Category Archives: Encoders

Motion Control – Positioning Stage Has 3,890 lbs Load Capacity!

Motion Control – Linear Positioning Stage

motion control - linear stages
motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada -Motion control – LINTECH’s 160 series tables are designed to
maximize performance while minimizing physical size and
cost. These tables use a low friction, preloaded, recirculating linear ball bearing system, which rides on precision ground linear rails. The linear rails are mounted to an aluminum base, which offers a rigid support over the entire travel of the table’s carriage.

Motion Control – Maxon’s ESCON Module 24/2 Servo Motor Controller!

Motion Control – Maxon Motors introduces a miniature controller with maximum functionality.

Maxon motion control Servo Motor Controller - Escon24/2

Maxon Logo

Fall River, MA -Motion Control – Maxon Motor expands its offering of miniaturized controllers with its latest OEM plug-in module. This high performance 4-quadrant PWM servo motor controller is designed to command permanent-magnet-activated brushed and brushless DC motors with Hall sensors up to 48 Watt continuous output and 144 Watt peak output. Its features include: high usability, exceptional performance and power density in servo motor controller technology. It is unprecedented in functionality, protection, and performance.

In addition, the entire maxon ESCON servo controller line now offers new functionality: an RC servo signal evaluation for speed or current set values, current limiter and offset, or the option to predefine analog speed ramps.

The innovative Motion Control OEM plug-in module features excellent controller characteristics. The drift-free yet extremely dynamic speed behavior enables speeds up to 150,000 rpm. It provides extensive functionality with free configurable digital and analog inputs/outputs and can be operated in various modes, such as speed controller (closed loop), speed controller (open loop), and current controller. A perfect match for maxon’s motor range, the miniaturized ESCON Module 24/2 suits even the highest-demanding applications and most dynamic drive solutions. Plus, it easily integrates into complex applications with little effort.

A detailed Motherboard Design Guide is available for integration to OEM PCBs and a suitable motherboard makes initial commissioning a simple task. This allows the OEM to focus on the development of their own device and simply rely on maxon’s expertise for the motor control part that is provided in the ESCON module.

The compact servo controller is controlled by an analog set value. It can be specified by means of analog voltage, by external potentiometer, by defined value, by means of PWM signal, or with RC servo signal with variable duty cycle. Other key features include the ability to enable or disable the power stage depending on the direction of rotation as well as acceleration and deceleration by employment of defined speed ramps. The speed can be controlled by means of digital incremental encoder (2 channel, with/without Line Driver), DC tacho, or Hall sensors.

Startup in no time

Top performance should not be a matter of trial and error. For that reason the servo controller has been designed to be user friendly and with easy startup functionality. No in-depth knowledge of drive technology is required for operating.

When connected to a PC via a USB port, it can easily and efficiently be parameterized with the graphical user interface «ESCON Studio». A variety of functions and user-friendly wizards as well as a well-designed automated fine-tuning controller procedure assist during commissioning, for configuration of inputs and outputs, and diagnostics.

Protection at its best

The ESCON Module 24/2 features protective circuitry against overcurrent, excess temperature, undervoltage and overvoltage, voltage transients and short-circuits in the motor cable. It also is equipped with protected digital inputs and outputs and adjustable current limitation to protect motor and load. Motor current and actual motor shaft speed can be monitored by means of analog output voltage.

Pure flexibility and top efficiency

The wide range of both input voltage and operating temperature of +60°C (140°F) and a surplus derating allow flexible use in almost all drive solutions, such as small electronic appliances and equipment engineering or robotics. With its exceptional efficiency of 92% and miniature dimensions, the ESCON Module 24/2 is a number one choice for mobile, highly efficient yet consumption-optimized applications.

For more information on the ESCON servo motor controller range, visit http://escon.maxonmotor.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

 

Maxon Logo
Order Our Catalog

Motion Control – ADVANCED Motion Controls 60Amp Micro-Sized FlexPro Servo Drives are available from Electromate!

Motion Control – Micro-Sized Servo Drives!

motion control - micro servo drive


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A continuous. The 60A continuous current rating is 33% higher than previous models for the same size making these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded, and Development Board-factors.

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - drone application


motion control - maxon motor

 

Taunton, MA — Motion Control – Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

Motion Control – Frameless Servos for Robots

motion control- frameless motors for robots


Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

motion control - electromate robotics

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – Application – Finding The dark energy of the universe.

Motion Control – Application – Searching for “Dark Energy”!

Motion control – Application- The HETDEX project is the first major attempt to find “dark energy” in the universe. With special spectrographs, the three-dimensional positions of one million galaxies are recorded. In the summer of 2012, the Hobby-Eberly Telescope started scanning the universe – aided by maxon motors every step of the way.

motion control application- hetdex project

Hobby-Eberly Telescope: View of the mirror. The University of Texas at Austin/ A. Sebring. © 2012 HET


motion control - maxon motors

 

Taunton, MA — Motion Control – Application – The Hobby-Eberly Telescope (HET) is located at the McDonald Observatory in West Texas. Its spherical primary mirror consists of 91 identical hexagonal segments, each one meter in size. Together, these individual mirror segments form a mirror with a diameter of almost 11 m, which makes it the largest in the world. The effective aperture of the primary mirror currently amounts to 9.2 m at an opening angle of four arc minutes*.

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control Innovation – Maxon Flat Motors used in Solar Powered Drone

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.
motion control innovation - solar power ed drone

motion control - maxon

 

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Motion Control – Frameless BLDC motor with matching encoder for a wide range of robotics applications!

Motion Control – Frameless BLDC Motor

motion control - frameless motor


motion control - maxon

 

Taunton, MA — Motion Control Products – maxon presents a new frameless BLDC motor with matching encoder that really comes into its own in dynamic applications. This heralds the arrival on the market of several solutions for design engineers grappling with tight spaces.

Innovative motor concepts are the answer to growing market requirements for dynamic response, compactness, and power density. With the EC frameless DT, maxon presents a solution that really packs a punch. The DT50 is the precursor of a new product family developed specifically for dynamic movements. The brushless motor with its frameless concept can be easily integrated into a wide range of applications by design engineers.

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – New Rod-style electric actuator from Tolomatic designed to meet hygienic standards available from Electromate!

Motion Control – Rod-style Electric Actuator!

motion control - linear actuators


motion control - electromate robotics

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Products — A new RSH electric hygienic rod-style actuator from Tolomatic delivers clean, continuous control to automation machinery. RSH actuators are designed to help improve repeatability, enhance quality, reduce contamination potential and increase flexibility of hygienic machine designs, particularly for the food, beverage, medical, healthcare and pharmaceutical industries.

Motion Control – The Mars helicopter made history – with maxon’s precision motors!

Motion Control – Mars helicopter has maxon’s motors!

Space fans are thrilled: NASA’s Ingenuity helicopter has successfully completed its pioneering flight on Mars. This is the first time in the history of powered, unmanned spaceflight that a device has flown in a controlled manner on another planet.

motion control - mars helicopter


motion control - maxonTaunton, MA — Motion Control Products – A short flight for “Ingenuity,” but a big success for unmanned space flight. NASA’s Mars helicopter flew over the surface of the Red Planet for about 40 seconds on Monday, April 19th and landed back on four legs. From NASA’s perspective, this is a historic event similar to the Wright brothers’ first controlled flight in 1903.

With the Mars helicopter, the concept of powered, unmanned, and autonomous flights on foreign planets is being tested. This is comparable to the first Mars rover “Sojourner”, which paved the way for scientific follow-up missions such as “Curiosity” and currently “Perseverance”. “Ingenuity” is about to complete several flights over a period of 30 days, each lasting up to 90 seconds and reaching a maximum altitude of five meters.

Motion Control – Maxon Introduces a New Series of ECX Flat BLDC Motors for a Wide Range of Robotics Applications!

Motion Control – Flat BLDC Motors for Robotics Applications!

motion control - flat bldc motors


motion control - maxon motor

 

 

Taunton, MA — Motion Control Products –

High-torque External-rotor Motors

Maxon presents another innovation in the area of BLDC motors: the ECX flat product family. These external-rotor motors can be configured online and are optimized for maximum performance thanks to the special winding technology, as well as segmented magnets. The ratio of torque to weight and size is second to none and is ideal for use in UAVs (unmanned aerial vehicle) and robotics applications.

Motion Control – Robotic Cycloidal Gearbox from GAM is available from Electromate!

Motion Control – Robotic Cycloidal Gearbox!

motion control- cycloidal gearbox


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Components — GAM announces the release of the new GCL cycloidal gearboxes. The new gearboxes provide high precision and rigidity for horizontal and vertical robotic and motion control applications.

The GCL is designed to withstand the frequent start-stop impact loads of industrial robots and other motion control applications with impact resistance five times nominal torque. The GCL series is available in a wide range of sizes with ratios from 36:1 to 192:1.

Motion Control – Electromate extends its product portfolio to include Robots from Mecademic!

Motion Control – Electromate adds Robots from Mecademic!

motion control - electromate robotics

Electromate’s new partnership with Mecademic will expand its reach to end users and manufacturers needing ultra compact and precise industrial robots across Canada.

 

 

 

TORONTO, Ontario — Electromate Inc., a leading Canadian Distributor of Precision Robotic & Mechatronic Solutions, today announced a partnership with Mecademic, a Montreal based premier manufacturer of the world’s smallest, most compact, and precise industrial robots.

Motion Control – The first e-road bikes and e-MTBs with the lightweight maxon BIKEDRIVE AIR have arrived!

Motion Control – e-road bikes and e-MTBs!

Italian premium road bike manufacturer, Cipollini and Swiss bike manufacturer, TRANSALPES launch their new lightweight e-bikes with the maxon BIKEDRIVE AIR

motion control - application


motion control - maxon motorsTaunton, MA — Motion Control Products – The Cipollini Flusso is a performance e-road bike that weighs only 10.7 kg. With a weight of less than 16 kg, the TRANSALPES E1 sets standards in the electrified trail and enduro segment. Both e-bikes put a natural feel at the center of the riding experience.

There is an emerging trend in the e-bike market towards lightweight systems that are almost indistinguishable from standard bicycles. This development is supported by smaller, more powerful motors and improved battery technologies. “Integration is the key word,” says Michele Tittonel, R&D Coordinator at Cipollini. “The second generation of e-race bikes will be powered by electric motors fully integrated into the bike design and complemented with high-end components.”

Cipollini set out to develop one of the lightest e-race bikes in the world without compromising reliability and duration of assistance. Now the Italian bike manufacturer is introducing the new Flusso, which weighs just 10.7 kg

The Cipollini Flusso is equipped with maxon’s BIKEDRIVE Air system, which weighs just 3.5 kilograms including the battery. At its heart is a mid-mounted motor that delivers 30 Nm of torque. Thanks to a special free-wheel technology it’s easy to pedal even without electric assistance. Michele Tittonel says, “The natural feeling of riding is absolutely crucial; after all, physical effort should remain part of the experience.”

motion control - maxon application

Integration of the drive is also a top priority for the Swiss bike manufacturer TRANSALPES. “With the BIKEDRIVE AIR system from maxon, we want to build perhaps the lightest e-bike for demanding mountain bikers,” as co-owner Michel Juhasz explains. “The new TRANSALPES E1 rides as naturally as a mountain bike without a motor.” TRANSALPES’ lightest e-bike, with a carbon frame, weighs less than 16 kg.

The Cipollini e-road bikes and TRANSALPES e-MTBs can be configured and pre-ordered on the manufacturers’ websites.

For additional information, please visit: www.maxonbikedrive.com or contact us at info.us@maxongroup.com or 508-677-0520.

Also see Maxon-Light-Invisible-E-bike-System.shtml

About Maxon

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon’s trade show experience goes virtual
motion control tradeshow

This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

If you prefer watching an entertaining video introducing all the latest products maxon brought to the market this year, you will find it here: https://youtu.be/Jtw7Hwxbdr4 a> Have fun watching! For more information please contact us at info.us@maxongroup.com or 508-677-0520.

For Information on Maxon’s Virtual Trade Show CLICK HERE

motion control - miniature components


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

View 2021/2022 Maxon Catalog

 

motion control - maxon motors

 

Powered by WordPress and ThemeMag