motion control automation

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

June 12, 2023 Editor-Publisher

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages. The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation. These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

Motion Control – Maxon partners with MassRobotics to Support the Advancements of Drive Technology in Robotics

May 22, 2023 Editor-Publisher

Motion Control – Maxon Partners with MassRobotics

Maxon is teaming up with MassRobotics and other companies, organizations, and leading research centers to create new innovations across a wide range of applications.

Fall River, MA — Motion Control – MassRobotics and maxon announce a partnership to support the robotics innovation ecosystem through collaboration and exploration of motion control technologies around automation and manufacturing-related applications. With maxon’s extensive expertise and knowledge of electric drives, this partnership will support and advance the latest innovations and technologies in motion control with automation-focused companies in the robotics sector.

Based in the Boston area, MassRobotics is the first and largest independent nonprofit robotics startup escalator in the world whose mission is to grow and support robotics innovators and entrepreneurs.

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

May 18, 2023 Editor-Publisher

Motion Control – Open Aperture XY Alignment Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes. These new low profile 87 mm (3.425 in.) high XY stages, have a 188 mm x 188 mm (7.401 in. x 7.401 in.) open aperture. Easy integration of tooling and fixtures is facilitated through a precision series of threaded mounting holes.

Motion Control – High Force Linear Servo Motor is just 2.25 Inches Long at Mid-Stroke!

May 02, 2023 Editor-Publisher

Motion Control – High Force Linear Servo Motor!

Van Nuys, CA – Motion Control Components – A high force Linear DC Servo Motor from Moticont has been added to their expanding line of voice coil or moving coil motors. The LVCM-095-038-01 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed positioning loop. Clean non-commutated, zero cogging, zero backlash voice coil motors (also referred to as linear actuators) are, efficient, brushless high speed linear servo motors.

This LVCM-095-038-01 Linear Servo is 3.75 in. (95.3 mm) in diameter and has a continuous force of 23.1 lb. (102.7 N) and a peak force of 73.1 lb. (324.4 N) at a 10% duty cycle.

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

April 20, 2023 Editor-Publisher

Motion Control – XYZ-Goniometer Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages. Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z axis stages with 15 mm, 30 mm, 50 mm, 75 mm, or larger than 100 mm of linear travel linear in any combination of X, Y, and Z axes. These stages are the ideal choices for: Crystallography, metrology, light measurement, mirror positioning, laser scanning, drilling and machining, reverse engineering, inspection, assembly, measurements, tracking, and inspection and optical bench applications.

Motion Control – Application – Mini Pan/Tilt for HD Cameras

April 05, 2023 Editor-Publisher

Motion Control – Custom Gearmotors

With digital television fast approaching, camera manufacturers are flooding the market with new, lightweight units, but few companies are providing the professional equipment that goes with the upcoming change.

“We searched across all known small motor manufacturers, but only Maxon Precision Motor was able to provide a motor that met our requirements,”

Fall River, MA — Motion Control Application – Up until 2006, the only broadcast-use professional motorized Pan/Tilts in the market were very heavy. This is because the equipment was built to hold analog video cameras, which could weigh as much as 50 kg and up. With February 2009 approaching, the final day of transition for digital TV, the leading HD camera manufacturers, Sony and Panasonic, have flooded the US market with new lightweight HD digital cameras, such as HDR-FX1 and AGHVX200, respectively. These new, HD cameras weigh less than 4.5 kg, and that weight continues to drop as the use of flash memory storage devices continue to rise.

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

March 30, 2023 Editor-Publisher

Motion Control – Motion Controllers for Servos and Steppers!

Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one to four axes of motion for users without prior motion control experience. These MCC controllers integrate a motion control card and operator interface in one package. Having a user-friendly interface, they allow the user to operate the motion controller, without the need for a PC, PLC, host controller, or programming.

The modes of operations are: Set Acceleration, Set Velocity, Set Position, Absolute Move, Relative Move, Find Home, Reset Position Counter, Go to Position Zero, Joystick Operation and Stop All Motors. The MCC Controllers feature a 4-Line LCD, 32-button keypad, STEP and DIRECTION outputs for each axis.

Motion Control – High Precision 300 MM Motorized Vertical Lift Stage from OES Features: Stability, High Load Capability, and Low Cost!

March 09, 2023 Editor-Publisher

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control – A vertical lift of 300 mm (11.811 in.), high stability, and low cost are just some of the features of the AT20-300 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES). This high load, 50 kg (110.2 lbs), vertical lift stage can be easily integrated into almost any application. The large 400 mm x 200 mm (15.748 in. x 7.874 in.) stage has a pattern of threaded mounting holes. The rigid box construction of the moving component of the elevator stage travels on six slide rails assuring smooth vertical travel and parallelism of the table and mounting surface at all times, and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy.

Motion Control – Ultra-High Precision, Compact, Low Cost, Optical Positioning System Features Zero Translation from Equipment Solutions!

February 19, 2023 Editor-Publisher

Motion Control – Linear Focus Actuator

Sunnyvale, CA, — Motion Control – Optical Positioning System – Developed for precision optical positioning applications the LFA-1210 Linear Focus Actuator features a patented zero-translation tangential flexure for high speed travel. The clear aperture, 10 mm (0.394 in.) stroke length and standard 12 mm optics mount (or an optional DIN mount for use on microscopes) make this linear focus actuator ideal for: Optical focusing, scanning, interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, biotechnology, and semiconductor test equipment.

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

February 16, 2023 Editor-Publisher

Motion Control – 0.03 micron Resolution Elevator Stage!

motion control - elevator stage

Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables and 20 mm of vertical travel. High precision ball bearing profile rails assure very high parallelism and smooth motion throughout the raising and lowering of the table. These Z-Axis Stages are ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!

January 29, 2023 Editor-Publisher

Motion Control – Miniature Linear Focus Actuator

Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams

Motion Control – Latest Generation Single Axis Motion Controller from Galil

January 02, 2023 Editor-Publisher

Motion Control – New Single Axis Motion Controller!

This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

Available as a compact card-level or box-level unit
Connects to a stepper or servo motor amplifier of any power range
Can be purchased with an internal 800-Watt brushless sine drive or microstepping drive which minimizes space, cost, and wiring
Operates stand-alone or can be networked to a PC via Ethernet
Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.

Features include:

Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
Non-volatile memory for programs, variables, and arrays.
Concurrent execution of four programs.
Optically isolated forward and reverse limit inputs and homing inputs
8 uncommitted, isolated inputs and 4 isolated outputs
High speed position latch and output compare
2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

November 21, 2022 Editor-Publisher

Motion Control – Maxon’s Driven Magazine

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application. An application that could be on Mars, under water, or even implanted in the human body!

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

October 26, 2022 Editor-Publisher

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

The YP100-45 Series of Yaw-and-Pitch Stages were developed through the integration of a rotary stage (yaw axis) and a goniometer (pitch axis) having a travel range of +/- 45 degrees.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

October 11, 2022 Editor-Publisher

Motion Control – Frameless Servos for Robots

Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

August 20, 2022 Editor-Publisher

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control – Large Open Aperture XY Alignment Stages Feature: High Resolution and High Repeatability!

March 25, 2022 Editor-Publisher

Motion Control – Open Aperture XY Alignment Stage

Van Nuys, CA – — Motion Control – New high resolution and high repeatability Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). Supplied with a standard 4 mm-per-turn ground lead screw, the AU200-200×200 Alignment Stages feature 200 mm (7.874 in.) of travel in both the X and Y axes. These low profile 80 mm (3.179 in.) high XY stages have a 250 mm x 250 mm (9.842 in. x 9.842 in.) open aperture.

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

March 22, 2022 Editor-Publisher

Motion Control – Mecademic Robotics releases new firmware!

Vaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!

March 18, 2022 Editor-Publisher

Motion Control Application – Motors

They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.

Taunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.

Motion Control – New Rod-style electric actuator from Tolomatic designed to meet hygienic standards available from Electromate!

February 25, 2022 Editor-Publisher

Motion Control – Rod-style Electric Actuator!

Vaughan, Ontario, Canada — Motion Control Products — A new RSH electric hygienic rod-style actuator from Tolomatic delivers clean, continuous control to automation machinery. RSH actuators are designed to help improve repeatability, enhance quality, reduce contamination potential and increase flexibility of hygienic machine designs, particularly for the food, beverage, medical, healthcare and pharmaceutical industries.

Category Archives: Controller- Programmable

Motion Control – Four Axes Positioning Stages

Motion Control – Maxon Partners with MassRobotics

Motion Control – Open Aperture XY Alignment Stages

Motion Control – High Force Linear Servo Motor!

Motion Control – XYZ-Goniometer Positioning Stages

Motion Control – Custom Gearmotors

Motion Control – Motion Controllers for Servos and Steppers!

Motion Control – Vertical Lift Stage

Motion Control – Linear Focus Actuator

Motion Control – 0.03 micron Resolution Elevator Stage!

Motion Control – Miniature Linear Focus Actuator

Motion Control – New Single Axis Motion Controller!

This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

Motion Control – Maxon’s Driven Magazine

Motion Control – Yaw and Pitch Stages

Motion Control – Frameless Servos for Robots

Motion Control – Open Aperture XY Alignment Stage

Motion Control – Mecademic Robotics releases new firmware!

Categories

Recent Posts