Category Archives: Linear Drive

Motion Control – Product Releases Published Free!

Linear Motion Products Published FREE!

Get your Linear Motion Product published for FREE on https://linearmotionblogger.com! For details go to  https://motioncontrolmarketing.com

Fluid Power Products Published FREE!

Get your Fluid Power Products published FREE on http://fluidshop.com! For details go to https://motioncontrolmarketing.com

These are limited time offers

Motion Control – 5 Micron Resolution, Zero Backlash, Zero Cogging, High Speed Direct Drive Linear Motor With Integrated Encoder!

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added another linear motor to its SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. The SDLM-051-095-01-05 is a powerful, compact linear actuator measuring just 2.00 in. (50.8 mm) in diameter and 3.75 in. (95.3 mm) long. It has a 1.0 in. (25.4 mm) stroke and features a resolution of 5 microns (0.000197 in.).

motion control - moticont

The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible bandwidth and accuracy and is protected by the housing. This fully enclosed linear motor features a continuous force rating of 7.6 lbs (33.9 N) and a peak force of 24.1 lbs. (107.2 N) at 10% duty cycle.

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems

motion control - stepper motor controller


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

Motion Control Application – Open Screw Drive System Moves Heavy Sound Stage Sets Smoothly, Quickly, and Quietley!

Motion Control Application – High Speed Drive System

motion control - application


motion control - lm76E. Longmeadow, MA –Motion Control Application-

Problem: Move heavy sets on a sound stage smoothly, quickly, and most importantly quietly! Ball screws specified in the original design proved unacceptable due to the limited length of travel, screw deflection which resulted in a lack of smoothness, and high noise levels. A rack and pinion was also considered but the noise level was also too high and there was no room for a gearbox. Linear motors are quiet however the cost was prohibitive, and a belt system could not handle the heavy loads.

Solution: The new Streamliner Open Screw Drive System from Winner was selected by the production company to move the heavy sets on the sound stage.

Motion Control – LDL25 Series Linear Actuator, available from Electromate, is a cost-competitive alternative to pneumatics!

Motion Control – Linear Actuator

Cost-competitive Alternative to Pneumatics, Starting at $300 US/ea
motion control - electromate logo

motion control - linear actuator

 

 

Vaughan, Ontario, Canada — Motion Control Components — The LDL has been designed as a cost-competitive alternative to pneumatics. A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: control, cycle life, operating cost and environment, etc. The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US.

Motion Control – NEW! High Speed Integrated Bearing and Drive System Features +/- 5 Microm Repeatability!

Motion Control – High Speed Integrated Bearing and Drive System

motion control - high speed drive system
motion control - lm76

E. Longmeadow, MA –Motion Control – LM76 is the Exclusive North American Distributor of a new high speed integrated bearing and drive system featuring +/- 5 micron repeatability, and zero backlash! This new X-Axis BE125-10 Open Screw Drive System sets new standards for: Length of travel, speed, and precision for Cartesian Robots (robots that move in X,Y and Z axes according to Cartesian Coordinates also know as rectangular coordinates) and single axis linear stages!

The new X-Axis BE125-10 Open Screw Drive System is a compact linear stage measuring 125 mm (4.921 in.) wide x 86 mm (3.386 in.) high x 4391 mm (172.874 in.) long and can handle dynamic loads to 500 kg (1102 lbs). The standard stroke length is 4000 mm (157.480 in.) and custom stroke lengths to 10 m (32.8 ft) can be specified.

Motion Control – Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control Voice coil motor with temperature sensor

Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy.

motion control - moticont

Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticint

 

Motion Control – Match One of These Compact 1.0 Inch Diameter Voice Coil Motors to Your Application’s Stroke Requirements!

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added to it’s line of Linear Voice Coil Motors, LVCM, two 1.000 in. (25.4 mm) diameter motors. The LVCM-025-022-01 has a stroke length of 0.375 in. (9.5 mm) a mid-stroke length of 1.30 in. (33 mm) and it has a high force to size ratio of 16.9 oz (4.7 N) and a peak force of 53.5 oz. (14.9 N) at 10% duty cycle. The LVCM-025-029-01 has a stroke length of 0.625 in. (15.9 mm) a mid-stroke length of 1.68 in. (43 mm) with a continuous force of 18.2 oz (5.1 N) and a peak force of 57.7 oz. (16.0 N) at 10% duty cycle. These compact, high-force-to-size ratio motors are ideal for: work holding and clamping, medical devices, assembly, testing, laser machining and drilling, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering.

These clean, quiet, efficient, low inertia, high acceleration, brushless high speed linear motors have zero cogging and features high accuracy, and high repeatability when operated in a closed loop as a DC servo motor. -Each of these motors features a 10-32 UNC-2B threaded mounting hole in the center of the housing and two 6-32-UNC-2B threaded mounting holes on the coil end to easily add one of these motors to new or existing applications.

Metric series threads are available in production quantities and complete plug-and-play systems including an encoder and controller are also available.

Is there a need for a smaller or larger diameter motor, one with longer travel, or more force? There are 12 series of Moticont’s LVCM series motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


MotiCont-Logo
Visit our Website
Other Products
Videos

 

 


Powered by WordPress and ThemeMag