Category Archives: Servo Motors

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control Voice coil motor with temperature sensor

 

MotiCont-Logo

Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

Motion Control - Electromate-Logo

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

Motion Control Ventilator Challange

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

Motion Control MIT Ventilator (E-VENT)

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control Voice Coil Actuators Used in Ventilators Available in 4 Weeks from Receipt of Order!

Motion Control – Voice Coil Actuators Used in Ventilators 

To help deal with the COVID-19 pandemic these actuators are available in OEM quantities in 6 to 8 weeks from receipt of order!

motion control Actuator for Medical Ventilators

motion control company -H2W Technologies

When three-phase AC power is applied to the primary, a travelling electromagnetic flux wave is induced and moves relative to the primary. The wave induces an electric current in the conductive reaction plate. The induced electric current interacts with the magnetic flux to produce a linear force. The speed of the motor can be varied by changing the input frequency using an adjustable frequency drive.

 

The actuator utilizes a unique electromagnetic circuit design. This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60 in. [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.  Each actuator is guided by sliding contact bushing assemblies. Voice coil actuators are ideal for applications that require quick, short moves with fast settling times.

 

Features

  • – High Speed
  • – Low-profile
  • – Long bearing life in a high cycle environment
  • – No moving cables
  • – High acceleration
  • – Compact footprint
  • – Custom strokes and force configurations available

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://LinearMotionBlogger.com

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from Servo2Go go to The ORIGINAL: http://MotionControlBuyersGuide.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!

Motion Control Linear Actuator

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators. This clean, compact, voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.

The precision ground 0.1572 (3.993 mm) diameter shaft has an internal thread, and the housing has threaded mounting holes on each end for easy integration into current and future applications. This clean, quiet, efficient, low inertia, brushless actuator featuring an internal shaft and recirculating ball bearing is ideal for: Medical devices, antenna positioning, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser machining and drilling, wafer handling, optical focusing, and dynamic vibration absorption,. The Moticont’s GVCM-051-025-01 linear voice coil motor can also be ordered as a complete plug-and-play system including a position sensor, and controller.

There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

 
For other Motion Control Components, Applications, and Technology from Moticont visit: http://motionshop.net

Motion Control – EC-i 52XL 200W High Torque Brushless Servo Motor from Maxon!

Motion Control – Brushless Motor 

motion control miniature brushless motor

 

Motion Control - Electromate-Logo

The new EC-i 52XL 200W Brushless Servo Motor from maxon is a powerhouse.  When space is limited but high torque and dynamics are required, the maxon EC-i 52XL motor is the ideal motor choice.. 

Vaughan, Ontario, Canada — Motion Control Components — With its extended length (80 ? 110mm), this motor with flux collector rotor provides outstanding torque performance compared to the existing EC-i 52 180W High Torque that is often needed, especially on the industrial automation front.

Its extra power can be even more significant at relatively low speed which makes it a powerful fit to a variety of industrial applications including material handling & transport systems.

Because of its optimized magnet ring, the brushless EC-i 52XL motor with an iron winding offers a very high torque density and a low cogging torque.  The multi-pole internal rotor is extremely dynamic.  Its solid design, with a steel flange and steel housing, makes this motor a robust solution for industrial applications.

Features include:

  • Cost-effective
  • 200 Watt Rated
  • 24, 36 & 48VDC windings
  • 8 pole pairs
  • Optional gearheads, encoders and drive electronics

Order your EC-i drive online now at-

EC-i 52XL 200W Brushless Servo Motor Buy Online

Information on the EC-i 52XL 200W Brushless Servo Motor from maxon can be viewed at:

EC-i 52XL 200W Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – High Torque Rotary Voice Coil Actuators!

Motion Control - H2W High Torque Voice Coil Actuators

 

Motion Control - H2W Logo

Santa Clarita, CA —- Motion Control – H2W Technologies has developed several high torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-015-346-2RC was designed to allow for a low moving mass (68 grams per coil) and inertia, as well as dual independent coils to allow for two independent motion profiles or couple the coils together to double the torque output. This rotary voice coil actuator can generate a continuous torque of 185 in-oz [1.29 N-m] and a peak torque of 555 in-oz [3.88 N-m] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off) in each coil on a 4 inch [102 mm] rotation arm. By coupling the coils together, the continuous torque doubles to 370 in-oz [2.58 N-m] with a peak torque of 1110 in-oz [7.75 N-m] at a 10% duty cycle.

The Motion Control TWR-015-346-2RC has a total angular displacement of 15 degrees [0.26 radians] and a motor constant of 34.4 in-oz/sqrt(watt) [0.24 N-m/sqrt(watt)] per coil or when coupled together the motor constant is 48.5 in-oz/sqrt(watt) [0.34 N-m/sqrt(watt)]. The voice coil motor requires 1.33 amps of continuous current per coil and 4.0 amps of peak current per coil to generate the specified forces. The actuator fits in and envelope of 4.37 in [111.1 mm] x 2.99 in [75.9 mm] x 1.64 in [41.5 mm].

The moving coil design ensures a hysteresis free movement as the coil is wet wound and self-supported, and the non-commutated coil allows for ripple-free motion and no cogging. The voice coil actuator has been designed with mounting provisions in the magnet and coil assemblies. This allows for the integration of a bearing system to maintain the clearances between the coil and permanent magnetic field assemblies. The rotary voice coil actuator is ideal for applications requiring high torque and high-speed applications. Examples of such applications are driving a gimbal axis in scanning applications as well as providing stabilizing torques for image stabilization. More examples of H2W’s Rotary Voice Coils are available on our website: https://www.h2wtech.com/category/rotary-voicecoil-actuators

Technology

Simply stated, a current carrying conductor placed in a magnetic field will have a force (or torque) exerted upon it. This force is proportional to the direction and magnitude of the current and the flux density field. Since the permanent magnet flux density field is fixed, the direction of the rotation depends on the polarity of input current and the amount of torque that is produced is directly proportional to the magnitude of the input current.

Linear Motion Control - H2W High Torque Voice Coil Actuators - Drawing

 

 

 

 

 

 

 

 

 

 

A DC linear servo amplifier is required to provide power to the torquer.

Rotary voice coil actuators are supplied unhoused without bearings.

Coupling the rotary voice coil actuator to your bearing system and a rotary encoder or other feedback device yields a system that is capable of intricate angular position, velocity, and acceleration control.

Low moving inertia of the moving coil assembly allows for high angular acceleration of the payload.

Advantages:

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Zero Cogging
  • Brushless
  • Low Profile

Applications:

  • Aerospace
  • Semiconductor
  • Medical
  • Military

Rotary Voice Coil Motor – is an arc segmented multipole permanent magnet stator with a low inertia copper magnet wire rotor. Angular excursions are typically less than 90º. This torquer is supplied with out a shaft or bearing.

TWR Series Limited Angle Torque Motor

The TWR Series is comprised of a stationary, arc segmented, multipole permanent magnet stator assembly with a low inertia wound wire rotor.

Rotor: The rotor is made up of a single coil of bondable copper magnet wire. The coil is wound and preformed into the desired shape. It is held together with the bonding agents in the wire. It can be encapsulated with aluminum or plastic brackets in order to provide a means for mounting the rotor to the bearing system and payload. The maximum angular excursion is less than 90º.

Stator: The stationary stator assembly consists of multipole permanent magnets that are bonded to steel plates. The 2 opposing steel plates are spaced apart to provide a gap using end plates. The coil rotor assembly moves angularly within this gap. There is no magnetic attractive force between the stator and the rotor.

The TWR Series Torquers are available in 2 configurations.

The low profile (Type L) configuration has a smaller overall height which allows it to fit in a more compact space, but has less angular rotation for a given stator arc segment.

The second configuration (Type S) has a larger overall height but has typically twice the angular rotation per given stator arc segment when compared to the Type L torquer.

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Brushless
  • Low Profile

For Product Descriptions of High Torque Voice Coil Actuators CLICK HERE

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Customer Driven AC Servo Design

motion control servo system

motion control OMRON Logo

Servos – Servo System – The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

To Down Load the 1S Series AC Servo System Catalog CLICK HERE

To view YouTube Video CLICK HERE

For additional on the 1S Series AC Servo System CLICK HERE

To subscribe to OMRON Newsletters CLICK HERE

To contact OMRON about this or other industrial products CLICK HERE

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Motion Control Automation – ElectroCraft EXC-Series 2.3-inch AC Servo Motors!

 

High Voltage. High Performance.

Servo2Go-Logo

Greenville, DE — Motion Control Automation —  – The new EXC-Series 2.3-inch AC Servo Motors, are high voltage, high performance brushless servo motors incorporating the latest electro-magnetic components creating high continuous torques with low inertia for rapid acceleration. They are available with hall-effect commutation or encoder feedback and a variety of connection options.

The Motion Control EXC-Series 2.3-inch AC Servo motor offers customers high economic value and superior reliability in automation applications. The EXC-Series is a cost-improved version of the popular Excalibur family of AC Servo motors sold under the Rockwell Automation brand. This product provides considerable cost improvements for a variety of light industrial, commercial, and medical applications.

The EXC-Series are fast, low vibration BLDC motors. By utilizing M-8 ceramic and rare-earth neodymium magnets, these BLDC motors provide the quick acceleration and consistent speed (up to 15,000 rpm) needed for applications such as centrifuges, fans and pumps. Sealed ball bearings and reduced torque ripple from skewed magnetization also ensure a smooth operation at any speed..

Click on the link below to view the specification on ElectroCraft’s EXC-Series 2.3-inch AC Servo Motors–

http://www.servo2go.com/product.php?ID=105484&cat=

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link

Integrated 400Watt Servo Motor with 12-48VDC Battery Supply Voltage Available from Electromate!

Integrated 400Watt Servo Motor with 12-48VDC Battery Supply Voltage Available from Electromate!

Electromate offers JVL's MAC402 Motor

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — Designed for battery powered and low voltage applications the MAC402 is now available from Electromate The MAC402 is the VDC version of the popular MAC400 400W integrated servo motor. The supply range for the MAC402 is from 12VDC up to 48VDC, and full power of 400W (RMS) up to 1200W (peak) can be reached with 24 to 48VDC. This powerful, compact motor measures just 191mm (7.52 in.) x 60mm (2.36 in) x 114mm (4.49 in.) Applications include but are not limited to: Remotely operated robots, robotic vehicles, portable equipment, tracking devices, antenna mounts, and positioning devices.

MAC402 – The complete 400W solution for medium power ratings with battery supply 12-48VDC.

Peak power up to 1200W.

Choose between models with or without brakes.

IP55 standard. IP66 optional.

Wireless, Industrial Ethernet Connectivity or PLC build in.

JVL offers a 400W continuous (1200W peak) integrated servo motor in the supply range of 24 – 48VDC operating at 0 to 3000 RPM. In many applications it is not necessary to choose a 750W or larger motor as the 400W (1200W peak) motor will be sufficient, thereby reducing cost and saving space. MAC402 options include: Brake, absolute multi turn encoder, and planetary & cycloidal gearheads.

Electromate offers JVL's MAC402 Battery Powered Motor

A wide selection of communication modules is available for MAC402 motors including: Basic modules for Pulse-Direction (or analog input) or fieldbus modules including Profibus, Devicenet and CANopen, or programmable modules with easy connections to local sensors make integration into new and existing applications easy. Moreover, a wide variety of industrial Ethernet options are available: EtherCAT, EtherNet/IP, Profinet, Powerlink, Modbus TCP and Sercos III. With the VDC supply option the advantages of the MAC400 VAC servos have been expanded to include applications for battery and low voltage operation, from 12 to 48 VDC. With wireless options like WLAN/Wifi, Zigbee or Bluetooth, the MAC402 MAC motor® can run completely wireless.

New features:

  • Absolute multiturn encoder without battery
  • Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII2 RS422 channels for encoder in/output and SSI encoder etc.6 I/O for capture of position, interrupt, counters, enable, timer and PLC functions

Expansion module you can choose between:

  • Basic Modules
  • Programmable Modules
  • Field Bus Modules
  • High Speed Multi-Axis Modules
  • Wireless Modules

A big advantage of using an integrated MAC motor® is that there is no need for a separate servo driver/controller. The advantages are: Space savings in the control cabinet, eliminating expensive motor and encoder cables, RFI/EFI noise is minimized due to internal cabling, and connection errors between driver and motor are eliminated. Additionally, service is much easier as the motor and controller are replaced as a single integrated unit minimizing downtime and maximizing production.

CLICK HERE to view more information on the Integrated Servo Motors from JVL Industri Elektronik.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link