Category Archives: Frameless Motors

Motion Control – The world’s lightest electric mountain bike features maxon BIKEDRIVE AIR

Motion Control – Application – Mountain Bike

Motion Control – With the new Lightrider E Ultimate, Swiss bicycle manufacturer Thömus is launching the world’s first full-suspension cross-country electric mountain bike weighing less than 15 kilograms. This record-breaking weight is made possible by the small and efficient maxon BIKEDRIVE AIR drive in the extremely lightweight Thömus ultra-high modulus carbon frame.

motion control - lightest mountain bike

Taunton, MA — Motion Control – The partnership between Thömus and drive specialist maxon that began in the winter of 2021 is delivering results not only in World Cup racing. Behind the scenes, a lot of work has been done on a new, ultra-lightweight electric mountain bike in recent months, which, together with the maxon BIKEDRIVE AIR drive, heralds a new era for electric mountain bikes.

motion control - maxon

Weighing less than 15 kilograms in total and with a slim, rigid frame, the Lightrider E Ultimate is a real racing bike that can be maneuvered easily and agilely over any terrain.

Motion Control – Giant Solar-Powered Butterfly Puts the Focus on Climate Change Solutions

Motion Control – Maxon to Host the Solar Butterfly

Motion Control – Seeking climate change solutions, the world’s largest sustainability tour is coming to Taunton, Massachusetts. The solar-powered butterfly is a 30-foot-long tiny house in the shape of a butterfly, which charges the electric vehicle it tows

.

motion control - combating climate change

motion control - maxon motors

 

 

Motion Control – The SolarButterfly is focused on reaching millions of people, alerting them to the companies and individuals that are integral in transitioning societies away from fossil fuels toward clean energy technologies. Presently on a four-year journey around the world, the SolarButterfly plans to identify, record, and publicize at least a thousand climate protection pioneers and their solutions.

Motion Control – New High-Performance Hollow Shaft Gear Unit from Harmonic Drive: The HPF Series

Motion Control – Hollow Shaft Harmonic Drive!

Motion Control – High Torque Outputs and Flexible Installation Options for Heavy-duty Industrial Applications
motion control - harmonic drive
motion control electromate robotics
Vaughan, Ontario, Canada — Motion Control -Harmonic Drive, a leading provider of precision motion control solutions, is proud to announce the release of its HPF series of hollow shaft gear units. Designed for heavy-duty industrial applications, these advanced gear units offer high torque outputs and flexible installation options, making them ideal for use in demanding environments.

Motion Control – Maxon partners with MassRobotics to Support the Advancements of Drive Technology in Robotics

Motion Control – Maxon Partners with MassRobotics

Maxon is teaming up with MassRobotics and other companies, organizations, and leading research centers  to create new innovations across a wide range of applications.

motion control - maxon robotics

Fall River, MA — Motion Control – MassRobotics and maxon announce a partnership to support the robotics innovation ecosystem through collaboration and exploration of motion control technologies around automation and manufacturing-related applications. With maxon’s extensive expertise and knowledge of electric drives, this partnership will support and advance the latest innovations and technologies in motion control with automation-focused companies in the robotics sector.

motion control - maxon

Based in the Boston area, MassRobotics is the first and largest independent nonprofit robotics startup escalator in the world whose mission is to grow and support robotics innovators and entrepreneurs.

Motion Control – Tutorial – When to Choose A 4pole DC Motor

Motion Control – Maxon’s 4pole DC Motors
motion control 4 pole motor tutorial

Selecting a DC micromotor for use in applications from aerospace through to downhole drilling inspection, a 4pole motor has advantages. A 4pole design is stronger than a 2pole equivalent but can also fit within the same space and weight envelope.
motion control - maxon

Fall River, MA — Motion Control – For DC motor applications that require high torque in a light weight and compact space envelope, 4pole motors can be the optimum choice. A 4pole motor can fit within the same footprint as a 2pole design but they are able to generate more torque. Importantly, a 4pole motor is also stronger than a 2pole motor of equivalent size, meaning that it more closely maintains its speed when a load is applied.

Motion Control – Exor’s eX700 series features Harsh Environment Operation!

Motion Control – Harsh Environment Displays

motion control - digital display

EXOR has taken the highly successful harsh environment eTOP500 series and updated it with the recently released eX700 series.

motion control - electromate robotics

 

 

 

Greenville, DE – Motion Control – This natural progression allows you to combine a high-performance sunlight readable display with state-of-the-art connectivity such as OPC UA. TeX700G Series combine high-performance sunlight-readable display with state-of-the-art connectivity features and top performance in a great design maintaining as a design commitment the fact that the product is likely to be used in environments where the safety of operators is at risk.

Motion Control- Application – Underwater inspection on twelve wheels.

Motion Control – Application – Underwater Inspection

Motion Control – Application – Inspecting flooded pipes of power plants requires skilled, high-precision handling. And the robotic vehicles have to be optimized accordingly, for example to dive 20 m deep. The new seawater manipulator is capable of maneuvering underwater in pipes, where it can be used to perform inspections. RE motors by maxon are responsible for the dynamic drive of the robot.

motion control - application

motion control - maxon motor

 

 

Taunton, MA — Motion Control Application – In robotics, manipulators are those devices that enable physical interaction with their surroundings. For this interaction, the robotic vehicles are equipped with appropriate tools, gripper systems or measuring devices. In the case of the seawater manipulator, this equipment largely consists of high-performance cameras used for pipe inspection. Ibass, from Augsburg in Germany, develops, manufactures and distributes manipulators for various in-pipe applications: inspection, grinding, welding, retrieval or suction.

Motion Control – Latest Generation Single Axis Motion Controller from Galil

Motion Control – New Single Axis Motion Controller!

 This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

motion control - advanced single axis controller


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

  • Available as a compact card-level or box-level unit
  • Connects to a stepper or servo motor amplifier of any power range
  • Can be purchased with an internal 800-Watt brushless sine drive   or microstepping drive which minimizes space, cost, and wiring
  • Operates stand-alone or can be networked to a PC via Ethernet
  • Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.

Features include:

  • Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
  • Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
  • Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
  • Non-volatile memory for programs, variables, and arrays.
  • Concurrent execution of four programs.
  • Optically isolated forward and reverse limit inputs and homing inputs
  • 8 uncommitted, isolated inputs and 4 isolated outputs
  • High speed position latch and output compare
  • 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
  • Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control -innovation award

 

 

For more information on the “Innovation and Technology Award”

CLICK HERE!

 

 

motion control - components

 

 

For more information on the “2021 Excellence Award”

CLICK HERE!

 

 

motion control - products

 

 

For more information on the “Best Place to Work” CLICK HERE!

 

 

 

 

For more information on the “AHTD Award” CLICK HERE!

 

 

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Motion Control - electromate robotics

Motion Control – Positioning Stage Has 3,890 lbs Load Capacity!

Motion Control – Linear Positioning Stage

motion control - linear stages
motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada -Motion control – LINTECH’s 160 series tables are designed to
maximize performance while minimizing physical size and
cost. These tables use a low friction, preloaded, recirculating linear ball bearing system, which rides on precision ground linear rails. The linear rails are mounted to an aluminum base, which offers a rigid support over the entire travel of the table’s carriage.

Motion Control – Maxon’s ESCON Module 24/2 Servo Motor Controller!

Motion Control – Miniature Servo Motor Controller

motion control - miniature servo motor controller

motion control - maxon

 

 

Taunton, MA -Motion Control – Maxon Motor expands its offering of miniaturized controllers with its latest OEM plug-in module. This high performance 4-quadrant PWM servo motor controller is designed to command permanent-magnet-activated brushed and brushless DC motors with Hall sensors up to 48 Watt continuous output and 144 Watt peak output.

Motion Control – ADVANCED Motion Controls 60Amp Micro-Sized FlexPro Servo Drives are available from Electromate!

Motion Control – Micro-Sized Servo Drives!

motion control - micro servo drive


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — ADVANCED Motion Controls has released 7 new micro-sized FlexPro servo drives rated to output 60A continuous. The 60A continuous current rating is 33% higher than previous models for the same size making these our highest power-density servo drives to date. This offering includes PCB Mount, Machine Embedded, and Development Board-factors.

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - drone application


motion control - maxon motor

 

Taunton, MA — Motion Control – Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

Motion Control – Frameless Servos for Robots

motion control- frameless motors for robots


Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

motion control - electromate robotics

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – Application – Finding The dark energy of the universe.

Motion Control – Application – Searching for “Dark Energy”!

Motion control – Application- The HETDEX project is the first major attempt to find “dark energy” in the universe. With special spectrographs, the three-dimensional positions of one million galaxies are recorded. In the summer of 2012, the Hobby-Eberly Telescope started scanning the universe – aided by maxon motors every step of the way.

motion control application- hetdex project

Hobby-Eberly Telescope: View of the mirror. The University of Texas at Austin/ A. Sebring. © 2012 HET


motion control - maxon motors

 

Taunton, MA — Motion Control – Application – The Hobby-Eberly Telescope (HET) is located at the McDonald Observatory in West Texas. Its spherical primary mirror consists of 91 identical hexagonal segments, each one meter in size. Together, these individual mirror segments form a mirror with a diameter of almost 11 m, which makes it the largest in the world. The effective aperture of the primary mirror currently amounts to 9.2 m at an opening angle of four arc minutes*.

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control Innovation – Maxon Flat Motors used in Solar Powered Drone

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.
motion control innovation - solar power ed drone

motion control - maxon

 

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Powered by WordPress and ThemeMag