Category Archives: Linear Motion Stage

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices!

motion control - Voice Coil Motor Controller

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw and Pitch Stages

motion control - yaw pitch stage


Van Nuys, CA – Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

motion control - stage

The YP100-45 Series of Yaw-and-Pitch Stages were developed through the integration of a rotary stage (yaw axis) and a goniometer (pitch axis) having a travel range of +/- 45 degrees.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!

motion control XZR Stage
motion control - stage

 

 

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

Motion Control – Voice -Coil Stage
motion control - electric cylinder

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor.  Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force.  The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing.  The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections.

Automation Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   Motion Control —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

Motion Control – XYZ Axis Voice Coil Actuator

motion control - 3 axis voice coil stage

Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm).
motion control - moticint

 

The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

 

 

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – Very Stable, High Precision, High Load, Low Cost Motorized Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage
motion control - vertical lift stage

motion control -oes

 

 

 

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw Pitch Stages

motion control - yaw pitch stages

motion control - OES Components

 

 

 

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Low Cost, High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - linear motion stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – The Engineering Edge – FDA/USDA/3A-Dairy Compliant Linear Motion Bearings!

Motion Control – USDA/FDA/3A-Dairy Compliant Linear Motion Components

motion control - metric linear bearings
LM76 offers Metric FDA/USDA/3A-Dairy compliant self-lubricating linear bearings for: Food Processing, Packaging, Bio/Pharmaceutical, and Medical Systems!

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Miniature Voice Coil Servo Motors Feature: High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – Miniature Voice Coil Servo Motors!

motion control - electric cylinder
Van Nuys, CA – Motion Control – The GVCM-016-013-01 and GVCM-016-013-01M (Metric Version) Linear Voice Coil Servo Motors have been released by Moticont. These small 0.625 in. (15.9 mm) diameter Servo motors, also called Electric Cylinders, have a stroke length of 0.250 in. (6.4 mm), a high force to size ratio of 5.7 oz (1.6 N) continuous force and 17.9 oz (5.0 N) of peak force. The housings measures just 0.500 in. (12.7 mm) long and in the fully extended position the shaft extends 0.53 in. (13.5 mm) beyond the face of the housing. The ends of the shafts are threaded: 2-56 UNC-2B by 0.16 in. long and M2.2X0.45 by 4.0 mm long for backlash free connections.

motion control - moticont

 

 

These miniature motion control linear servo motors feature high acceleration/deceleration, high speed, high reliability, and zero backlash.

Motion Control – FDA/USDA/3-A Dairy Compliant Linear Motion Components

Motion Control – FDA/USDA and 3A-Dairy Compliant Bearings!

Motion Control - FDA compliant bearings


motion control - linear bearingsE. Longmeadow, MA – Motion Control Components – Linear Motion – Linear Motion – LM76 FluidLine Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell.

Motion Control – Product Releases Published Free!

Linear Motion Products Published FREE!

Get your Linear Motion Product published for FREE on https://linearmotionblogger.com! For details go to  https://motioncontrolmarketing.com

Fluid Power Products Published FREE!

Get your Fluid Power Products published FREE on http://fluidshop.com! For details go to https://motioncontrolmarketing.com

These are limited time offers

Motion Control – 1 Inch Diameter Open Aperture Voice Coil Motor Has 1 Inch Stroke and High Force-to-Size Ratio!

Motion Control – Open Aperture Voice Coil Motor!

motion control - voice coil motor

motion control - moticont

 

 

Van Nuys, CA — The 1.00 inch body diameter open aperture voice coil linear motor, the HVCM-025-038-003-02, featuring an open aperture and high force-to-size ratio is introduced by Moticont. This small brushless servo motor is capable of high acceleration, deceleration, high speed, zero cogging, and zero backlash when connected directly to a load. All HVCM open aperture brushless servo motors are extremely quiet, clean room compliant, and capable of high precision when used in closed loop applications. This DC voice coil servo motor has a continuous force rating of 1.0 lbs (4.6 N) and a peak force of 3.2 lbs (14.4 N) at a 10% duty cycle.

Motion Control – Customizable Lintech 100 Series Screw Driven Linear Stages That Ship In 1 Week Are Available from Electromate!

Motion Control – Linear Stages

motion control - linear stagesMotion Control Stages  – Lintech’s 100 Series Positioning Tables set the standard for high performance and value.

motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Acme Screw or Ball Screw Driven Linear Motion: The Lintech motion control 100 series linear positioning slides are designed to maximize performance while minimizing physical size and cost.

Powered by WordPress and ThemeMag