Category Archives: Positioning Stage – Miniature

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices!

motion control - Voice Coil Motor Controller

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

 

 

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – RVC-1008 Miniature Rotational Voice Coil Stage from Equipment Solutions

Motion Control – Miniature Rotational Voice Coil Stage

motion control- miniature stage

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.

motion control - equipment solutions

 

 

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA – Motion Control – The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - miniature components

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Motion Control – SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply!

motion control - voice coil motor power supply


Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

motion control - miniature components

Motion Control Components – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

Motion Control Components  – Sub-micron Positioning Linear Stage!
motion control - miniature stagemotion control - Miniature actuators

 

 

Forestville, CA – Motion Control Components – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!

Motion Control – Miniature Parallelogram Voice Coil Stage!

motion control - miniature stages


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

 

 

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – the LFA-3403 Is an Open Aperture Linear Focus Actuator from Equipment Solutions

Motion Control –  Open Apeture Linear Focus Actuator

motion control - linear focus actuator

LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motion Control – Rotational Voice Coil Stage quickly and repeatably steers an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

Motion Control – Rotational Voice Coil Stage

Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree optical step-and-settle in less than 5ms; Fully integrated servo controller; USB 2.0 and auxilary user electrical interfaces; X 58 x 28 x 21 millimeters, 30 grams

motion control - miniature stages

Forestville, CA – The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and accurately set an angular position. The frequency is factory adjusted to customer specifications during the manufacturing process. Amplitude of the resonating mirror can be adjusted through either an analog input voltage or the USB interface.

motion control - miniature components

An optional high-resolution position feedback sensor can be monitored by an analog output signal on the User Connector. The RS-25 Resonant Scanner can also be configured with a high-resolution 16-bit Analog to Digital Converter to quickly sample and report the mirror position at any moment if the position sensor is included.

Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Miniature Hollow Core Rotary Stage

motion control - rotary table


motion control - OESVan Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the standard 2-phase 1.8 degree stepper motor is only 58 mm (2.283 in) by 100.5 mm (3.957 in ). The table has a precision pattern of 6 8-M2x4L threaded mounting holes in the rotary table for fixtures or tooling, and an 8 mm (0.315 in) diameter through hole. Countersunk holes in the base allow for easy unobstructed integration into new and existing applications. The diameter of the AR39-AH Miniature Rotary Table is 39 mm (1.535 in.) and range of travel is a full 360 degrees of continuous rotation.

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Motion Contol – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

 

Forestville,CA – Motion Control Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system.

motion control - equipment solutions

This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system. Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

The PVS-5.5 Parallelogram Voice Coil Stage features a high force, frictionless voice coil motor and infinite life flexure system that provides superior responsiveness and accuracy (positioning resolution 75 nm) over conventional leadscrew or belt drives and produces the least amount of electrical noise of any motor currently available. The stage can be mounted in a horizontal or vertical position and for easy integration tapped and clearance holes are provided in the base.

motion control - parallelogram stage

An integral sub-micron linear displacement sensor with high bandwidth and low noise for high responsiveness and precise movements featuring frictionless optical technology completes this positioning system. This cleanroom compatible positioning system is low cost and uses ±12 V to ±24 V @ 1 A. The PVS-5.5 Parallelogram Voice Coil Stage is available with the Equipment Solutions, Inc. SCA814 Servo Controlled Amplifier, and to aid integration into a new or existing application CAD drawings are available on the Equipment Solutions, Inc, Website at http://www.equipsolutions.com/products/linear-stages/pvs-5-5-parallelogram-voice-coil-stage

 

motion control - miniature stage

Download Brochure

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - equipment solutions

 

Motion Control – Miniature Linear Focus Actuator Features <50 Nanometer Positioning Resolution!

Motion Control – Miniature Linear Focus Actuator

Motion Control- Linear Focus Actuator

LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

motion control - equipment solutions

 

Forestville, CA — Motion Control Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke.

Motion Control – Linear Focus Actuator from Equipment Solutions!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator


motion control - equipment solutions

 

 

Forestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.    The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques.  The LFA-1205 Linear Focus Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

  • 12 Millimeter clear aperture
  • 5 millimeters of linear motion
  • <50 nanometer positioning repeatability
  • Small Step Response of <1 millisecond
  • Threaded lens mount 70 x 70 x 50 millimeters, 600 grams

 

motion control - miniature focus actuator

By design, the LFA-1205 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Through manufacturing tolerances only there can be a small amount of pitch and roll motion that is induced during the intended translation.  These small but real error sources are routinely characterized during the manufacturing process  using our AC400 Digital Autocollimator to control product uniformity.

motion control - interface drawing

Click on Links below for:

Motor Force Constant

Position Nonlinearity

Flexure Spring-Rate

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Facebook

Twitter

Equipment Solutions Blog

motion control - miniature components

 

 

Motion Control – LFA-3404 Linear Focus Actuator from Equipment Solutions

Equipment Solutions

Forestville, CA –The motion control LFA-3404 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The motion control LFA-3404 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.   

The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques. By design, the LFA-3404 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Product manufacturing tolerances are closely monitored so that both lateral and angular displacements about the motion axis are as small as possible.

Specifications

Motor Force Constant

Interface Drawings

 

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebool

 
For other Motion Control Components, Applications, and Technology from Equipment Solutions visit: http://MotionControlBlogger.com

Motion Control – Linear Focus Actuator from Equipment Solutions

Sunnyvale, CA, —The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.  Note that this motor is normally configured with an analog position feedback sensor and can be optionally equipped with a digital quadrature feedback element.    The key to this products immense success is its novel tubular architecture.  This arrangement provides a means to send the optical path directly through the middle of the motor.  The moving optic attached to the motors ‘C-mount’ is not cantilevered and so has no torques.  The LFA-1205 Linear Focus Actuator is directly compatible with the SCA814 Servo Controlled Amplifier.

  • 12 Millimeter clear aperture
  • 5 millimeters of linear motion
  • <50 nanometer positioning repeatability
  • Small Step Response of <1 millisecond
  • Threaded lens mount
  • 70 x 70 x 50 millimeters, 600 grams

 

 

By design, the LFA-1205 Linear Focus Actuator rotates approximately 0.1 degrees or 1.7 milliradians for every 1 millimeter of translation.  Through manufacturing tolerances only there can be a small amount of pitch and roll motion that is induced during the intended translation.  These small but real error sources are routinely characterized during the manufacturing process  using our AC400 Digital Autocollimator to control product uniformity.

Click Here for

  • Motor Force Constant
  • Interface Drawing
  • Downloads

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions, 1098 W. Evelyn Ave. Suite #102; Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog
Powered by WordPress and ThemeMag