Category Archives: Linear Guide

The Engineering Edge – What’s the Difference?

Motion Control – Linear Bearings Compared

motion control - ceramic linear bearings
E. Longmeadow, MA – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - lm76

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear stage

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

The Engineering Edge – Custom FDA Compliant Linear Bearings!

Motion Control – Custom FDA/USDA Compliant Linear Bearings
motion control - engineering edge

“If we don’t have the FDA Compliant linear bearing for your application, we’ll design and make one.”  Call me at 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com!

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control- ETX Linear Bearing/Pillow Blocks

Motion Control Bearing/Pillow Block for Radioactive Environments

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures as there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free.

motion control - lm76

Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

To see the “Motion Control Application – ETX Pillow/Block Bearings for Radioactive Environments” CLICK HERE

Designed with a slight interference fit between bearing ID and shaft, contaminates are scraped from the shaft’s surface. The low frictional characteristics of ETX have little impact on drive force. They are now available in Inch and Metric sizes.

Motion Control – The Engineering Edge – Jet Rail Linear Roller Blocks

Motion Control – the Engineering Edge – Jet Rail

Go to http://lm76blogger.com/linear_motion/1407 for an Application of Jet Rail Linear Roll Blocks

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

For other Motion Control Components, Applications, and Technology from LM76 go to: http://MotionControlWeb.com

LM76
Visit our Website
Order Our Catalog

 

 

 

See this and other Motion Control Components from Equipment Solutions are also featured on:

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://FluidShop.com

http://FluidShop.net

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

motion control FDA compliant components

 

LM76

E. Longmeadow, MA — Motion Control Components – Linear Motion – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. In addition to needing FDA compliant materials that will be used in the actual masks, gowns, and ventilators, the tooling used to manufacture these products may also need to meet FDA compliance standards. Depending on the product being manufactured, the tooling may need to be: Washed down using caustic chemicals, cleaned with high pressure steam, or sterilized with high Intensity Ultra Violet light or radiation.

Ordering custom FDA compliant linear motion slides and XYZ stages can result in long delays. As an alternative, many companies have linear motion slides in stock for immediate delivery, however, they may not be FDA compliant. In many cases it is the bearings that are not in compliance. LM76 manufactures several types of FDA compliant linear bearings and pillow blocks that are drop-in-replacements for existing bearings. FDA compliant bearings and pillow blocks from LM76 will not trap contaminating debris and can be thoroughly sanitized following Sanitation StandardOperating Procedures (SSOPs). SSOPs are detailed schedules and procedures specifying what to clean, how to clean, how often to clean, and the record keeping used for monitoring.

A helpful component selection guide from LM76, “Linear Bearings, 6 Simple Steps – FDA Compliance, Wash Down Compliance,” details the linear motion components available from LM76 that are FDA/UDSA/3A-Dairy compliant. Included are: Foodstream electroless nickel plated pillow blocks, PTFE lined stainless steel bearings, ceramic coated linear bearings, self-aligning corrosion resistant linear ball bearings, and Thomson® Super SmartTM corrosion resistant, self-aligning, high load linear ball bearings, and solid ETX pillow block/bearings. Shafting to compliment the type of bearing selected includes: Class L Stainless 303/304/316, 440C case hardened stainless, Rc 60 case hardened steel with an Armoloy coating and also Rc78 Class L for enhanced hardness and wear resistance. End blocks and shaft supports that have a ceramic or electroless nickel coating are also available, as well as new ETX Scraper Seals that prevents intrusion of contaminates adding another line of defense.

LM76 also designs and custom builds linear slides from Stainless Steel and other FDA wash down compliant materials.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com


See this and other Motion Control Components from LM76 featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LM76Blogger.com


LM76
Visit our Website
Order Our Catalog

 

 

Motion Control – Complete Guided Motion Solutions from A to X-Y-Z … … Available from Electromate!

Motion Control – Linear Guides

 


motion control - electromate logoVaughan, Ontario, Canada — Motion Control Components — Bishop-Wisecarver invented and patented DualVee Motion Technology® more than 40 years ago to provide a solution for harsh environment applications where existing technologies were ineffective. DualVee® also proved excellent for long length, smooth motion and low noise requirements.

Today, Bishop-Wisecarver remains the recognized expert and the most trusted name in guide wheel technology, with the widest range of guide wheel based linear motion products in the world

Benefits of Guide Wheel Technology include:

  • Harsh Environments
  • Long Lengths
  • Low Noise
  • Smooth, Low Friction Motion
  • Speeds up to 5.5 meters/sec
  • Acceleration up to 5 g’s
  • High Temperature, Low Temperature
  • Clean Room Options
  • Ease of Assembly, Low Cost Installation
  • Low Maintenance

motion control - products

For more information on the “Best Place to Work”CLICK HERE!

CLICK HERE to view the Bishop-Wisecarver Catalog

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate

How Would You Position Components Of An Experimental Reactor Vessel Weighing 33 Tons?

Motion Control – Application

Easily …   … Using Custom made LM76 Jet Rail Bearings and Shafting!

When a privately funded research company was ready to move from their original Proof of Concept to a sustainable fusion reactor to produce clean sustainable energy, they realized that extremely heavy components would need to be assembled and disassembled and reassembled again for design modifications and maintenance. The completed assembly would be the length of two buses and easy alignment of the individual components would be critical.

 

The main reactor, the fusion containment chamber that is capable of containing a plasma medium of 10 to 15 million degrees is made of non-magnetic stainless steel as are many of the components. The Plasma Medium could be described as a football shaped blob about 1 meter in diameter by 2 meters long. The plasma medium is injected from each end of the reactor assembly by Plasma Guns.

In addition to supporting the weight of the components, the bearings selected to move these massive loads during the construction and testing of the fusion reactor would have to be non-magnetic. Working with engineers, LM76 developed a custom 3 inch Jet Rail Bearing designed to carry both the weight of the fusion reactor and the high energy particle generators. In addition LM76 supplied precision ground, 3 inch 303 stainless steel (non-magnetic) shafting.

The custom manufactured Jet Rail Roller Blocks and 303 stainless steel shafting simplified the assembly/disassembly of the fusion containment chamber and components while ensuring critical alignment throughout travel.

This breakthrough fusion reactor is still in the experimental stage. A commercially viable reactor would need to contain 100 million degrees. Why is the project so important? Because in addition to producing sustainable energy, its only by-product is, environmentally safe, “helium ash.”.

 

 

For additional information about these custom Jet Rail Linear Bearings and Shafting from LM76 go to: http://www.lm76.com/jet_rail.htm

 

 

 

 

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

 

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Precision “Zero Clearance,” Smooth Sliding Partial Extension Rails Available from LM76!

Motion Control – Extension Rail Systems

motion control - extension rails

LM76

E. Longmeadow, MA Motion — Control Components – Linear Motion – As the exclusive distributor of SAIBO Linear Motion Systems in the US, LM76 is offering the SAIBO TPE28 and TPE43 series of Partial Extension Rails. These compact, precision, smooth sliding rails are assembled with a zero clearance. The TPE28 and TPE43 Partial Extension Rail series are created using a “C” shaped external rail and an internal slider. Two rows of steel ball bearings (one on the top and bottom of the slider) travel in ball cages on hardened “V” shaped ways with four points of contact. These Partial Extension Rails are Ideally suited for applications requiring smooth motion such as: Material handling, rail systems in trains, aircraft, ships, trucks, and autonomous vehicles, wafer handling, delicate parts transfer, assembly, testing, laser machining and drilling.

The TPE28 series of Partial Extension Rails consists of 14 rails with stroke lengths from 72 mm (2.834 in) to 601 mm (23.661 in.) and supporting loads from 1224 N (275 lbs) to 15,166 N (3409 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. The TPE43 series of Partial Extension Rails consists of 23 rails with stroke lengths from 123 mm (4.842 in) to 1013 mm (39.881 in.) and supporting loads from 3192 N (717 lbs) to 48460 N (10,894 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. Stroke lengths (extension) are typically 51% of the length of the assembly.

These industry standard Partial Extension Rails are ideal for use in new and existing applications. Both the TPE28 and TPE43 Partial Extension Rails have a maximum working speed of 0.8 m/sec. (xxx in/sec )and have an operating temperature range of -20OC (-20OF) to 120OC (-20OF). For complete information on the assembly, loads, and stroke lengths for each series and additional details consult the factory.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

And say, “I saw it on MotionShop.com, “The Motion Control Home Page.”


See this and other Motion Control Components from LM76 featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

 

 

 

LM76
Visit our Website
Order Our Catalog

Motion Control – The Engineering Edge – Jet Rail Linear Roller Blocks – Loading Instructions

Go to http://lm76blogger.com/linear_motion/1407 for an Application of Jet Rail Linear Roll Blocks

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

The Engineering Edge – Application – Trunnion Grinding Slide for Oil Field

 

We are shipping another slide today for the oil patch. When Weir Oil and Gas called with a slide application that required special engineering, LM76 was all ears – as it was right up our alley. This slide is a Trunnion Grinding Slide which has a 56HP motor running at 3500 RPM mounted to the Y Axis – with a 12″ grinding wheel attached. The X Axis (52″ Stroke) runs on 440C stainless linear ball bearings that have special beryllium copper scraper seal cartridges while the Y Axis (4″ Stroke) employs profile rail guides with double scraper seal kits. Our customer did not want protective bellows so we had to ensure grinding debris would not cause bearing or screw/nut failures. On both axis, we employed our proprietary “Polymatrix, Double Preloaded Nuts” as opposed to recirculating ball nuts. Why LM76? Good question…we were the only company that got back to them with a thoughtful solution.

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

The Engineering Edge – Application – Whisper Slides for Harvesting Honey

Engineering Edge - Honey Application

Sometimes, an application leads you to an immediate, off-the-shelf solution – like this one. Harvesting bee honey is a seasonal opportunity and these systems are hauled across the country to make it happen. They need to be all weather, tough and maintenance-free. The next time you take some honey and put it in your tea, think of us – LM76.

 

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

Water Dog Sliders from LM76 are FDA/USDA/3-A Dairy Compliant!

Engineering Edge - FDA/USDA/3-A Dairy Compliant Linear Slides
engineering edge - Linear slides

 

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

LM76
Visit our Website
Order Our Catalog

New Lintech Profile Rail Linear Recirculating Bearings Are Available from Electromate!

Lintech MR Series, ARC Series, and HRC Series Profile Rails available from Electomate

Motion Control - Electromate-Logo

 

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Components – Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

  • Size 15, 20, 25, 30, 35, 45
  • N, H and P accuracy grade
  • V0, V1 and V2 block pre-load
  • Short/Normal/Long block lengths
  • Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

featuring:

  • 2 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • SS bearing, rail, and balls
  • Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

featuring:

  • Application Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

 

featuring:

  • Heavy Load Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Introducing Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings!

Lintech MR Series, ARC Series, and HRC Series Profile Rails available from Electomate

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control -Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

 

  • Size 15, 20, 25, 30, 35, 45
  • N, H and P accuracy grade
  • V0, V1 and V2 block pre-load
  • Short/Normal/Long block lengths
  • Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

featuring:

Lintech MR Series Profile Rails available from Electomate

 

  • 2 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • SS bearing, rail, and balls
  • Self-lube reservoir standard

 

ARC Series –Standard Profile Rail Linear Guides

featuring:

Lintech ARC Series Profile Rails available from Electomate

 

  • Application Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

 

HRC Series– Heavy Profile Rail Linear Guides

featuring:

Lintech HRC Series Profile Rails available from Electomate

 

  • Heavy Load Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Custom Manufacturing Of Complete Systems & Components by LM76!

Linear Motion Control – LM76 Expands Custom Manufacturing Capabilities!

 

Motion Control  - LM76 - Machined-Components and Systems

Linear Motion - LM76-Pat-Logo-3

Motion Control Components and Systems – LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Linear Motion - LM76 Custom Manufacturing and Custom Machining Facility

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

Linear Motion - LM76 Custom Shafting

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:  

http://lm76.com/linear_shafting.htm

 Components, and …

 

lm76-machined-components-05

For additional information go to:  http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

 

Linear Motion - LM76's Custom Linear Motion Systems

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel.  Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

 

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Motion Control – Custom Manufacturing Of Complete Systems & Components by LM76!

Linear Motion Control- LM76 Expands Custom Manufacturing Capabilities!

 

Motion Control - LM76 - Machined-Components and Systems

Linear Motion - LM76-Pat-Logo-3

Motion Control Components and Systems – LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

Linear Motion - LM76 Custom Manufacturing and Custom Machining Facility

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

Linear Motion - LM76 Custom Shafting

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:  

http://lm76.com/linear_shafting.htm

 Components, and …

 

lm76-machined-components-05

For additional information go to:  http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

 

Linear Motion - LM76's Custom Linear Motion Systems

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel.  Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

 

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Motion Control – Simple, Super Low Friction Linear Motion Conveyance System

Transporter 2 Roller Block and Rail system from LM76
lm76-transporter2-block-and-rail-system-01

LM76-Pat-Logo-3

 

 

 

 

 

 

 

 

 
lm76-transporter2-block-and-rail-system-02

The Transporter 2 Roller Block and Rail system from LM76 is just that…practical. A black anodized aluminum carriage plate which features 4 plastic wheels pressed over ABEC 1 roller bearings. Transporter’s rail features a ceramic coated aluminum extrusion which offers a hard, extremely durable running surface. Transporter 2 offers 2 carriage plate designs: Option 1 is a standard block with 4) 10-32 mounting holes. Option 2 is a longer and more narrow block with 4) 10-32 mounting holes and a hand lock assembly. This low friction, maintenance free system is superb for sliding doors, manual assembly lines, camera motion and any other applications where low friction motion is required. Transporter is not for high loads or moment loading or for applications which require high speed, critical accuracy or wash down.

 

Load Data

Max  ZO Max YO
15 Lbs. 15 Lbs.
Max Speed 10″ Per Second
  • Machine Tool Sliding Doors

  • Postal Equipment Linear Transporters

  • Monitor Stands

  • Hand/Manual Assembly
    Lines

  • Lab Equipment

  • Syringe Docking/Filling
    Systems

  • Cable&Hose Management System Guidance Trolleys
    (i.e. igus/A&A Gore-Tite)

  • Aerial Pneumatic Tool
    Festoon Followers

  • Table Top Conveyance –
    Arts and Crafts

  • Positioning for Measurement
    Components

  • Cable Reel Followers

  • Furniture Sliders

  • Closet Door Sliders

  • Small Appliance Sliders

  • Rack Shelf Sliders

  • Pulley Dancers

  • Moveable Armrest Sliders for Wheelchairs

  • Small Camera Slider

  • Wall Sliders for Monitors
    and Flat Panel Displays


Carriage Block P/N
 
TPS
( Standard Block)
TPL
Long and Narrow Block with
Hand

 

TPS Standard Block

TPL Long Block

Dimensions



A
±.010
B
±.010
C
±010
D E
1.000 0.620 0.125 0.940 0.500
F Standard Rail Lengths H
Screw Inch
H1 H2 H3
1.500 7,13,19,25,31 # 10 .375 .220 .206
NOTE: Rails are available up to 10 feet long. We will cut special lengths and provide special hole locations if provided a print.
Please call Christine
Carlson 1-800-513-3163
for further information
or email sales@LM76.com

Rail P/N
Length

LR3

?

Part Number Example: LR3-36

1 LR3 Rail – 36″ Long

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website

Linear Motion – How Do You Move Articles of Antiquity?

Linear Motion Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

Linear Motion - Moving Articles of Antiquity using LM76 Rail System

LM76 - Linear Motion

E. Longmeadow, MA – — The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

The MFA contracted CBI Consulting of Boston to design the frame and fixturing. Craig Barnes, an award winning architectural engineer called Mike Quinn of LM76 to review the linear motion application. Over the course of several weeks, LM76 and design partner Todd Kanipe designed a telescoping, high load roller/linear motion rail system that won approval. According to CBI’s Keith Bouchard, the linear rail system moves very smoothly and so far meets the expectations of this program.”

Linear Motion Application – According to MFA Antiquity Specialist Jean Louis Lachevere, “All of these moves present very real dangers to the artifact being transported. In this case, we have a 8000 pound relief which already has its problems due to age and the fact that it is limestone ( limestone is very vulnerable to the atmosphere ).” Seen from the front, the relief is straight. From the back, much of the top back is gone. Thus, the back of the relief has to be plastered so the back is flat. Pins are inserted to further reinforce the relief and then it is tipped on its back. It is then moved to its new atmospherically controlled display case. LM76’s design is used in the transfer from the dolly to the mounting rails and restraints in the display case. This 36” motion is fraught with things that can go wrong. One of the considerations is the possibility of an earthquake…any problem conceivable is taken into account.

Motion Control  - Moving Articles of Antiquity using High Load Rail SystemCastors and sliders at end of armature. The sliders are mounted to the castors and work like telescoping drawer slides.

 

Linear Motion - High Load Rail System Moves Articles of AntiquityCastors and sliders as seen from below. The chalk X is used to mark the block where added weld is required. Each block is to be welded both sides. Each slider is to be addressed.

 

Motion Control Challenge - Moving Articles of Antiquity!Photo demonstrates that the wheels can rotate independently.

 

 

Moving Articles of Antiquity with High Load Rail SystemView of the slider assembly at the center of the welded fixture.

 

 

 

 

 

For Additional Information on LM76’s High Load Rail Systems go to: http://www.lm76.com

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

LM76