Category Archives: Motors – High Speed

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – Miniature Voice Coil Motor

motion control - voice coil actuator


motion control - moticont

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long. This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

This clean, quiet, efficient, low inertia, high reliability actuator is ideal for: Heptic feedback and pipetting in medical devices, switch activation, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser, machining and drilling, optical focusing, and dynamic vibration absorption. Moticont also offers DC and servo motor drivers.

Is there a need for a higher force or longer stroke? There are currently 7 series of Moticont GVCM motors based on diameter of this motor.

To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

 

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

 

 

Motion Control – Maxon’s trade show experience goes virtual!

Motion Control – Virtual Trade Show!

motion control - trade show

 

motion control - maxon logo

Taunton, MA — Motion Control Products – This year, the COVID-19 pandemic has led to the cancellation of nearly all trade shows. Despite this, maxon is offering a digital trade show experience to all of its customers and anyone who’s interested in learning about the latest in drive technology. Visitors to maxon’s virtual booth will discover the benefits of our latest products such as the MiniMACS6 master controller, learn about high torque brushless DC motors as well as flat motors for robotics, and get to know the Mars rover. Visit virtualbooth.maxongroup.com and contact us to get your ideas moving.

If you prefer watching an entertaining video introducing all the latest products maxon brought to the market this year, you will find it here: https://youtu.be/Jtw7Hwxbdr4 Have fun watching! For more information please contact us at info.us@maxongroup.com or 508-677-0520.

About Maxon

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon has more than 3000 employees at nine production sites and is represented by sales companies in more than 30 countries.

Maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

motion control - handbook
 

 


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

motion control - maxon logo

Motion Control – Hollow Core Voice Coil Motor Has Low Inertia, High Precision available from Moticont!

Motion Control – Hollow Core Voice Coil Motor!

 

motion control - hollow core voice coil actuator

 


The HVCM-051-025-013-01 Linear actuator has a hollow core that allows for optics, illumination, laser beams, or cables to pass through, additionally, it has a continuous force rating of 5.3 lbs (23.7 N) and a peak force of 16.9 lbs (74.8 N) at a 10% duty cycle. This compact voice coil actuator measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length with a 0.50 in. (12.7 mm) stroke is ideal for applications such as: Medical diagnostics and testing, laser beam steering, wafer handling, laser cutting and welding, dynamic vibration absorption, optical focusing, scanning, assembly, and positioning applications.Van Nuys, CA — Motion Control – Moticont introduces an open aperture (hollow core) voice coil or moving coil linear motor from Moticont, the HVCM-051-025-013-01. Featuring an open aperture of 0.50 in. (12.7 mm) this low cost, clean room friendly non-commutated motor is available off-the-shelf. The light weight and low inertia moving coil of the linear actuator demonstrates: High acceleration/deceleration, high speed, zero cogging, and by connecting directly to the load, zero backlash.

Two 10-32 UNF-2B x 0.25 in. (6.4 mm) deep threaded mounting holes on 1.000 in. (25.4 mm) centers in the housing and coil allows for flexible and easy integration into new and existing applications. When used in closed loop applications with an adequate optional position sensor, resolutions of less then 1 micron are achievable for millions of cycles. If a longer stroke, higher force, a smaller foot print, or customized mounting is required, consult Moticont’s team of engineers. All of Moticont’s voice coil linear actuators are available as complete plug-and-play systems, including: Position sensor, servo driver, power supply, and if required with a linear position sensor.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticont

All of Moticont Components

Moticont Videos

Motion Control – New from MAXON, Miniaturized Controller the EPOS4 Micro 24/5 CAN!

Motion Control – Miniaturized Controller

motion control micro controller

 

Maxon Logo

Taunton, MA — Motion Control Products – Maxon is launching a new, miniaturized controller with a size of only 32 mm x 22 mm as part of its successful line of positioning controllers. The attractive price-performance ratio, with a functionality that’s virtually identical to the larger units, addresses cost-sensitive single- and multi-axis applications.

The functionality, operation, software, and accessories of the new controller are derived almost directly from the existing products in the EPOS4 range. The device is suitable for use with both brushed DC and brushless EC motors (BLDC) of up to 120 W and has comprehensive feedback options such as Hall sensors, as well as digital incremental and SSI absolute encoders. State-of-the art concepts such as Dual Loop, Field Oriented Control (FOC), feed forward, and observer control allow optimal control in a wide variety of applications.

The existing digital and analog inputs and outputs are freely configurable and ideally matched to the numerous functions and operating modes of the CiA-402 positioning controller. The intuitive EPOS Studio start-up software, as well as libraries and programming examples for integration in a wide variety of master systems, are available free of charge and make operation as easy as possible. A plug-and-play EvaluationBoard (EB) is provided for initial commissioning. The offer is rounded out by a comprehensive scope of accessories and detailed product documentation.

The first derivative of this new micro design is the CANopen version, which can also be addressed via RS232 or USB, as usual. In spring 2020, the EPOS4 Micro 24/5 EtherCAT will follow as a second product of similarly small size.

Visit epos.maxongroup.us for the latest updates about EPOS and individual devices, EPOS Studio, as well as all downloads and technical documentation.

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Handbook Banner


See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

 

Maxon Logo
Visit our Website
Order Our Catalog

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control Voice coil motor with temperature sensor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – COVID-19 – Linear Actuators for Medical Ventilators and Respirators Available in OEM Quantities!

Motion Control – COVID-19 – Linear Actuators for Ventilators 

motion control ventilator actuators

 

MotiCont-Logo

Van Nuys, CA – Motion Control – During the COVID-19 pandemic engineers and designers of medical devices are working 24/7 to design and manufacture critically needed life support and testing equipment. Moticont has a proud history of supplying precise, reliable voice coil linear actuators used in medical ventilators and respirators, and will be especially quick to respond to the need for actuators in OEM quantities as well as requests for custom prototypes.

Moticont manufactures three lines of linear voice coil actuators that are ideally suited for medical ventilators, respirators, and dispensing of reagents. Each of the pictured actuators are clean reliable voice coil actuators with a guided shaft that is designed to couple directly to the load and therefore has zero backlash. The three lines are the: GVCM series, SDLM series, and DDLM series.

Each of these lines of low cost, clean, brushless, compact actuators features attributes critical to Life Support equipment: Very low Mean-Time-Between-Failures (MTBF), extremely efficient, low hysteresis for greater repeatability, highly controllable force, stroke length, and speed, low noise, maintenance free, and can be easily integrated into new or existing applications. The GVCM series and DDLM series of Linear Voice Coil Actuators can be used with a position sensor and the SDLM series of Linear Voice Coil Actuators has an integral encoder. The DDLM and SDLM actuators are fully enclosed actuators.

For assistance in selecting the best linear actuator for a specific application such as: Life support in ventilators or respirators, reagent dispensing, sampling, sorting, or assembly, contact the Moticont sales team.

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – Maxon EC-i 30 20W Motor with Integrated Electronics is available from Electromate!

Motion Control – Miniature Integrated Motor
motion control miniature integrated motor

 

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Maxon have released the new EC-i30 20W Brushless Servo Motor with Integrated Electronics. With an integrated 4 Quadrant speed controller, this latest addition to the EC-i portfolio is available as a 5-wire version. Both enable and direction versions of the motor are offered.

This high torque 20Watt 30mm diameter motor is ideal in micro fluid pump (air/gas) and medical applications such as:

  • Vacuum wound therapy
  • Patient vital signs monitoring
  • Anaesthesia and gas monitoring
  • Compression therapy
  • Blood analysers
  • Peritoneal dialysis
  • Haemodialysis
  • Portable oxygen concentrators
  • Gas detection and analysis
  • Fragrance distribution
  • Surgery training systems

The EC-i30 20W Brushless Servo Motor with Integrated Electronics is available with an optional planetary gearhead, model GP32C, and can be customized specific to the needs of the application.

Features include:

  • Cost-effective
  • 20 Watt Rated
  • 24VDC winding
  • 4 Pole Pairs
  • Speed range 250 – 6060 RPM
  • Optional gearheads, encoders and drive electronics

Order your EC-I 30 20W motor with Integrated Electronics online now at-

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Buy Online

Information on the EC-i 30 20W with Integrated Electronics Brushless Servo Motor from maxon can be viewed at:

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


For other Motion Control Components, Applications, and Technology from Maxon Motor go to: http://AllMotionBlogger.com
 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Voice Coil Motor with Internal Shaft and Bearing Features 63.9 lbs of Continuous Force!

Motion Control – Voice Coil Motor
motion control voice coil motor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added a new high force voice coil motor to its GVCM family of voice coil motors with an internal shaft and bearing. The new GVCM-095-089-03 Linear Voice Coil Motor (also known as linear DC motor) features a continuous force of 63.9 lbs (284.1 N) and 202.0 lbs (898.4 N) of peak force at a 10% duty cycle. Guided by a long-life plain bearing that can allow side loads up to 3 lb (13.5 N), the precision ground 0.236 inch (6.0 mm) diameter shaft with an internal thread has a stroke length of 0.5 in. (12.7 mm). The quiet, efficient, smooth, cog-free motion of this low inertia brushless GVCM-095-089-03 Linear Voice Coil Motor is ideal for: Clamping, work holding, sorting equipment, assembly, medical devices, antenna positioning, testing, slide actuators, shutters, doors, valve actuation, wafer handling, and optical focusing.

This new voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size in either direction, in a housing measuring just 3.75 in. (95.3 mm) dia. x 3.5 in. (88.9 mm) long. The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into new and existing applications.

Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s expanding line of GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://www.moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


For other Motion Control Components, Applications, and Technology from Moticont go to: http://MotionControlBuyersGuide.com
 

MotiCont-Logo
Visit our Website
Other Products
Videos

 

See this and other Motion Control Components from Moticont are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – John Uzzolino joins Maxon Group to head up the Parvalux product line in the United States!

Motion Control – John Uzzolino joins Maxon Group 

Motion Control - Maxon Parvalux

 

Maxon Logo

Taunton, MA — Maxon Group of Taunton, MA has hired John Uzzolino to head up the business development activities for the Parvalux product line in the United States. In December, Maxon Group acquired the British geared motor manufacturer Parvalux Electric Motor, Ltd. (For additional information Click Here)The acquisition expands the maxon portfolio with DC drives in the power range of up to 1.5 kW, as well as an attractive expansion of maxon group’s already broad motor and motion control portfolio including AC Motors and Worm gearboxes. The acquisition and the addition of Mr. Uzzolino to the team demonstrates maxon group’s continuing commitment to becoming a provider of complete systems. Ultimately, the acquisition opens interesting new markets requiring larger drives and motion systems such as patient handling within the medical technology sector (stair lifts, electric wheelchairs, etc.) and industrial applications (robotics and transport systems, conveyors).

John Uzzolino comes to maxon Group with 20 years’ of experience in industrial motion control and mechatronics applications. John started his career as a Sales Engineer working with a high tech distribution company, focusing on solving motion control and mechatronic applications for machine builders in the Northeast U.S. John then went to work for a local machine builder, helping them bring their automated test and measurement products to the North American market. Most recently, John worked for two European control manufacturers, helping them develop customers in the U.S. market.

As the Business Development Manager for Parvalux, John will be responsible for managing and promoting the Parvalux products in the United States, initially focusing on the industrial and e-mobility markets. “I’m excited to be on board and help bring a strong European brand to the U.S. market,” says John Uzzolino. “Parvalux has positioned themselves well to be a high-quality product at a competitive price, while offering both standard and highly customized solutions globally. Combining this with the ability to now manufacture locally in Massachusetts, positions Parvalux well to build a strong brand here in the U.S.”

motion control - Maxon Parvalux building

About Parvalux

Parvalux is a leading global manufacturer of geared motor solutions with over 70 years’ experience in creating the perfect combination of motor and gearbox to match the customer’s application. Parvalux offer thousands of standard options as well as customization of any motor or gearbox to meet customer requirements. Parvalux products are found in hundreds of applications in healthcare, leisure, mobility, transport, and a diverse range of industrial applications. For more visit www.parvalux.com

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Handbook Banner


For other Motion Control Components, Applications, and Technology from Maxon Motor go to: http://Automation-Blogger.com
 

Maxon Logo
Visit our Website
Order Our Catalog

 

See this and other Motion Control Components from Maxon are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Moticont Voice Coil Motor with Internal Shaft and Bearing Features 3.75 Inch Stroke Length!

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – The GVCM-051-127-01 Linear Voice Coil Motor is Moticont’s newest linear DC Motor with Internal Shaft and Bearing. The 3.75 in. (95.3 mm) stroke of the precision ground 0.236 (6.0 mm) diameter shaft with an internal thread, is guided by a long-life plain bearing that can allow side loads up to 1 lb (4.4 N). The housing and coil ends of the motor have threaded mounting holes in the housing and coil ends for easy integration into existing and future applications. This brushless voice coil actuator features: High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, and a high force to size ratio of 5.0 lbs (22.2 N) continuous force and 15.8lb (70.3N) of peak force in either direction, in a housing measuring just 2.00 in. (50.8 mm) dia. x 5.00 in. (127.0 mm) long.

Clean, quiet, efficient, with low inertia the GVCM-051-127-01 Linear Voice Coil Motor is ideal for: Assembly and sorting equipment, work holding and clamping, medical devices, wafer handling, optical focusing, antenna positioning, testing, slide actuators, shutters, doors and valve actuation.

Moticont’s GVCM-051-127-01 Linear Voice Coil Motor can be ordered as a complete plug-and-play system including an encoder and servo controller for precise closed-loop operation. Is there a need for a smaller or larger diameter motor, one with longer stroke, or more force? There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application, please visit: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800,moticont@moticont.com or visit the website at http://www.moticont.com


For other Motion Control Components, Applications, and Technology from Moticont go to: http://AllMotionBlogger.com
 

MotiCont-Logo
Visit our Website
Other Products
Videos

 

See this and other Motion Control Components from Moticont are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net