Category Archives: Servo Drive – Four Quadrant

Motion Control – Excellence Canada announces Electromate is a recipient of the 2021 Canadian Business Excellence Awards for Private Businesses!

motion control - electromate


motion control - electromateTORONTO, Canada — Motion Control – TORONTO, May 21, 2021 (GLOBE NEWSWIRE) – Electromate Inc. is pleased to announce that, at the upcoming fifth annual Canadian Business Excellence Awards for Private Businesses being held on Wednesday June 9th, Excellence Canada will be awarding Electromate with their Canadian Business Excellence Award.

“Recipients of this distinguished award have clearly demonstrated a strategic approach to successfully improving business performance and achieving goals, with a focus on the following three key performance areas: Delighted Customers; Engaged Employees; and Innovation,” says Allan Ebedes, President and CEO, Excellence Canada.

Excellence Canada’s mission is to help improve organizational performance and recognize excellence, with a vision to promote and enable excellence in every organization in Canada.

Motion Control – Panel Mount Servo Drive Provides Centralized Control & Offers High Bandwidth & Quick Response Times!

Motion Control Component - Panel Mount Servo Drive from Servo2Go

Servo2Go-Logo

Greenville, DE —-Motion Control Components – The AB25A100 PWM servo drive from Advanced Motion Controls is designed to drive brushless and brushed DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against overvoltage, under-voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes. This drive can use quadrature encoder inputs for velocity control. Features include:

  • Built-in hardware protection – Over Current, Over Voltage, Under Voltage, Over Temperature, Short Circuit
  • DIP Switches and Potentiometers for loop tuning, current limit adjustments and drive configuration
  • Standard models support both brushless and brushed motor types
  • Velocity feedback via incremental encoder, Hall Sensors, or tachometer
  • Optical isolation between high and low power signals standard on certain models
  • Current, Velocity, and Fault Monitor analog output signals
  • Status LEDs for power and drive status
  • Four quadrant regenerative operation

CLICK HERE for more information on the AB25A100 Servo Drive from Advanced Motion Controls.

These and other Motion Control Products are available throughwww.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Low Cost 4 Axis Servo Controller for High Speed, Low Inductance Motors Available from Moticont!

Motion Control Components - Moticont 4 Axis servo Controller

MotiCont-Logo

 

 

Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with latest FPGA technology for required extensive calculations.

This compact, low cost, plug-and-play multi-axis servo motion controller is supplied with power supplies, servo motor drivers, USB cable and free control panel software. The user friendly software allows for quick set-up and operation. It can be controlled using a Micro-Controller, PLC and PC using a popular programming language such as C/C++, Visual Basic, LabVIEWTM, or MatlabTM.

This controller series can support up to four axis of motion. Modes of motion include coordinated motion, point-to-point positioning, and jogging.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – AxCent Servo Drives for Centralized Motion Control Systems!

Motion Control Servo2Go-Logo

Motion Control Servo Drives from Servo2GoGreenville, DE — Motion Control – Servo Drives – The AxCent™ Servo Drive (Axes for Centralized control schemes) product platform from ADVANCED Motion Controls brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.

Motion Control AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.

More information on the on the motion control AxCent Servo Drives from Advanced Motion Controls can be viewed at: https://www.servo2go.com/search.php?search=Axcent&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Automation – CANopen Motor Controllers for Electric Mobility and Vehicular Applications!

Automation - Motion Control CANopen Motor Controllers from Servo2Go

Servo2Go-Logo

Greenville, DE — -Automation – Motion Control – The DVC series motor controllers from Advanced Motion Controls are digital four-quadrant servo drives purpose-designed and built to operate today’s modern mobile electric vehicular platforms. Providing high power from battery supplies, the DVC series features a compact design, IP65 construction and multiple operating modes for controlling either permanent magnet brushed or brushless motors. Whether for traction / propulsion, steering, lifting or any other electrically driven actuation, the DVC series is the newest member in a long line of successful motor controlling solutions from Advanced Motion Controls.

The ability to maximize battery life and extend vehicle operations, essentially running ‘lean and mean’, is the key to keeping a vehicle operating at peak performance. With unmatched power density, high efficiency, low weight, cool thermal operation and regen all built in, selecting the DVC series is the obvious choice.

The DVC Series motor controllers operate in torque, velocity, or position mode and provide high power from battery supplies with multiple operating modes for either 3Φ (servo, closed loop vector, or closed loop stepper) or 1Φ motors. The DVC Series communicate over CANopen and are configured with AMC’s DriveWare® 7 configuration software.

Specific applications include: mobile robots, AGV’s, UGV’s, material handling and transport vehicles in both industrial and military environments.

More information on the DVC series motor controllers available from Servo2Go.com can be viewed at:https://www.servo2go.com/search.php?search=DVC2&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link