Category Archives: Stages – X

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control – Sub-micron Positioning Stage

Motion Control Miniature Stage
Forestville, CA, —motion control  — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.


motion control - miniature componentsThe compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, motion control voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation, motion control, and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - miniature components

 

Motion Control – Servo Controller for Non-commutated Devices, e.g. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices!

motion control - Voice Coil Motor Controller

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25


motion control - miniature components

 

 

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw and Pitch Stages

motion control - yaw pitch stage


Van Nuys, CA – Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

motion control - stage

The YP100-45 Series of Yaw-and-Pitch Stages were developed through the integration of a rotary stage (yaw axis) and a goniometer (pitch axis) having a travel range of +/- 45 degrees.

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!

motion control XZR Stage
motion control - stage

 

 

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

Motion Control – Voice -Coil Stage
motion control - electric cylinder

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor.  Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force.  The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing.  The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections.

Motion Control – Linear Motion Roll-Slide Mini from LM76

Motion Control – Miniature Linear Slide

Linear Motion Roller Slide Assembly

Automation Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

Motion Control – Miniature Autocollimator

motion control - miniature Autocollimator

Forestville, CA,   Motion Control —  The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

motion control - miniature components

 

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Parallelogram Voice Coil Positioning Stage Is a Complete Positioning System!

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

 

 

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – Very Stable, High Precision, High Load, Low Cost Motorized Vertical Lift Stage from OES!

Motion Control – Vertical Lift Stage
motion control - vertical lift stage

motion control -oes

 

 

 

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw Pitch Stages

motion control - yaw pitch stages

motion control - OES Components

 

 

 

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Low Cost, High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage
motion control - linear motion stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – The Engineering Edge – FDA/USDA/3A-Dairy Compliant Linear Motion Bearings!

Motion Control – USDA/FDA/3A-Dairy Compliant Linear Motion Components

motion control - metric linear bearings
LM76 offers Metric FDA/USDA/3A-Dairy compliant self-lubricating linear bearings for: Food Processing, Packaging, Bio/Pharmaceutical, and Medical Systems!

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

Motion Control – High Precision Linear Stages


motion control - OES Components

 

 

Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.).

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA – Motion Control – The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - miniature components

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Motion Control – Open Aperture Voice Coil Stage Features 1 Micron Positioning Resolution!

Motion Control – Open Aperture Voice Coil Stage


motion control - moticont

 

 

Van Nuys, CA – Motion Control Components – The compact HCDS-025-038-02-B1-01 Voice Coil Stage from Moticont has a foot print of just 2.000 in. (54.0 mm) wide by 5.000 in (127.0 mm) long and features a positioning resolution of 1 micron and a 0.125 in. (3.175 mm) open aperture. This precision cross roller stage has a 0.97 in. (24.6 mm) range of motion with 1.0 lb. (4.4 N) of continuous force and 3.2 lb (14.2 N) peak force. The zero cogging, clean, quiet, efficient, low inertia, high acceleration, high speed voice coil driven stage has a built-in home switch for accurate initialization.

Motion Control – Customizable Lintech 100 Series Screw Driven Linear Stages That Ship In 1 Week Are Available from Electromate!

Motion Control – Linear Stages

motion control - linear stagesMotion Control Stages  – Lintech’s 100 Series Positioning Tables set the standard for high performance and value.

motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control  — Acme Screw or Ball Screw Driven Linear Motion: The Lintech motion control 100 series linear positioning slides are designed to maximize performance while minimizing physical size and cost.

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

motion control- X,Z, goniometer stage
Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

motion control -oes

 

 

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification.

Motion Control – Miniature PVS 30.5 Parallelogram Voice Coil Stage from Equipment Solutions!

Motion Control – Miniature Parallelogram Voice Coil Stage!

motion control - miniature stages


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom PVS-30.5 Parallelogram Voice Coil Stage Features: Flexture guidance system, 30 millimeter clear aperture, 4 millimeters of linear motion, 45 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA-814 Servo Controlled Amplifier compatibility, 38mm x 46mm x 85mm, 280 grams.

Powered by WordPress and ThemeMag