Category Archives: Drives – Extreme Environment

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

motion control - electromate


motion control - electromateTORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – 510 Series DC and Brushless Servo Motor Drivers from MotiCont!

Motion Control – Servo Motor Drivers

motion control - servo motor driversVan Nuys, CA – Motion Control – This series of drivers is a high performance, cost effective servo motor driver to implement intelligent motion control. The driver incorporates an advanced architecture and surface mount technology to achieve an exceptional power density. This series is designed to drive voice coil, brush-type and brushless DC motors at a high switching frequency. They receive step and direction signals or analog signal from motion controller.
motion control - moticont

Motion Control – Maxon drives are heading to the Red Planet with NASA’s Perseverance Rover!

Motion Control – Application – Maxon drives heading to the Red Planet!

In July, NASA will be sending its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover will also carry a helicopter that will perform the first flights on the Red Planet. maxon’s precision DC and BLDC motors will be used for numerous mission-critical tasks.

motion control - maxon motors

 


motion control - maxon motorTaunton, MA — Motion Control Products & Application – maxon drive systems are very familiar with Mars. Our drives have been used in virtually every successful robotic mission over the last three decades. There are now more than 100 of them on the Red Planet and there are likely to be more soon. The launch window for NASA’s next mission opens on July 22nd. An Atlas V rocket will launch the new Perseverance rover on its way to Mars, where it will be searching for signs of previous life on the planet. Its most important job is to take multiple soil samples, seal them in containers and deposit them on the surface of Mars so that a future mission can return them to Earth. Several maxon motors will be used to handle the samples inside the rover. For example, maxon DC motors are installed in the robotic arm, which moves the samples from station to station. Maxon motors will also be used for sealing and depositing the sample containers.

NASA’s Jet Propulsion Laboratory (JPL), is carrying out the mission, and have asked maxon to produce 10 drives for the rover. As with almost all previous Mars missions, these drives are based on standard products from maxon’s catalog with modifications. For the first time, NASA is using brushless DC motors, including: nine EC 32 flat and one EC 20 flat in combination with a GP 22 UP planetary gearhead. Working closely with JPL specialists, maxon engineers developed the drives over several years and tested them thoroughly to achieve the highest standards of quality. “We’ve learned a lot from this exciting project,” says Robin Phillips, head of the maxon SpaceLab. “We now have very broad expertise in space applications and have established quality assurance processes that meet the expectations of the industry. Customers from other industries such as the medical sector, where requirements are often similar, can also benefit from this know-how.”  Space missions place the highest demands on drive systems. This includes vibrations during the rocket launch, vacuum during the journey, impacts on landing, and the harsh conditions on the surface of Mars, where temperatures fluctuate between -125 and +20 degrees Celsius and dust penetrates everywhere

Maxon DC motors control the Mars helicopter.

motion control - maxon mars motor

The Perseverance rover is expected to land on Mars on February 18, 2021 – but it won’t be alone. A drone helicopter called Ingenuity will be attached to the underside of the rover. It weighs 1.8 kilograms, is solar powered and will perform several short flights, as well as take aerial images. The main goal of this experiment is to test the concept for further drones of this kind. maxon has six brushed DCX motors with a diameter of 10 millimeters controlling the tilt of the rotor blades and the direction of flight. The drives are very light, dynamic and highly energy-efficient. These properties are crucial, because every gram counts on the Mars helicopter. Flying on Mars is not easy. The atmosphere is extremely thin, roughly comparable to the conditions on Earth at an altitude of 30 kilometers. The drone helicopter has flown in a simulated test environment in the JPL laboratory. Whether it will lift off on Mars remains to be seen. First, other obstacles, such as the rocket launch, must be successful. “We hope that everything goes well and that we’ll soon see our drives in action on Mars,” says maxon CEO Eugen Elmiger. “We’re all keeping our fingers crossed.”

motion control -maxon miniature motors

For additional information, please contact us at info.us@maxongroup.com or 508-677-0520.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com/maxon/view/content/index

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2021/2022 Maxon Catalog

motion control - maxon logo

Motion Control – Harsh Environment Servo Drives Available from Electromate!

Motion Control - Electromate offers Food Grade HMI Display from Exor

Motion Control - Electromate-Logo

 

 

Vaughan, Ontario, Canada –Motion Control Components – Advanced Motion Controls’ Extended Environment Amplifiers are designed to operate under harsh thermal and mechanical extremes. An expanded thermal operating range allows these drives to function in both hot and cold ambient environments, and enhanced protection against shock and vibration provides additional system ruggedness. Extended Environment drives also afford benefits for applications in more docile conditions. The superior thermal capabilities reduce or eliminate the need for cooling systems such as external heat sinks and fans, enabling system designs to be more compact and to improve overall reliability.

Electromate offers Food Grade HMI Display from Exor

 

 

AMC’s Extended Environment Motion Control Servo Drives feature:

  • Shutdown Heat Sink Temperature
    • AZX-series: +105°C (221°F) — Hotter than boiling water!
    • DZX-series: +85°C (185°F)
  • Ambient Operating Temperatures
    • AZX-series: from -40° to +85°C
    • DZX-series: from -40° to +75°C
  • Complete Thermal Rise cycling in about 2 minutes
  • Shock up to 15g’s at 11 msec, ½ sine
  • Vibration up to 30grms on all 3 axes
  • Light weight
    • AZX-series: 95 grams
    • DZX-series: 105 grams
  • ~97% {max.} efficiency

Designed to assist system compliance toward:

  • MIL-STD-810F – temperature, thermal shock, humidity, altitude, shock & vibration
  • MIL-STD-1275D – characterization of 28Vdc systems
  • MIL-STD-461E – control of electromagnetic interference
  • MIL-STD-704F – aircraft power characteristics
  • MIL-HDBK-217 – reliability predictions

Click on the following link for more information on the Extended Environment Servo Drives from Advanced Motion Controls.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link