Category Archives: Tutorial- Construction

Motion Control – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!

Motion Control – Push Type Open Frame Solenoid

motion control open frame solenoid

 

 

motion control - mss logo blk

 

Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.

Motion Control – Solenoid Driver Module from Magnetic Sensor Systems is Energy Stingy!

Motion Control – Solenoids – Driver Module

motion control - solenoid driver module
Motion Control – Solenoids – Van Nuys, CA – Magnetic Sensor Systems (MSS) Has released the SDM840 Solenoid Driver Module as a complement to their Series of Solenoids and those of other manufacturers that includes: Tubular, Open Frame, Low Profile, Hinged Clapper, Latching, and Rotary Solenoids. This compact, quiet 20 kHz pulse width modulated driver module measuring just 1.65 in. x 2.50 in. is designed to consume less energy by first applying the voltage for a pre-determined period of time necessary to activate the solenoid and when the plunger is seated, drop the voltage to a level sufficient to hold the solenoid in the seated position conserving energy and avoiding overheating the solenoid’s coil.

Solenoids - motion control - mss logo blk

This also allows smaller solenoids to be used when a large force at a long stroke is required by applying high voltage to the solenoid providing the necessary force to pull the plunger in, then dropping the voltage down to maintain the plunger in place.

Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!

Motion Control – Push Type Solenoids

motion control - push type solenoid
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.

Solenoids - mss logo blk

The S-70-300H Series of solenoids feature a 3.000 in. diameter x 7.00 in. long housing and a 1.75-12 UN A thread for mounting.

Motion Control – Solenoid Driver Module from Magnetic Sensor Systems is Energy Stingy!

Motion Control – Solenoids – Driver Module

motion control - solenoid driver module
Motion Control – Solenoids – Van Nuys, CA – Magnetic Sensor Systems (MSS) Has released the SDM840 Solenoid Driver Module as a complement to their Series of Solenoids and those of other manufacturers that includes: Tubular, Open Frame, Low Profile, Hinged Clapper, Latching, and Rotary Solenoids. This compact, quiet 20 kHz pulse width modulated driver module measuring just 1.65 in. x 2.50 in. is designed to consume less energy by first applying the voltage for a pre-determined period of time necessary to activate the solenoid and when the plunger is seated, drop the voltage to a level sufficient to hold the solenoid in the seated position conserving energy and avoiding overheating the solenoid’s coil.

Solenoids - motion control - mss logo blk

This also allows smaller solenoids to be used when a large force at a long stroke is required by applying high voltage to the solenoid providing the necessary force to pull the plunger in, then dropping the voltage down to maintain the plunger in place.

Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!

Motion Control – Push Type Solenoids

motion control - push type solenoid
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.

Solenoids - mss logo blk

The S-70-300H Series of solenoids feature a 3.000 in. diameter x 7.00 in. long housing and a 1.75-12 UN A thread for mounting.

Motion Control – Tutorial – Solenoid Construction

Motion Control – Tutorial – Solenoid Construction

motion control solenoid tutorial

 

 

motion control - mss logo blk


Solenoid Construction

A Solenoid is a long wire, wound with a helical pattern, usually surrounded by a steel frame, having a steel core inside the winding.

When carrying a current “i “, the Solenoid becomes an electro-mechanical device, in which electrical energy is converted into mechanical work.

Motion Control – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!

Motion Control – Open Frame Solenoids

motion control - open frame solenoids
Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.

motion control - mss logo blk

The S-18-100 Series solenoids are 1.000 in. wide x 0.84 in. high x 1.74 long and have a 1.00 stroke. The noncaptive plunger or actuator is 0.312 in. in diameter with a clevis end for load attachment.

Motion Control – Compact Rotary Solenoids Available in OEM Quantities, Can Be Performance Matched To An Application!

Motion Control – Rotary Solenoids

motion control - rotary solenoid
Motion Control – Van Nuys, CA –The R-09-150 CCWM Series of Counter Clockwise, Forward Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application. These compact 38.1 mm (1.50 in.) diameter solenoids are just 22.098 (22.1) mm (0.87 in.) long and have two M4X0.7 threaded studs (8-32 studs optional) 7.366 (7.4) mm (0.29 in.) long on a 22.225 (22.2) mm (0.875 in.) bolt circle.  The shaft has 40 degrees of counter clockwise rotation, extending (13.0) mm (0.51 in.).   The shaft end is serrated for a better grip of the attached load. 

motion control - mss logo blk

The R-09-150 CCWM Series of Rotary Solenoids can be specified with a choice of AWG winding of 21 to 37 gauge.    Specifying a different AWG for the windings allows the user to control the performance of a solenoid with respect to duty cycle, current supplied, and torque by controlling the ampere turns.

Motion Control – Select From the S-20-100X Series of 1 Inch Dia. Pull Type Solenoids to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!

Motion Control – Tubular Solenoids

motion control - solenoids
Motion Control – Van Nuys, CA – Magnetic Sensor Systems (MSS) has released their S-20-100X model of Pull Type Tubular Solenoids. Their S-20-100X series of solenoids features 18 different solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
motion control - mss logo blk

 

MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” insulation for better protection of the solenoid during longer duty cycles.

Motion Control – Select from a Series of Low-Profile Push/Pull Type Solenoids to Meet the Specific Voltage, Duty Cycle, and Force Requirements of Your Application!

Motion Control – Compact Push/Pull Solenoids

motion control - mss push pull solenoid
Motion Control – Van Nuys, CA –Magnetic Sensor Systems (MSS) has released 18 low-profile Push/Pull Clapper Solenoids with the ampere turns (windings) adjusted to meet the specific force and duty cycle requirements of an application. The S-66-100 Series of Low-Profile Clapper Push/Pull Type Solenoids from MSS are just 1.00 in. in diameter and 0.66 in. deep.

motion control - mss logo blk

 

These compact solenoids have a 0.40 in. stroke and can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, plotters, clutches, switches, mixing, valve control, vending machines, games, fire suppression systems, cabinet locks, door controls, and sorting equipment.

Motion Control – High Performance “Pick & Hold” Solenoid Driver Modules from OES!

Motion Control – Pick & Hold Solenoids
motion control solenoid modules

motion control - OES

 

 

 

Van Nuys, CA – — Motion Control – A compact, PWM, high performance Pick-and-Hold Solenoid Driver Module, the PH-ET series from Optimal Engineering Systems, Inc. (OES) is designed to energize one or two solenoids independently. It avoids overheating of the energized solenoid coils even for indefinite hold times.

Powered by WordPress and ThemeMag