Category Archives: Motors – Miniature

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

Motion Control – Maxon’s Driven Magazine

motion control driven magazine

 

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application.  An application that could be on Mars, under water, or even implanted in the human body!

motion control - maxon

 

 

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application.   

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors!

Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications

motion control - mini planetary gearmotors


motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  TThese gearmotors are used in applications where space is critical.  Small motors usually don’t produce enough torque for demanding applications.  Mini Planetary Gearmotors are an ideal solution.  They offer an increase in torque, and better inertia matching without breaking the budget.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - drone application


motion control - maxon motor

 

Taunton, MA — Motion Control – Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Application – maxon drives are used in the rover and in the first Mars helicopter

Motion Control – Application – Maxon Goes to Mars!

motion control - mars helicopter and rover


motion control - maxon motors

The Helicopter is Still Flying …

… 28 Trips and Counting!

Taunton, MA — Motion Control – Application – DC motors from maxon have been used in virtually all successful robot missions on Mars. More than 100 of these drives from Switzerland are already on the Red Planet and the number will go up again when the Perseverance rover starts its work. Its mission is to collect soil samples on Mars that will be analyzed on Earth later. The rover also carried the Ingenuity helicopter drone, which will be performing the first flights on the Red Planet. maxon’s precision motors and gearheads are used in numerous mission-critical tasks.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – Application – Finding The dark energy of the universe.

Motion Control – Application – Searching for “Dark Energy”!

Motion control – Application- The HETDEX project is the first major attempt to find “dark energy” in the universe. With special spectrographs, the three-dimensional positions of one million galaxies are recorded. In the summer of 2012, the Hobby-Eberly Telescope started scanning the universe – aided by maxon motors every step of the way.

motion control application- hetdex project

Hobby-Eberly Telescope: View of the mirror. The University of Texas at Austin/ A. Sebring. © 2012 HET


motion control - maxon motors

 

Taunton, MA — Motion Control – Application – The Hobby-Eberly Telescope (HET) is located at the McDonald Observatory in West Texas. Its spherical primary mirror consists of 91 identical hexagonal segments, each one meter in size. Together, these individual mirror segments form a mirror with a diameter of almost 11 m, which makes it the largest in the world. The effective aperture of the primary mirror currently amounts to 9.2 m at an opening angle of four arc minutes*.

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

Motion Control – Voice -Coil Stage
motion control - electric cylinder

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor.  Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force.  The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing.  The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections.

Automation Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   Motion Control —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Motion Control Application – Lab automation is getting even smaller

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

moption control - miniature motors

motion control - maxon

 

 

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control Components – Miniature Voice Coil Motor Features High Force to Size Ratio!

Motion Control – Miniature Voice Coil Motor
motion control - voice coil motor

 

motion control - moticont

 

Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-01, from Moticont features a high force-to-weight ratio of 14.5 oz. (4.0 N) continuous force and 45.7 oz. (12.7 N) peak force in a compact 0.875 in. (22.2 mm) diameter x 0.50 in. (12.7 mm) long package. This clean, quiet, efficient, low inertia, high acceleration, high speed motor has zero cogging and features high accuracy, and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop as a DC servo motor.

Motion Control – Application- Intra-aortic pump powered by miniature brushless DC motors provides heart failure patients an aid to help hearts rest and heal!

Motion Control – Application – Heart Pump
The Maxon EC 6 motor brushless DC motor is the second smallest drive in the maxon family.

motion control - maxon application

 


motion control - maxon

 

Fall River, MA — Motion Control – Components – Application – Chronic heart failure patients draw hope from a new technology. A team of life science entrepreneurs in Houston, Texas has developed the first catheter-deployed circulatory assist device intended for long-term use. Procyrion, Inc.’s Aortix™ provides a minimally invasive treatment option for the more than two million chronic heart failure patients in the USA alone who are too sick for medication. This pre-clinical cardiologist tool dramatically reduces risks associated with circulatory support devices and enables treatment of younger, healthier patients before progressive damage occurs.

Motion Control – Application – Maxon Motors in Surgical Robots for Minimally Invasive Procedures!

Motion Control – Motors for Surgical Robots!

Motion control – The latest, next generation surgeries are being performed today using Intuitive Surgical Inc.’s (Sunnyvale, CA) da Vinci™S HD Surgical System, which allows surgeons to perform the most minimally invasive procedures to date. The system incorporates the height of motion control technologies so that every motion provides the smooth, accurate movements reminiscent of a skilled surgeon – even at slow, calculated speeds.

motion control - robot


motion control - maxon logo

 

Taunton, MA — Motion Control Products – The surgical system itself requires only the use of two 8- and one 12-mm wide hole in a patient, for insertion of the two surgical manipulators and a camera. Only the robot and surgical assistants stand over the patient, while the surgeon, the system operator, can be across the room at the Surgeon’s console where even the look and feel of the open surgery is duplicated with precision.

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Miniature Voice Coil Servo Motors Feature: High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – Miniature Voice Coil Servo Motors!

motion control - electric cylinder
Van Nuys, CA – Motion Control – The GVCM-016-013-01 and GVCM-016-013-01M (Metric Version) Linear Voice Coil Servo Motors have been released by Moticont. These small 0.625 in. (15.9 mm) diameter Servo motors, also called Electric Cylinders, have a stroke length of 0.250 in. (6.4 mm), a high force to size ratio of 5.7 oz (1.6 N) continuous force and 17.9 oz (5.0 N) of peak force. The housings measures just 0.500 in. (12.7 mm) long and in the fully extended position the shaft extends 0.53 in. (13.5 mm) beyond the face of the housing. The ends of the shafts are threaded: 2-56 UNC-2B by 0.16 in. long and M2.2X0.45 by 4.0 mm long for backlash free connections.

motion control - moticont

 

 

These miniature motion control linear servo motors feature high acceleration/deceleration, high speed, high reliability, and zero backlash.

Motion Control – Frameless BLDC motor with matching encoder for a wide range of robotics applications!

Motion Control – Frameless BLDC Motor

motion control - frameless motor


motion control - maxon

 

Taunton, MA — Motion Control Products – maxon presents a new frameless BLDC motor with matching encoder that really comes into its own in dynamic applications. This heralds the arrival on the market of several solutions for design engineers grappling with tight spaces.

Innovative motor concepts are the answer to growing market requirements for dynamic response, compactness, and power density. With the EC frameless DT, maxon presents a solution that really packs a punch. The DT50 is the precursor of a new product family developed specifically for dynamic movements. The brushless motor with its frameless concept can be easily integrated into a wide range of applications by design engineers.

Motion Control – Maxon Expands its range of configurable drives!

Motion Control – Miniature Configurable Drives!

Maxon is once again expanding its range of configurable drives with more brushless DC motors, gearheads, and encoders from the ECX series.


motion control - maxon

 

 

Taunton, MA — Motion Control Products – The ECX series is growing with the addition of the maxon ECX Speed 4. This tiny powerhouse with a diameter of only 4 millimeters is designed for use in medical technology. The brushless DC motors are available in 2 versions: M (medium) and L (long) and can reach speeds of up to 50,000 rpm. They can be combined with the new GPX 4 C gearheads, which are available as two, three, or four-stage versions. With the GPX planetary gearheads, the pressure angle of the toothing has been optimized to achieve longer uptimes.

Motion Control – 1 Inch Diameter Open Aperture Voice Coil Motor Has 1 Inch Stroke and High Force-to-Size Ratio!

Motion Control – Open Aperture Voice Coil Motor!

motion control - voice coil motor

motion control - moticont

 

 

Van Nuys, CA — The 1.00 inch body diameter open aperture voice coil linear motor, the HVCM-025-038-003-02, featuring an open aperture and high force-to-size ratio is introduced by Moticont. This small brushless servo motor is capable of high acceleration, deceleration, high speed, zero cogging, and zero backlash when connected directly to a load. All HVCM open aperture brushless servo motors are extremely quiet, clean room compliant, and capable of high precision when used in closed loop applications. This DC voice coil servo motor has a continuous force rating of 1.0 lbs (4.6 N) and a peak force of 3.2 lbs (14.4 N) at a 10% duty cycle.

Powered by WordPress and ThemeMag