Category Archives: Motors – DC

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – Rotational Voice Coil Stage quickly and repeatably steers an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

Motion Control – Rotational Voice Coil Stage

Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree optical step-and-settle in less than 5ms; Fully integrated servo controller; USB 2.0 and auxilary user electrical interfaces; X 58 x 28 x 21 millimeters, 30 grams

motion control - miniature stages

Forestville, CA – The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and accurately set an angular position. The frequency is factory adjusted to customer specifications during the manufacturing process. Amplitude of the resonating mirror can be adjusted through either an analog input voltage or the USB interface.

motion control - miniature components

An optional high-resolution position feedback sensor can be monitored by an analog output signal on the User Connector. The RS-25 Resonant Scanner can also be configured with a high-resolution 16-bit Analog to Digital Converter to quickly sample and report the mirror position at any moment if the position sensor is included.

Motion Control – 1.25 Inch Stroke Linear Voice Coil Motor Tolerates Tilting and Misalignment is available from Moticont!

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control- A Wide Variety of High-performance Drives from Maxon Motor!

Motion Control – High Performance Drives

maxon, high precision drive specialist, launches high-torque product innovations this Spring. These include higher performance flat motors, drives with higher torque output, and new additions to the GPX gearbox family.

motion control maxon motor

motion control - maxon motors

 

 

Another addition to the EC-i family includes the, EC-i 40 High Torque 130 watt brushless motor. This drive was originally developed for power tool applications. To meet the high demand for higher-torque drives, maxon is mass producing the EC-i motor with an additional 34.8 mm in length. The versions with a fan offer up to 100 percent more power.Taunton, MA — Motion Control Components -The new, maxon EC-i 52 Power up brushless motor meets customer demands for industrial applications with higher torque. The new version of the EC-i 52 now achieves a torque of up to 1 Nm. This increase in performance is due to improved cooling, the ventilated version of the EC-i 52 Power up reaches 420 watts of nominal power.

Motion Control – Vacuum Compatible Voice Coil Actuator with Integrated Thermal Sensor

Motion Control – Vacuum Compatible Voice Coil Actuator

motion control -linear actuator


motion control- h2wSanta Clarita, CA —– Motion Control – H2W Technologies, Inc. has designed and manufactured a non-commutated DC actuator, otherwise known as a
voice coil actuator, designed for vacuum operation in a cryogenic environment. H2W has worked with several aerospace customers, developing manufacturing processes and material selection to provide customers with the ability to design motors with low-outgassing in UHV conditions, which meet NASA’s Collected Volatile Condensable Materials and Total Mass Loss requirements.

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

motion control - electromate


motion control - electromateTORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – 5 challenges an electric motor has to overcome on Mars

Motion Control – Electric motors on Mars

Outer space is unforgiving. This is why precision drives embarking on a trip to other planets need to meet extremely high-quality standards.

motion control - motor for mars

motion control - maxon

 

 

Taunton, MA — Motion Control Products – Every Mars drive from maxon is based on a catalog product and is modified for the specific mission. That’s because the DC motors, gearheads, and encoders face brutal conditions during liftoff, the long journey through space, and the mission on the Red Planet. In this blog, I will talk about the properties a drive needs to have to qualify for a journey to Mars.

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

Motion Control – Vacuum Compatible Voice Coil Positioning Stage from H2W Technologies

Motion Control – Vacuum Compatible Voice Coil Positioning Stagemotion control - vacuum compatabile

motion control- h2w

 

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies designed a voice coil positioning stage (VCS05-060-VBS-V0005AR) to operate in the vacuum of space, using our voice coil motor (NCC05-18-060-2X) to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.7mm]. The absolute 0.05-micron (50-nano meter) resolution encoder is suitable for very high precision applications.

Motion Control – maxon celebrates International Women in Engineering Day!

Motion Control – maxon celebrates International Women in Engineering Day!

The women in engineering (WIE) at maxon work eagerly to contribute to the success of advanced technology in the motion control industry. This week in honor of International Women in Engineering Day, June 23, 2021 – maxon wishes to thank these engineering women for their contributions as they continue to help shape the world we live in.

motion control - engineers


motion control - maxon motorsTaunton, MA — Around the globe, the maxon women in engineering are working on motion control applications with their customers, they focus on new product designs to implement the latest technologies and continue to research new concepts and ideas for drive systems to be used in motion control applications found in Medical, Industrial Automation, Aerospace and Defense, and Mobility industries.

Motion Control Application – Congratulations to Emirates Team New Zealand – Winner of the 36th America’s Cup!

Motion Control Application – Motors

They have gone and done it again. Emirates Team New Zealand have retained the America’s Cup over the Italian Challenger Luna Rossa Prada Pirelli.

motion contyrol - motor application


motion control - maxonTaunton, MA — Motion Control Products – maxon Group extend their heartfelt congratulations to Emirates Team New Zealand. In the historical 36th America’s Cup that endured extra challenges including Covid-19, race cancellations and delays meaning interruptions and last-minute tactical changes, the Kiwis have retained the oldest trophy in international sporting history.

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Motion Control – Hollow Core Voice Coil Motor

Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).

motion control - moticont

The hollow core allows for optics, illumination, laser beams, or cables to pass through. With a 0.50 in. (12.7 mm) stroke length, a continuous force rating of 4.8 lbs (21.3 N) and a peak force of 15.15 lbs (67.4 N) at a 10% duty cycle, this compact voice coil motor measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length, is ideal for applications such as: Positioning, medical diagnostics and testing, laser beam steering, dynamic vibration absorption, optical focusing, laser cutting & welding, scanning, assembly, and wafer handling.

Motion Control – Maxon introduces a multi-axis controller for highly dynamic positioning tasks!

Motion Control – Miniature Multi-axis Controller

Maxon is launching the next generation of Motion Controllers with its MiniMACS6-AMP-4/50/10. The controller is ideal for use in applications where PLC solutions may be too expensive or cannot meet customer-specific requirements.

motion control - miniature controller

Taunton, MA — Motion Control Products – Maxon’s new multi-axis controller, the MiniMACS6-AMP-4/50/10, offers precise and highly dynamic control of up to six brushed DC motors or four brushless DC motors (up to 540 W continuous output power and 1.6 kW peak output power).

motion control - maxon motors

 

 

The controller is an economical and compact solution for system designers who develop autonomous robots or shuttle systems

A significant advantage of the new multi-axis solution is that it is programmable with the comprehensive ApossIDE automation software and the license-free Motion Control Library (written in C). Integrated bus interfaces enable efficient data exchange with higher-level controllers; however, it is also possible to run complete process sequences autonomously, without a PLC or PC. The MiniMACS6-AMP-4/50/10 will be available in early 2021.

Motion Control – 3/4 Inch Diameter Voice Coil Motor Features: High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – 3/4 Inch Diameter Voice Coil Motor!

 

motion control - voice coil motor


motion control - moticintVan Nuys, CA – Moticont has introduced the GVCM-019-016-02 Linear Voice Coil Actuator (Linear DC Motor).

This small 0.75 in. (19.1 mm) diameter actuator, also called an Electric Cylinder, has a high force to size ratio of 7.4 oz (2.1 N) continuous force and 23.7 oz (4.4 N) of peak force and a stroke length of 0.250 in. (6.4 mm). The housing measures just 0.625 in. long and in the fully extended position the shaft extends 0.436 in. (13.5 mm) beyond the face of the housing.

Motion Control – Dual Feedback Voice Coil Positioning System!

Motion Control – Positioning Stage
motion control voice coil positioning stage


motion control - h2w

 

 

Santa Clarita, CA —– Motion Control – H2W Technologies’ latest custom voice coil positioning stage (VCS08-350-LB-01-MC-F) was developed to meet the dual feedback requirements of the customer. This closed loop system allowed the user to monitor both position and force simultaneously and adjust accordingly. It incorporates a voice coil motor (NCC08-34-350-2X) which generates a continuous/peak force of 35.0 lbs [156 N]/105 lbs [467 N] with a total stroke length of 0.80 in [20.3 mm].

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Electric Cylinder has Increased Throughput!

 

motion control - electric cylinder

motion control - moticont
Van Nuys, CA — The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – Maxon and Fourier Intelligence join forces to transform rehabilitation technology!

Motion Control – Transforming Rehabilitation Technology!

maxon Group and Fourier Intelligence announce that they are entering into a global strategic partnership. maxon’s precision drive systems and the start-up Fourier’s Intelligence’s rehabilitation robotics are a perfect match and are expected to drive the development of new technologies for patients.

maxon - motor technology


motion control - maxon motorTaunton, MA — Motion Control Products – Technology plays an increasingly important role in rehabilitation services and healthcare. Therefore, clinicians, engineers and companies recognize that they need to accelerate the development of technological solutions to best meet the needs of patients. This is the main goal of the partnership between drive specialist maxon and start-up Fourier Intelligence, which specializes in exoskeletons and robotic rehabilitation.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

motion control - moticint

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Motion Control – Don’t Just Settle! Select the “Right” Miniature Linear Voice Coil Motor for the Application!

Motion Control –  Miniature Linear Voice Coil Motor!

motion control - moticont

motion control - moticint

 

 

Van Nuys, CA — Motion Control Components – Moticont has added two miniature linear voice coil motors to its LVCM family of Linear Voice Coil Motors! Sharing the same physical dimensions, each is just 1.000 in. (25.4 mm) in diameter and the housings are 1.500 in. (38.1 mm) long. As every application is different Moticont offers two motor in the LVCM-025 Series of Voice Coil Motors. The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

Motion Control – Introducing the World’s Most Compact 1500 Watt Integrated Servo Motor!

Motion Control –  1500 Watt Integrated Servo Motor!

motion control - integrated servo motor

JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors.
motion control - electromate

 

 

Vaughan, Ontario, Canada — Motion Control Products — JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.

New Compact Motor

The MAC1500 motor sets completely new standards for the performance and size of servo controls. With a length of only 182mm for a 1500W motor with a torque of 4.78/14.3 Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm.