motion control automation

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

July 27, 2023 Editor-Publisher

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder. Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability. The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification.

Motion Control – Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution!

June 22, 2023 Editor-Publisher

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Van Nuys, CA – Motion Control Components – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.).

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

June 12, 2023 Editor-Publisher

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages. The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation. These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

OES – All New! High Precision, Three-axis Gimbal Mounts with Four Motor Options Offer Greater Flexibility and Stability!

June 08, 2023 Editor-Publisher

OES – NEW! Three-axis Gimbal Mounts!

Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below the center line of rotation allowing for the positioning of: Cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications on their respective centerlines.

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

May 18, 2023 Editor-Publisher

Motion Control – Open Aperture XY Alignment Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes. These new low profile 87 mm (3.425 in.) high XY stages, have a 188 mm x 188 mm (7.401 in. x 7.401 in.) open aperture. Easy integration of tooling and fixtures is facilitated through a precision series of threaded mounting holes.

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

April 20, 2023 Editor-Publisher

Motion Control – XYZ-Goniometer Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages. Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z axis stages with 15 mm, 30 mm, 50 mm, 75 mm, or larger than 100 mm of linear travel linear in any combination of X, Y, and Z axes. These stages are the ideal choices for: Crystallography, metrology, light measurement, mirror positioning, laser scanning, drilling and machining, reverse engineering, inspection, assembly, measurements, tracking, and inspection and optical bench applications.

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

March 30, 2023 Editor-Publisher

Motion Control – Motion Controllers for Servos and Steppers!

Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one to four axes of motion for users without prior motion control experience. These MCC controllers integrate a motion control card and operator interface in one package. Having a user-friendly interface, they allow the user to operate the motion controller, without the need for a PC, PLC, host controller, or programming.

The modes of operations are: Set Acceleration, Set Velocity, Set Position, Absolute Move, Relative Move, Find Home, Reset Position Counter, Go to Position Zero, Joystick Operation and Stop All Motors. The MCC Controllers feature a 4-Line LCD, 32-button keypad, STEP and DIRECTION outputs for each axis.

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

February 16, 2023 Editor-Publisher

Motion Control – 0.03 micron Resolution Elevator Stage!

motion control - elevator stage

Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables and 20 mm of vertical travel. High precision ball bearing profile rails assure very high parallelism and smooth motion throughout the raising and lowering of the table. These Z-Axis Stages are ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

January 09, 2023 Editor-Publisher

Motion Control – Open Aperture XY Stages!

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

October 26, 2022 Editor-Publisher

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

The YP100-45 Series of Yaw-and-Pitch Stages were developed through the integration of a rotary stage (yaw axis) and a goniometer (pitch axis) having a travel range of +/- 45 degrees.

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

October 13, 2022 Editor-Publisher

Motion Control – Precision Positioning Stages!

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages. When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws. For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

August 05, 2022 Editor-Publisher

Motion Control – High Precision Linear Stages

Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.).

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

April 29, 2022 Editor-Publisher

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification.

Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!

January 13, 2022 Editor-Publisher

Motion Control – Joysticks

Van Nuys, CA – — OES (Optimal Engineering Systems, Inc.) has expanded its line of Joysticks for 1, 2 and 3 axis Stages and Actuators. These are easy to use, single-handed, ergonomic joysticks that provide proportional control of the X, Y, and Z axis of from one to three actuators. Low, medium, and high speed ranges are button selectable. The X, Y, and Z axis speeds are controlled by the tilt angle of the handle and the angle of rotation of the knob.

The maximum speeds may be set by the user via the supplied, easy to use GUI.

Low Cost, Plug-and-Play, One, Two, Three, and Four Axis Joystick Motion Controllers from OES!

June 28, 2017 Editor-Publisher

Motion Control Components - Joy Stick from OES

Van Nuys, CA – — Motion Control Components – Ergonomic, easy to use, and integrated Joystick motion controllers for steppers, DC motors, and servo motor drivers in one, two, three, and four axis models are available from OES (Optimal Engineering Systems, Inc.). Users can choose from 18 models providing: Step and Direction signals per axis, Quadrature signals per axis, Analog Signals per axis and PWM and Direction signals per axis. The tilt angle of the joystick controls the speed of motion. The three, button selected, speed ranges are high speed, medium speed, and slow speed. These, low cost, long life, Joysticks have a 5.5 feet long cord and the standard connector is a 25-pin-DB-25, male connector. The maximum speeds may be set by the user via the supplied, easy to use GUI.

Two slide switches engage/disengage the joystick for shipping. The footprint of the joystick is 4.76 inches wide by 7.80 inches long. OES also offers complete Plug-and-Play systems including, motors, encoders, drivers, and cabling.

The AU300-XZ Motorized Three-axis Gimbal Mount can be ordered as a complete plug-and-play system with a multi-axis controller, joy stick, track ball, or keypad, and with a 30 mm thru hole in the roll stage.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Category Archives: Joysticks

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Motion Control – 600 MM Vertical Lift Stages

Motion Control – Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution!

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

Motion Control – Four Axes Positioning Stages

OES – All New! High Precision, Three-axis Gimbal Mounts with Four Motor Options Offer Greater Flexibility and Stability!

OES – NEW! Three-axis Gimbal Mounts!

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

Motion Control – Open Aperture XY Alignment Stages

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

Motion Control – XYZ-Goniometer Positioning Stages

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

Motion Control – Motion Controllers for Servos and Steppers!

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

Motion Control – 0.03 micron Resolution Elevator Stage!

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw and Pitch Stages

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

Motion Control – High Precision Linear Stages

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Motion Control – Joysticks for Controlling the X, Y, and Z Axes of 1, 2 and 3 axis Stages and Actuators are Plug-and-Play, and Low Cost!

Motion Control – Joysticks

Low Cost, Plug-and-Play, One, Two, Three, and Four Axis Joystick Motion Controllers from OES!

Categories

Recent Posts