Category Archives: Servo Motor Drivers

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

Motion Control - Electromate-Logo

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

Motion Control Ventilator Challange

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

Motion Control MIT Ventilator (E-VENT)

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Customer Driven AC Servo Design

motion control servo system

motion control OMRON Logo

Servos – Servo System – The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

To Down Load the 1S Series AC Servo System Catalog CLICK HERE

To view YouTube Video CLICK HERE

For additional on the 1S Series AC Servo System CLICK HERE

To subscribe to OMRON Newsletters CLICK HERE

To contact OMRON about this or other industrial products CLICK HERE

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Low Cost 4 Axis Servo Controller for High Speed, Low Inductance Motors Available from Moticont!

Motion Control Components - Moticont 4 Axis servo Controller

MotiCont-Logo

 

 

Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with latest FPGA technology for required extensive calculations.

This compact, low cost, plug-and-play multi-axis servo motion controller is supplied with power supplies, servo motor drivers, USB cable and free control panel software. The user friendly software allows for quick set-up and operation. It can be controlled using a Micro-Controller, PLC and PC using a popular programming language such as C/C++, Visual Basic, LabVIEWTM, or MatlabTM.

This controller series can support up to four axis of motion. Modes of motion include coordinated motion, point-to-point positioning, and jogging.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – AxCent Servo Drives for Centralized Motion Control Systems!

Motion Control Servo2Go-Logo

Motion Control Servo Drives from Servo2GoGreenville, DE — Motion Control – Servo Drives – The AxCent™ Servo Drive (Axes for Centralized control schemes) product platform from ADVANCED Motion Controls brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize our years of experience in the industry and the latest advancements in modern servo system design.

Motion Control AxCent drives operate with brushless (3Φ) permanent magnet motors as well as brushed (1Φ) motors and inductive loads, and are a cost effective solution that provide high performance and simplicity.

More information on the on the motion control AxCent Servo Drives from Advanced Motion Controls can be viewed at: https://www.servo2go.com/search.php?search=Axcent&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

New Panel Mount Brush Servo Drives for Centralized Motion Control Systems!

Motion Control AMC Panel Mount Brush Servo Drive from Servo2Go

Servo2Go-Logo

Greenville, DE -Motion Control Components – The AxCent™ (Axes for Centralized control schemes) product platform brings the proven and powerful performance expected of ADVANCED Motion Controls, with improvements to the design architecture that utilize years of experience in the industry and the latest advancements in modern servo system design.

As technology continues its shift from analog to digital, there is still strong demand for analog designs. The reason? Analog drives provide some attractive benefits:

  • Simplicity – It’s easy to train your people to set the correct switch and potentiometer settings.
  • Proven Track Record – AMC have been building analog drives since their inception. They have continuously improved their designs to mirror the advances in component technology.
  • Performance – When tuned to maximum performance, analog current loops can often times achieve higher bandwidth and faster response than digital current loops.

How can analog outperform digital? It all comes down to the components. In a digital system, A/D conversions and processing time can add delays ranging from 20 to 100 microseconds. This may not seem like a lot, but in the highest bandwidth systems delays of this magnitude create a sizeable phase lag.

The other driving factor is cost. Large volumes and mature designs make prices attractive for everyone (except our competitors)

CLICK HERE for more information on the New AxCent Panel Mount Brush Servo Drives from ADVANCED Motion Controls

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Automation Motion Control – MAXON Says, “Customize Your Drive System Online!”

Maxon motion control X-Drives Configure online

 

 

 

 

 

Automation Motion Control – Maxon motors introduces a NEW product line of innovative brushed DC motors, planetary gearheads and encoders. customers will find the new motors available for easy online configuration in the online shop. Within 11 working days, the finished drives are ready for shipment. Profit from these fast delivery times now!.

Maxon Logo

Fall River, MA — Maxon motor is introducing new high-speed drives for you to configure. The brushless ECX motors with diameters of 8, 16 and 19 mm achieve peak values of 120,000 rpm, run very smoothly and develop hardly any heat. They are available with different power stages and in standard or sterilizable versions (up to 2000 autoclave cycles). That makes the drives an attractive option for hand-held surgical tools as well as industrial spindles.

Configurable drives: dynamic, high power, and low noise

Configure and combine the DC motor (DCX, DC-max) or BLDC motor (ECX SPEED) and planetary gearhead (GPX) and sensor (ENX) according to your individual requirements, easily and online. After only 11 working days, the drive systems are ready for shipment from Switzerland. Detailed product data can be viewed online immediately and 3D data for the configuration is available for download. Discover the world of maxon X drives!

maxon X drives program

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

High power density, high efficiency, smooth running and available for online configuration.Configure sizes from Ø 10 – 35 mm. Choose between precious metal or graphite brushes, ball or sintered bearings, and much more.

 

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

The DC motors with the best price/performance ratio can be configured online. Configure Ø 16 and 22 mm sizes. Choose between graphite and precious metal brushes, sintered and ball bearings, and many other components.

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Super-fast, configurable brushless DC motors. The brushless ECX series of motors has been optimized for high speeds (up to 120,000 rpm) and withstands up to 2000 autoclave cycles

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Configurable planetary gearheads for high torques in the smallest of spaces. Maxon GPX gearheads are low-noise and low-backlash. Ideal for when high torques and speeds are needed.

 

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Configurable digital encoders. 3-channel encoders with inverse signals for interference free function. The counts per turn may be easily programmed at production.

 

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

NEW Lower Price for Powerful Microstepping Drive from Servo2Go!

Servo2Go - Motion Control, Applied Motion STAC5 microstepping drive

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply!

Servo2Go-Logo

Greenville, DE –— The Motion Control STAC5 microstepping drive provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times.

The STAC5 microstepping drive is available in 120VAC and 220VAC versions, both housed in a compact package.

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply, and features……

  • High performance
  • Built-in power supply & regeneration clamp
  • 120 and 220 VAC models
  • Accepts pulse & direction, streaming commands, stored programming
  • 10/100 MBit Ethernet & EtherNet/IP
  • Advanced anti-resonance
  • Matching high performance motors

All Motion Control STAC5 models include 100Mbit Ethernet communication. The Ethernet interface is used to configure the STAC5 and motor, and also supports the SCL and Q languages over standard Ethernet cabling, addressing and protocols.There are 3 control options available with the STAC5 stepper drives: S, Q and IP.

T• “S” drives can operate in pulse & direction, velocity, and streaming serial (SCL) control modes. To select the control mode, as well as to setup the motor and configure other drive parameters, use the ST Configurator™ software.

• “Q” drives can operate in all of the same control modes as an S drive, plus they have the ability to run stand-alone Q programs stored in non-volatile memory. Q programs are created using the Q Programmer™ software, which provides multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language. Like S drives, Q drives must first be setup and configured using the ST Configurator™ software.

• “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The STAC5-IP drives run all of the same control modes as STAC5-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. STAC5-IP drives are setup and configured using ST Configurator™, and Q programs are created using Q Programmer™.

An encoder feedback option provides position verification, stall detection and/or stall prevention. Applied Motion’s proprietary stall prevention algorithm monitors rotor lag and automatically reduces speed or acceleration to avoid motor stalls, allowing 100% torque utilization. high torque. These are three-phase brushless motors with hall signals for commutation and velocity loop feedback.

The STAC5 can be purchased with a wide range of high torque step motors, optimized for use with the drive. Three lengths of HT23 are available in single and double shaft configurations: HT23-552, HT23-553 and HT23-554, with holding torque ranging from 84 to 255 ounce-inches. Three lengths of HT34 are also available in single and double shaft configurations: HT34-495, HT34-496 and HT34-497, with holding torque ranging from 550 to 1700 ounce-inches.

For more information on the STAC5 Stepper Drives from Applied Motion Products, click on the link below —

https://www.servo2go.com/product.php?ID=105241&cat

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-02401- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link