Motion Control – Low Cost Linear Optical Encoder Module and Linear Scale Feature 1.25 Micron Resolution!

September 11, 2023 Editor-Publisher

Motion Control – Linear Optical Encoder Modules!

Van Nuys, CA – Motion Control Components – Moticont has released their OEM-00125U-01 Linear Optical Encoder Module and LS-00125U-01 Linear Scale. The compact linear encoder module measures just 51.5 mm (2.027 in.) long by 5.99 mm (0.236 in.) wide by 0.8 mm (0.073 in.) high. This high, 1.25 micron resolution, low power encoder module features TTL Quadrature Outputs and requires only a single +3.3 or +5 VDC supply.

The LS-00125U-01 Linear Scale supplied is only 6 mm (0.24 in.) wide by 0.3 (0.01 in.) high and would be attached to a flat surface using PSA adhesive. The standard scale length is 76.2 mm (3.00 in.) long. The linear scale is available with lengths up to 610.0 mm (24.00 in.). The quadrature signals are output differentially. The module also features a TTL level HOME output.

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

August 11, 2023 Editor-Publisher

Motion Control – Open Aperture Voice Coil Stages!

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

July 27, 2023 Editor-Publisher

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder. Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability. The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification.

Motion Control – Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution!

June 22, 2023 Editor-Publisher

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Van Nuys, CA – Motion Control Components – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.).

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

June 12, 2023 Editor-Publisher

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages. The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation. These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

OES – All New! High Precision, Three-axis Gimbal Mounts with Four Motor Options Offer Greater Flexibility and Stability!

June 08, 2023 Editor-Publisher

OES – NEW! Three-axis Gimbal Mounts!

Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below the center line of rotation allowing for the positioning of: Cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications on their respective centerlines.

Motion Control – High Force Linear Servo Motor is just 2.25 Inches Long at Mid-Stroke!

May 25, 2023 Editor-Publisher

Motion Control – High Force Linear Servo Motor!

Van Nuys, CA – Motion Control Components – A high force Linear DC Servo Motor from Moticont has been added to their expanding line of voice coil or moving coil motors. The LVCM-095-038-01 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed positioning loop. Clean non-commutated, zero cogging, zero backlash voice coil motors (also referred to as linear actuators) are, efficient, brushless high speed linear servo motors.

This LVCM-095-038-01 Linear Servo is 3.75 in. (95.3 mm) in diameter and has a continuous force of 23.1 lb. (102.7 N) and a peak force of 73.1 lb. (324.4 N) at a 10% duty cycle.

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

May 18, 2023 Editor-Publisher

Motion Control – Open Aperture XY Alignment Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes. These new low profile 87 mm (3.425 in.) high XY stages, have a 188 mm x 188 mm (7.401 in. x 7.401 in.) open aperture. Easy integration of tooling and fixtures is facilitated through a precision series of threaded mounting holes.

Motion Control – High Force Linear Servo Motor is just 2.25 Inches Long at Mid-Stroke!

May 02, 2023 Editor-Publisher

Motion Control – High Force Linear Servo Motor!

Van Nuys, CA – Motion Control Components – A high force Linear DC Servo Motor from Moticont has been added to their expanding line of voice coil or moving coil motors. The LVCM-095-038-01 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed positioning loop. Clean non-commutated, zero cogging, zero backlash voice coil motors (also referred to as linear actuators) are, efficient, brushless high speed linear servo motors.

This LVCM-095-038-01 Linear Servo is 3.75 in. (95.3 mm) in diameter and has a continuous force of 23.1 lb. (102.7 N) and a peak force of 73.1 lb. (324.4 N) at a 10% duty cycle.

Motion Control – High Precision 300 MM Motorized Vertical Lift Stage from OES Features: Stability, High Load Capability, and Low Cost!

March 09, 2023 Editor-Publisher

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control – A vertical lift of 300 mm (11.811 in.), high stability, and low cost are just some of the features of the AT20-300 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES). This high load, 50 kg (110.2 lbs), vertical lift stage can be easily integrated into almost any application. The large 400 mm x 200 mm (15.748 in. x 7.874 in.) stage has a pattern of threaded mounting holes. The rigid box construction of the moving component of the elevator stage travels on six slide rails assuring smooth vertical travel and parallelism of the table and mounting surface at all times, and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy.

Motion Control – ZrO2 Zirconia Ceramic Radial Ball Bearings For High Loads available from LM76 are FDA/USDA/3A-Dairy Compliant!

February 10, 2023 Editor-Publisher

Motion Control – Zirconia Ceramic Radial Bearings

E. Longmeadow, MA — Motion Control – LM76 has announced the release of their new line of Radial Ball Bearings featuring ZrO2 (Zirconia) Ceramic balls. To Complement LM76’s broad range of Linear Bearings that are FDA/UDSA/3A Dairy compliant, as well as linear bearings for extreme environments; they have added Deep Groove bearings which accommodate radial and axial loads, Angular Contact bearings for simultaneously handling radial and axial loads, Spherical Bearings which are self aligning, and Thrust Bearings for high axial loads. Each of the four types of metric bearings are available in a wide range sizes.

Motion Control – Direct Drive Linear Motors with Integrated Encoders Offer High Resolution, Speed, No Backlash, and Zero Cogging!

January 04, 2023 Editor-Publisher

Motion Control – Direct Drive Linear Motors

Van Nuys, CA – Motion Control – The new, SDLM-025-070-01-01 direct drive linear motor from Moticont, also known as an electric cylinder, features a built-in encoder, has zero backlash, zero cogging, and provides users with high acceleration, high speed, high resolution, and long life. This direct drive linear motor features 1.25 µm (0.000049 in.) in of resolution.

Motion Control – Precision Manual XYZ Stage from OES!

December 21, 2022 Editor-Publisher

Motion Control – Precision Manual XYZ!

Van Nuys, CA —– Motion Control – This manual crossed roller XYZ-axis positioning stage is made of aluminum alloy with an black anodized coating. The table size is 25 x 25 mm has a body weight of 0.16 Kgf. The maximum load of this super thin table is 1 Kgf. The movement accuracy is Straightness 5µm, Vertical yawing 30″ and Parallel yawing 25″.

Motion Control – High Precision XYR Alignment Stage Has Better Than +/- 3 Micron Accuracy!

December 10, 2022 Editor-Publisher

Motion Control – Alignment Stage!

Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications. The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- 5 degrees of rotation (theta). It moves in XY-plane and rotates around the center of the XY-plane.

The XYR-300-400 Alignment Stage feature linear resolutions of the X and Y axis of 1 micron resolution with a 10 micro-steps per step motor driver and static parallelism of less than 0.05 mm.

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

November 19, 2022 Editor-Publisher

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle).

Motion Control – Low Cost, High Precision Linear Voice Coil Stages from Moticont!

August 17, 2022 Editor-Publisher

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control – Metric Dimensioned Linear Voice Coil Motors are Now Available from Moticont!

February 07, 2022 Editor-Publisher

Motion Control – Metric Dimensioned Linear Voice Coil Motors!

Van Nuys, CA — Motion Control – Moticont has added Metric dimensioned motors to their popular LVCM Series of Linear Voice Coil Actuators! An example is the miniature LVCM-022-013-01M Linear Voice Coil Actuator. At 22.2 mm (0.875 in.) in diameter and at mid-stroke just 20.7 mm (0.81 in.) long, this new metric miniature voice coil actuator has a continuous force of 4.0 N (14.5 oz) and a peak force of 12.7 N (45.7 oz), and features a 6.4 mm (0.25 in.) stroke.

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

September 23, 2021 Editor-Publisher

Motion Control – Electric Cylinder Has Zero Cogging

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – 1.25 Inch Stroke Linear Voice Coil Motor Tolerates Tilting and Misalignment is available from Moticont!

August 24, 2021 Editor-Publisher

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Van Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control -What To Consider When Specifying A Linear Slide

July 23, 2021 Editor-Publisher

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

Category Archives: XYZ Stage

Motion Control – Linear Optical Encoder Modules!

Motion Control – Open Aperture Voice Coil Stages!

Motion Control – 600 MM Vertical Lift Stages

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Motion Control – Four Axes Positioning Stages

OES – NEW! Three-axis Gimbal Mounts!

Motion Control – High Force Linear Servo Motor!

Motion Control – Open Aperture XY Alignment Stages

Motion Control – High Force Linear Servo Motor!

Motion Control – Vertical Lift Stage

Motion Control – Zirconia Ceramic Radial Bearings

Motion Control – Direct Drive Linear Motors

Motion Control – Precision Manual XYZ!

Motion Control – Alignment Stage!

Motion Control – Voice -Coil Stage

Motion Control – Voice -Coil Stage

Motion Control – Metric Dimensioned Linear Voice Coil Motors!

Motion Control – Electric Cylinder Has Zero Cogging

Motion Control – Linear Voice Coil Motor Tolerates Tilting

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

Categories

Recent Posts