Vaughan, Ontario, Canada — Motion Control Components — JVL presents a new innovative closed-loop stepper motor technology for its NEMA 23 & 34 integrated stepper motor range from 0,1 to 12 Nm. JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.
Greenville, DE – Motion Control Components – Servo2Go is pleased to offerf eight motion control integrated drive+motors from Applied Motion Products to our line of Ethernet and EtherNet/IP motion control products
The STM23 models fuse a high performance motion controller with 100 MBit Ethernet communications to a high torque NEMA23 step motor. Connecting to an Allen-Bradley ControlLogix, CompactLogix or MicroLogix PLC? EtherNet/IP is also available
 |
The STM23Q-2Ex provides 125 ounce inches of torque, while the longer STM23Q-3Ex produces 210 ounce inches. Both models are available with an optional 4000 count/rev optical encoder, safely housed inside, that can detect and prevent motor stalls using Applied Motion’s proprietary stall prevention algorithm. Our auto tuned digital current control provides smooth, quiet motion, while an advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization, rapid acceleration, and fast settling times
Software applications can communicate with the STM23 in real time, using the SCL and Q languages over standard 100 megabit Ethernet cabling, addressing and protocols. Ethernet can transmit data at 100 times the speed of CANopen and more than 1000 times faster than RS-232 and RS-485. The number and types of devices that can share a network are practically unlimited.
Even if you are just programming a Q drive for standalone operation, the Ethernet option can be more convenient than chasing down a USB-serial converter and trying to remember which COM port it uses. Just plug the drive into your office network, install our free, easy to use software, and you’re ready for programming and configuration.
50 piece pricing begins at $371 US/ea. Delivery is 1-2 weeks.
For more information on the Applied Motion Products STM23 Integrated Step Motor with EtherNet from Servo2Go, click on the link below:
http://servo2go.com/product.php?ID=102267&cat
For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com
| 100% Automatic Setup | No need to adjust any parameters. JVL closed-loop stepper motors always work fast and efficient to adapt motor to application. Extremely high update frequency: 36 MHz (where other suppliers have down to only 1 Hz update time). Calculations are made in FPGA and not in slow microprocessors. |
| Energy Saving | Like servo motors QuickStep always runs at lowest possible current. This reduces the need for cooling and results in a more “green” solution. |
| Stall-Free Operation And No Losing Of Steps | By always monitoring the actual rotor position, the control algorithm ensures that the motor does not lose any steps and it cannot stall. If the rotor is blocked mechanically it just continues right away when the obstruction is removed. |
| Torque Control Mode | The torque can be adjusted “on the fly” by the user or by the motor’s embedded PLC program. Applications that were previously impossible for a stepper motor can now be achieved. |
| Higher Acceleration & Speed | Stall-free operation means you do not need to worry about setting the motor to a very high acceleration ramp. The motor simply moves the load with the highest possible acceleration at any given time. The result is a much faster machine with more cycles per day. |
| Factory Loaded Linearization | The motor and encoder are calibrated during factory production in order to reach a very high mechanical precision. |
| Older Motors Are Supported | The Closed-loop control mode is backward compatible with older motors equipped with H2-type encoders. By updating the firmware, the user’s application can benefit from the stall-free operation with very high accelerations and lower power consumption. |
| Full Torque Available | The motor is capable of using the full torque according to the torque-velocity curve and therefore the need to have a safety overhead when dimensioning the machine is much less. Smaller motor = lower costs. |
