Category Archives: Controller – Four Quadrant Servo Drive

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

Motion Control –  Six-axis Robot!

motion control - robot


motion control - electromate

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Motion Control – Introducing the World’s Most Compact 1500 Watt Integrated Servo Motor!

Motion Control –  1500 Watt Integrated Servo Motor!

motion control - integrated servo motor

JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors.

 


motion control - electromateVaughan, Ontario, Canada — Motion Control Products — JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.

New Compact Motor

The MAC1500 motor sets completely new standards for the performance and size of servo controls. With a length of only 182mm for a 1500W motor with a torque of 4.78/14.3 Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods. So what about vibrations and temperature? As with the other integrated servo motors in the range (50-4500W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

Motion Control – New IDX Compact Servo Motor with Integrated Positioning Controller from Maxon is available from Electromate!

Motion Control – Integrated Servo Motor

 

This compact brushless EC-i motor combined with an EPOS4 positioning controller delivers a highly dynamic, powerful drive package with field-oriented control (FOC), high efficiency, and maintenance-free components in a high-quality industrial housing.
motion control - electromate
motion control - integrated Servo Motor


Vaughan, Ontario, Canada — Motion Control Components — Maxon’s new IDX compact integrated servo gearmotor + drive combines a powerful, brushless EC-i motor and an EPOS4 positioning controller, which can be complemented with a maxon planetary gearhead when required. This integrated motor stands out for its high torque density, high efficiency, maintenance-free components, and a high-quality industrial housing providing IP65 protection. The IDX also features configurable digital and analog inputs and outputs, and intuitive software enabling easy commissioning and integration into master systems.

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

motion control - electromate


motion control - electromateTORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

Low Cost 4 Axis Servo Controller for High Speed, Low Inductance Motors Available from Moticont!

Motion Control Components - Moticont 4 Axis servo Controller

MotiCont-Logo

 

 

Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with latest FPGA technology for required extensive calculations.

This compact, low cost, plug-and-play multi-axis servo motion controller is supplied with power supplies, servo motor drivers, USB cable and free control panel software. The user friendly software allows for quick set-up and operation. It can be controlled using a Micro-Controller, PLC and PC using a popular programming language such as C/C++, Visual Basic, LabVIEWTM, or MatlabTM.

This controller series can support up to four axis of motion. Modes of motion include coordinated motion, point-to-point positioning, and jogging.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Automation – CANopen Motor Controllers for Electric Mobility and Vehicular Applications!

Automation - Motion Control CANopen Motor Controllers from Servo2Go

Servo2Go-Logo

Greenville, DE — -Automation – Motion Control – The DVC series motor controllers from Advanced Motion Controls are digital four-quadrant servo drives purpose-designed and built to operate today’s modern mobile electric vehicular platforms. Providing high power from battery supplies, the DVC series features a compact design, IP65 construction and multiple operating modes for controlling either permanent magnet brushed or brushless motors. Whether for traction / propulsion, steering, lifting or any other electrically driven actuation, the DVC series is the newest member in a long line of successful motor controlling solutions from Advanced Motion Controls.

The ability to maximize battery life and extend vehicle operations, essentially running ‘lean and mean’, is the key to keeping a vehicle operating at peak performance. With unmatched power density, high efficiency, low weight, cool thermal operation and regen all built in, selecting the DVC series is the obvious choice.

The DVC Series motor controllers operate in torque, velocity, or position mode and provide high power from battery supplies with multiple operating modes for either 3Φ (servo, closed loop vector, or closed loop stepper) or 1Φ motors. The DVC Series communicate over CANopen and are configured with AMC’s DriveWare® 7 configuration software.

Specific applications include: mobile robots, AGV’s, UGV’s, material handling and transport vehicles in both industrial and military environments.

More information on the DVC series motor controllers available from Servo2Go.com can be viewed at:https://www.servo2go.com/search.php?search=DVC2&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link