), DC tacho, or Hall sensors.

Startup in no time

Top performance should not be a matter of trial and error. For that reason the servo controller has been designed to be user friendly and with easy startup functionality. No in-depth knowledge of drive technology is required for operating.

When connected to a PC via a USB port, it can easily and efficiently be parameterized with the graphical user interface «ESCON Studio». A variety of functions and user-friendly wizards as well as a well-designed automated fine-tuning controller procedure assist during commissioning, for configuration of inputs and outputs, and diagnostics.

Protection at its best

The ESCON Module 24/2 features protective circuitry against overcurrent, excess temperature, undervoltage and overvoltage, voltage transients and short-circuits in the motor cable. It also is equipped with protected digital inputs and outputs and adjustable current limitation to protect motor and load. Motor current and actual motor shaft speed can be monitored by means of analog output voltage.

Pure flexibility and top efficiency

The wide range of both input voltage and operating temperature of +60°C (140°F) and a surplus derating allow flexible use in almost all drive solutions, such as small electronic appliances and equipment engineering or robotics. With its exceptional efficiency of 92% and miniature dimensions, the ESCON Module 24/2 is a number one choice for mobile, highly efficient yet consumption-optimized applications.

For more information on the ESCON servo motor controller range, visit http://escon.maxonmotor.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

 

Maxon Logo
Order Our Catalog

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — motion control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

Motion Control – Maxon’s Driven Magazine

motion control driven magazine

 

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application.  An application that could be on Mars, under water, or even implanted in the human body!

motion control - maxon

 

 

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application.   

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - drone application


motion control - maxon motor

 

Taunton, MA — Motion Control – Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices!

motion control - Voice Coil Motor Controller

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!

motion control XZR Stage
motion control - stage

 

 

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

Motion Control – Frameless Servos for Robots

motion control- frameless motors for robots


Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

motion control - electromate robotics

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – Application – Finding The dark energy of the universe.

Motion Control – Application – Searching for “Dark Energy”!

Motion control – Application- The HETDEX project is the first major attempt to find “dark energy” in the universe. With special spectrographs, the three-dimensional positions of one million galaxies are recorded. In the summer of 2012, the Hobby-Eberly Telescope started scanning the universe – aided by maxon motors every step of the way.

motion control application- hetdex project

Hobby-Eberly Telescope: View of the mirror. The University of Texas at Austin/ A. Sebring. © 2012 HET


motion control - maxon motors

 

Taunton, MA — Motion Control – Application – The Hobby-Eberly Telescope (HET) is located at the McDonald Observatory in West Texas. Its spherical primary mirror consists of 91 identical hexagonal segments, each one meter in size. Together, these individual mirror segments form a mirror with a diameter of almost 11 m, which makes it the largest in the world. The effective aperture of the primary mirror currently amounts to 9.2 m at an opening angle of four arc minutes*.

Automation Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   Motion Control —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

Motion Control – High Precision Linear Stages


motion control - OES Components

 

 

Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.).

Motion Control Innovation – Maxon Flat Motors used in Solar Powered Drone

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.
motion control innovation - solar power ed drone

motion control - maxon

 

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Powered by WordPress and ThemeMag