Category Archives: Controller – Voice Coil Motors

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — motion control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices!

motion control - Voice Coil Motor Controller

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

Motion Control – Voice -Coil Stage
motion control - electric cylinder

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor.  Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force.  The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing.  The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections.

Motion Control – SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply!

motion control - voice coil motor power supply


Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

motion control - miniature components

Motion Control Components – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

Motion Control Components  – Sub-micron Positioning Linear Stage!
motion control - miniature stagemotion control - Miniature actuators

 

 

Forestville, CA – Motion Control Components – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

Motion Control – Mecademic Robotics releases new firmware for its Meca500 robot, available from Electromate!

Motion Control – Mecademic Robotics releases new firmware!

motion control - electromate robotics


motion control - electromate roboticsVaughan, Ontario, Canada — Motion Control Products — Mecademic is pleased to release firmware version 8.4 for its
Meca500 industrial robotic arm. Mecademic’s firmware releases are provided free of charge, along with complimentary technical support.

Features & benefits

Joint 6 multi-rotation with cartesian moves

Although rotating Joint 6 beyond the ±180° has always been possible with the Meca500 R3, it was limited to Joint-move-commands. With this new firmware, both point-to-point and linear commands can now be used outside of this limit. Apart from the benefit of no longer being limited in Cartesian space and requiring switching to Joint commands, new applications are now easier to implement directly with the Meca500.

Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!

Motion Control – Miniature Parallelogram Voice Coil Stage!

motion control - miniature stages


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.

Motion Control – Metric Dimensioned Linear Voice Coil Motors are Now Available from Moticont!

Motion Control – Metric Dimensioned Linear Voice Coil Motors!

motion control - voice coil motors

motion control - moticont

 

 

Van Nuys, CA — Motion Control – Moticont has added Metric dimensioned motors to their popular LVCM Series of Linear Voice Coil Actuators! An example is the miniature LVCM-022-013-01M Linear Voice Coil Actuator. At 22.2 mm (0.875 in.) in diameter and at mid-stroke just 20.7 mm (0.81 in.) long, this new metric miniature voice coil actuator has a continuous force of 4.0 N (14.5 oz) and a peak force of 12.7 N (45.7 oz), and features a 6.4 mm (0.25 in.) stroke.

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

 

 

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Robotic Cycloidal Gearbox from GAM is available from Electromate!

Motion Control – Robotic Cycloidal Gearbox!

motion control- cycloidal gearbox


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque. The GCL series is available in a wide range of sizes with ratios from 36:1 to 192:1.

Motion Control – Electromate extends its product portfolio to include Robots from Mecademic!

Motion Control – Electromate adds Robots from Mecademic!

motion control - electromate robotics

Electromate’s new partnership with Mecademic will expand its reach to end users and manufacturers needing ultra compact and precise industrial robots across Canada.

 

 

 

TORONTO, Ontario — Electromate Inc., a leading Canadian Distributor of Precision Robotic & Mechatronic Solutions, today announced a partnership with Mecademic, a Montreal based premier manufacturer of the world’s smallest, most compact, and precise industrial robots.

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

motion control - electromate


motion control - electromateTORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – New Galil DMC-21×5 Multi Axis Motion Controller is Available from Electromate!

motion control - multi-axis controller

Vaughan, Ontario, Canada — Motion Control Components — The DMC-21×5 is the latest addition to the Econo family and is an easy upgrade path from the long running DMC-21×3 series. The DMC-21×5 utilizes nearly all of the same peripherals as the DMC-21×3 controller, making the transition simple.

motion control - electromate

The main difference between the DMC-21×5 and its predecessor is a state of the art ARM based processor that places its communication, command processing and memory capabilities on par with Galil’s line of current generation motion controllers, while still remaining at the Econo Series price of the DMC-21×3.

Motion Control – Linear Servo Controller Amplifier to Control Voice Coil Motors

motion control servo amplifier

Sunnyvale, CA,   —  Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-commutated devices like voice coil motors.  like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system.  It is comprised of a highly integrated single PC board level product with a cohesive interface.  This card provides current amplification and analog servo control interfaces.  The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.  It was specifically developed for control of motor applications requiring both high temporal and spatial servo precision, such as machine vision, inspection, scientific imaging, medical imaging and other business applications.  This amplifier interfaces directly to many of the Equipment Solution motor/stage solutions.
Besides galvanometers the SCA814 is directly compatible with all the ESI linear voice coil stages and the optical scanners.  A bipolar linear or switching regulated power supply is required by the SCA814 amplifier.  Typically better performance can be achieved when using a linear power supply.  Equipment Solutions has several high-current supplies for this purpose including the SPS15 ±15V DC Switching Power Supply .

Click Here for

  • Specifications
  • Servo Diagram
  • Interface Drawings
  • Downloads

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions, 1098 W. Evelyn Ave. Suite #102; Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog
Powered by WordPress and ThemeMag