Category Archives: Robot – XY Gantry

Motion Control – Single Rail Positioning Stage H Gantry from H2W Technologies.

H2W Technologies Single Rail Positioning System

H2W Logo

Santa Clarita, CA —– H2W Technologies’ latest single rail positioning stage H-gantry design is an open frame XY positioning system. It has two bottom parallel axes with one cross axis connecting the two (H-gantry).

Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; can generate 6.2 lbs [27.8 N] of continuous force and 18.7 lbs [83.3 N] of peak force, or a combined 12.4 lbs [55.6 N] continuous force and 37.4 lbs [166.6 N] of peak force on the bottom axis. The non-contact 1-micron resolution encoders allow for precise positioning. The moving tables are guided by a precision recirculating linear ball bearing system.

The linear axes are assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. The top cross axis is mounted to the bottom parallel axis using rigid aluminum extrusions, 90-degree right angle gussets, and custom extrusion end plates. The system is mounted to a flat aluminum tooling plate base. There are also provisions that allow customer cables to be routed within the cable carriers. It has end-of-travel rubber bumper stops.

Additional options include, a home positioning sensor, end-of-travel-sensors, and custom mounting holes. Single extrusion length of up to 6 m long, allows for longer stroke applications.

Features:

  • Low system weight
  • Built using standard extrusion profiles
  • Cable carriers to route payload cables
  • Three axis of coordinated motion

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

See Article: https://www.h2wtech.com/article/single-rail-positioning-stage-h-gantry

See Video at Youtube: https://youtu.be/y25d5vgx838

See Product: https://www.h2wtech.com/page/single-rail-positioning-stage-h-gantry

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – New 300 mm x 300 mm Open Aperture XY Gantry Robot from Intellidrives!

Intellidrives’ Precision BEMA45 Open Aperture Gantry Robot features 50 micron repeatability!

Intellidrives Motion Control Component - 300 mm x 300 mm open aperature gantry robot

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – The new 300 mm x 300 mm (11.811 in. x 11.811in.) open aperture BEMA45 gantry robot from Intellidrives supports tooling, testing, scanning, and vision systems up to 15kg (33.07 lbs). The 75 mm/rev (2.953 in/rev) precision lead scews can move in the X and Y axes at up to 1 m/sec (39.370 in/sec) and X and Y axis travel are 300 mm x 300mm (11.811 in. x 11.811in.) This low profile gantry is just 141.5 mm (5.571 in.) high. The table top measures 380 mm x 380 mm (14.961 in. x 14.961 in.)

Available motor mounts include NEMA 17 and NEMA 23 mounts for steppers or servo motors with encoders. Constructed using a strong extruded alumiunm frame, the dual X axes design, and 4 precision leadscrews provides ± 50 microns of repeatability on axis. This open gantry robot is easy to integrated into new and existing applications as the spacing and positioning of the support legs for the Y axis (lower axis) can be positioned independently of each other.

Options for the BEMA45 300 mm x 300 mm Open Aperature XY Gantry Robot includes: Stepper motors, servo motors and encoders, drives, controllers, controlles, and software. It is also available as a complete plug-and-play package.

Intellidrives Motion Control Component - 300 mm x 300 mm open aperature gantry robot (dwg)

 

FOR ADDITIONAL INFORMATION – CLICK HERE

 

About IntelLiDrives —

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL