Category Archives: Servo Motors (Brushless)

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

Motion Control – 3/4 Inch Diameter Voice Coil Motor Features: High Speed, High Acceleration, and High Force to Size Ratio!

Motion Control – 3/4 Inch Diameter Voice Coil Motor!

 

motion control - voice coil motor


motion control - moticintVan Nuys, CA – Moticont has introduced the GVCM-019-016-02 Linear Voice Coil Actuator (Linear DC Motor).

This small 0.75 in. (19.1 mm) diameter actuator, also called an Electric Cylinder, has a high force to size ratio of 7.4 oz (2.1 N) continuous force and 23.7 oz (4.4 N) of peak force and a stroke length of 0.250 in. (6.4 mm). The housing measures just 0.625 in. long and in the fully extended position the shaft extends 0.436 in. (13.5 mm) beyond the face of the housing.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Control – Miniature Electric Cylinder

motion control - electric cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

motion control - moticint

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control – Linear Actuator Gives Higher Throughput! 

motion control Voice coil motor with temperature sensor

Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy.

motion control - moticont

Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

motion control - moticint

 

Motion Control Voice Coil Actuators Used in Ventilators Available in 4 Weeks from Receipt of Order!

Motion Control – Voice Coil Actuators Used in Ventilators 

To help deal with the COVID-19 pandemic these actuators are available in OEM quantities in 6 to 8 weeks from receipt of order!

motion control Actuator for Medical Ventilators

Santa Clarita, CA – When three-phase AC power is applied to the primary, a travelling electromagnetic flux wave is induced and moves relative to the primary. The wave induces an electric current in the conductive reaction plate. The induced electric current interacts with the magnetic flux to produce a linear force. The speed of the motor can be varied by changing the input frequency using an adjustable frequency drive.

motion control - h2w logo

The actuator utilizes a unique electromagnetic circuit design. This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60 in. [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.  Each actuator is guided by sliding contact bushing assemblies. Voice coil actuators are ideal for applications that require quick, short moves with fast settling times.

 

Features

  • – High Speed
  • – Low-profile
  • – Long bearing life in a high cycle environment
  • – No moving cables
  • – High acceleration
  • – Compact footprint
  • – Custom strokes and force configurations available

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://LinearmotionBlogger.com

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

H2W YouTube Channel

H2W Technologies Blog

motion control- h2w

 

New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from Servo2Go go to The ORIGINAL: http://MotionControlBuyersGuide.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!

Motion Control Linear Actuator

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators. This clean, compact, voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.

The precision ground 0.1572 (3.993 mm) diameter shaft has an internal thread, and the housing has threaded mounting holes on each end for easy integration into current and future applications. This clean, quiet, efficient, low inertia, brushless actuator featuring an internal shaft and recirculating ball bearing is ideal for: Medical devices, antenna positioning, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser machining and drilling, wafer handling, optical focusing, and dynamic vibration absorption,. The Moticont’s GVCM-051-025-01 linear voice coil motor can also be ordered as a complete plug-and-play system including a position sensor, and controller.

There are currently 7 series of Moticont’s GVCM motors based on diameter of the motor, and models based on length of stroke and/or force to select from with additional motors being added to select from. To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

MotiCont-Logo
Visit our Website
Other Products
Videos

 
For other Motion Control Components, Applications, and Technology from Moticont visit: http://motionshop.net

Motion Control – EC-i 52XL 200W High Torque Brushless Servo Motor from Maxon!

Motion Control – Brushless Motor 

motion control miniature brushless motor

 

Motion Control - Electromate-Logo

The new EC-i 52XL 200W Brushless Servo Motor from maxon is a powerhouse.  When space is limited but high torque and dynamics are required, the maxon EC-i 52XL motor is the ideal motor choice.. 

Vaughan, Ontario, Canada — Motion Control Components — With its extended length (80 ? 110mm), this motor with flux collector rotor provides outstanding torque performance compared to the existing EC-i 52 180W High Torque that is often needed, especially on the industrial automation front.

Its extra power can be even more significant at relatively low speed which makes it a powerful fit to a variety of industrial applications including material handling & transport systems.

Because of its optimized magnet ring, the brushless EC-i 52XL motor with an iron winding offers a very high torque density and a low cogging torque.  The multi-pole internal rotor is extremely dynamic.  Its solid design, with a steel flange and steel housing, makes this motor a robust solution for industrial applications.

Features include:

  • Cost-effective
  • 200 Watt Rated
  • 24, 36 & 48VDC windings
  • 8 pole pairs
  • Optional gearheads, encoders and drive electronics

Order your EC-i drive online now at-

EC-i 52XL 200W Brushless Servo Motor Buy Online

Information on the EC-i 52XL 200W Brushless Servo Motor from maxon can be viewed at:

EC-i 52XL 200W Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Match One of These Compact 1.0 Inch Diameter Voice Coil Motors to Your Application’s Stroke Requirements!

 

MotiCont-Logo

Van Nuys, CA – Motion Control Components – Moticont has added to it’s line of Linear Voice Coil Motors, LVCM, two 1.000 in. (25.4 mm) diameter motors. The LVCM-025-022-01 has a stroke length of 0.375 in. (9.5 mm) a mid-stroke length of 1.30 in. (33 mm) and it has a high force to size ratio of 16.9 oz (4.7 N) and a peak force of 53.5 oz. (14.9 N) at 10% duty cycle. The LVCM-025-029-01 has a stroke length of 0.625 in. (15.9 mm) a mid-stroke length of 1.68 in. (43 mm) with a continuous force of 18.2 oz (5.1 N) and a peak force of 57.7 oz. (16.0 N) at 10% duty cycle. These compact, high-force-to-size ratio motors are ideal for: work holding and clamping, medical devices, assembly, testing, laser machining and drilling, wafer handling, optical focusing, dynamic vibration absorption, scanners and laser beam steering and filtering.

These clean, quiet, efficient, low inertia, high acceleration, brushless high speed linear motors have zero cogging and features high accuracy, and high repeatability when operated in a closed loop as a DC servo motor. -Each of these motors features a 10-32 UNC-2B threaded mounting hole in the center of the housing and two 6-32-UNC-2B threaded mounting holes on the coil end to easily add one of these motors to new or existing applications.

Metric series threads are available in production quantities and complete plug-and-play systems including an encoder and controller are also available.

Is there a need for a smaller or larger diameter motor, one with longer travel, or more force? There are 12 series of Moticont’s LVCM series motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


MotiCont-Logo
Visit our Website
Other Products
Videos

 

 


Motion Control – High Torque Rotary Voice Coil Actuators!

Motion Control - H2W High Torque Voice Coil Actuators

 

Motion Control - H2W Logo

Santa Clarita, CA —- Motion Control – H2W Technologies has developed several high torque rotary voice coil actuators, otherwise known as a limited angle torque motors or LATs. The model TWR-015-346-2RC was designed to allow for a low moving mass (68 grams per coil) and inertia, as well as dual independent coils to allow for two independent motion profiles or couple the coils together to double the torque output. This rotary voice coil actuator can generate a continuous torque of 185 in-oz [1.29 N-m] and a peak torque of 555 in-oz [3.88 N-m] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off) in each coil on a 4 inch [102 mm] rotation arm. By coupling the coils together, the continuous torque doubles to 370 in-oz [2.58 N-m] with a peak torque of 1110 in-oz [7.75 N-m] at a 10% duty cycle.

The Motion Control TWR-015-346-2RC has a total angular displacement of 15 degrees [0.26 radians] and a motor constant of 34.4 in-oz/sqrt(watt) [0.24 N-m/sqrt(watt)] per coil or when coupled together the motor constant is 48.5 in-oz/sqrt(watt) [0.34 N-m/sqrt(watt)]. The voice coil motor requires 1.33 amps of continuous current per coil and 4.0 amps of peak current per coil to generate the specified forces. The actuator fits in and envelope of 4.37 in [111.1 mm] x 2.99 in [75.9 mm] x 1.64 in [41.5 mm].

The moving coil design ensures a hysteresis free movement as the coil is wet wound and self-supported, and the non-commutated coil allows for ripple-free motion and no cogging. The voice coil actuator has been designed with mounting provisions in the magnet and coil assemblies. This allows for the integration of a bearing system to maintain the clearances between the coil and permanent magnetic field assemblies. The rotary voice coil actuator is ideal for applications requiring high torque and high-speed applications. Examples of such applications are driving a gimbal axis in scanning applications as well as providing stabilizing torques for image stabilization. More examples of H2W’s Rotary Voice Coils are available on our website: https://www.h2wtech.com/category/rotary-voicecoil-actuators

Technology

Simply stated, a current carrying conductor placed in a magnetic field will have a force (or torque) exerted upon it. This force is proportional to the direction and magnitude of the current and the flux density field. Since the permanent magnet flux density field is fixed, the direction of the rotation depends on the polarity of input current and the amount of torque that is produced is directly proportional to the magnitude of the input current.

Linear Motion Control - H2W High Torque Voice Coil Actuators - Drawing

 

 

 

 

 

 

 

 

 

 

A DC linear servo amplifier is required to provide power to the torquer.

Rotary voice coil actuators are supplied unhoused without bearings.

Coupling the rotary voice coil actuator to your bearing system and a rotary encoder or other feedback device yields a system that is capable of intricate angular position, velocity, and acceleration control.

Low moving inertia of the moving coil assembly allows for high angular acceleration of the payload.

Advantages:

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Zero Cogging
  • Brushless
  • Low Profile

Applications:

  • Aerospace
  • Semiconductor
  • Medical
  • Military

Rotary Voice Coil Motor – is an arc segmented multipole permanent magnet stator with a low inertia copper magnet wire rotor. Angular excursions are typically less than 90º. This torquer is supplied with out a shaft or bearing.

TWR Series Limited Angle Torque Motor

The TWR Series is comprised of a stationary, arc segmented, multipole permanent magnet stator assembly with a low inertia wound wire rotor.

Rotor: The rotor is made up of a single coil of bondable copper magnet wire. The coil is wound and preformed into the desired shape. It is held together with the bonding agents in the wire. It can be encapsulated with aluminum or plastic brackets in order to provide a means for mounting the rotor to the bearing system and payload. The maximum angular excursion is less than 90º.

Stator: The stationary stator assembly consists of multipole permanent magnets that are bonded to steel plates. The 2 opposing steel plates are spaced apart to provide a gap using end plates. The coil rotor assembly moves angularly within this gap. There is no magnetic attractive force between the stator and the rotor.

The TWR Series Torquers are available in 2 configurations.

The low profile (Type L) configuration has a smaller overall height which allows it to fit in a more compact space, but has less angular rotation for a given stator arc segment.

The second configuration (Type S) has a larger overall height but has typically twice the angular rotation per given stator arc segment when compared to the Type L torquer.

  • No Torque Ripple
  • High Angular Acceleration
  • No Commutation
  • Brushless
  • Low Profile

For Product Descriptions of High Torque Voice Coil Actuators CLICK HERE

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control Automation – ElectroCraft EXC-Series 2.3-inch AC Servo Motors!

 

High Voltage. High Performance.

Servo2Go-Logo

Greenville, DE — Motion Control Automation —  – The new EXC-Series 2.3-inch AC Servo Motors, are high voltage, high performance brushless servo motors incorporating the latest electro-magnetic components creating high continuous torques with low inertia for rapid acceleration. They are available with hall-effect commutation or encoder feedback and a variety of connection options.

The Motion Control EXC-Series 2.3-inch AC Servo motor offers customers high economic value and superior reliability in automation applications. The EXC-Series is a cost-improved version of the popular Excalibur family of AC Servo motors sold under the Rockwell Automation brand. This product provides considerable cost improvements for a variety of light industrial, commercial, and medical applications.

The EXC-Series are fast, low vibration BLDC motors. By utilizing M-8 ceramic and rare-earth neodymium magnets, these BLDC motors provide the quick acceleration and consistent speed (up to 15,000 rpm) needed for applications such as centrifuges, fans and pumps. Sealed ball bearings and reduced torque ripple from skewed magnetization also ensure a smooth operation at any speed..

Click on the link below to view the specification on ElectroCraft’s EXC-Series 2.3-inch AC Servo Motors–

http://www.servo2go.com/product.php?ID=105484&cat=

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link

Automation Motion Control – MAXON Says, “Customize Your Drive System Online!”

Maxon motion control X-Drives Configure online

 

 

 

 

 

Automation Motion Control – Maxon motors introduces a NEW product line of innovative brushed DC motors, planetary gearheads and encoders. customers will find the new motors available for easy online configuration in the online shop. Within 11 working days, the finished drives are ready for shipment. Profit from these fast delivery times now!.

Maxon Logo

Fall River, MA — Maxon motor is introducing new high-speed drives for you to configure. The brushless ECX motors with diameters of 8, 16 and 19 mm achieve peak values of 120,000 rpm, run very smoothly and develop hardly any heat. They are available with different power stages and in standard or sterilizable versions (up to 2000 autoclave cycles). That makes the drives an attractive option for hand-held surgical tools as well as industrial spindles.

Configurable drives: dynamic, high power, and low noise

Configure and combine the DC motor (DCX, DC-max) or BLDC motor (ECX SPEED) and planetary gearhead (GPX) and sensor (ENX) according to your individual requirements, easily and online. After only 11 working days, the drive systems are ready for shipment from Switzerland. Detailed product data can be viewed online immediately and 3D data for the configuration is available for download. Discover the world of maxon X drives!

maxon X drives program

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

High power density, high efficiency, smooth running and available for online configuration.Configure sizes from Ø 10 – 35 mm. Choose between precious metal or graphite brushes, ball or sintered bearings, and much more.

 

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

The DC motors with the best price/performance ratio can be configured online. Configure Ø 16 and 22 mm sizes. Choose between graphite and precious metal brushes, sintered and ball bearings, and many other components.

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Super-fast, configurable brushless DC motors. The brushless ECX series of motors has been optimized for high speeds (up to 120,000 rpm) and withstands up to 2000 autoclave cycles

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Configurable planetary gearheads for high torques in the smallest of spaces. Maxon GPX gearheads are low-noise and low-backlash. Ideal for when high torques and speeds are needed.

 

 

Maxon motion control X-Drives Configure online

 

 

 

 

 

 

Configurable digital encoders. 3-channel encoders with inverse signals for interference free function. The counts per turn may be easily programmed at production.

 

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Portescap’s Ultra ECTM Brushless Mini Motor Platform Wins 2016 Golden Mousetrap Award from Design News Magazine!

Portescap wins Motion Control 2016 Gold Mouse Trap Award

Portescap Logo

 

West Chester, PA — Automation – Motion Control — Portescap’s Ultra EC™ Brushless DC Mini Motors have been recognized with a Golden Mousetrap Award in the Automation and Control: Motors and Mechanical Motion category. The annual awards are sponsored by Design News to recognize and celebrate the companies, products and people energizing North American design, engineering and manufacturing. Winners were announced at the Golden Mousetraps Awards ceremony on February 9, 2016 at the Anaheim Marriott.

Portescap’s Ultra EC platform is comprised of three product lines that address specific application performance requirements for high speed, high torque or a delicate balance of both. All Ultra EC motors utilize Portescap’s patented U coil design. This innovative coil technology allows two-pole motors to deliver 30% more torque (compared to the same size motor with a conventional coil design) and substantially reduces lower iron losses, allowing for greater efficiency and cooler operation.

Ultra EC Brushless DC Mini Motors:

  • Ultra ECS – ultra high speed and responsiveness for direct drive applications
  • Ultra ECT – ultra high torque in the smallest package
  • Ultra ECP – ultra high performance for a wide range of application

Portescap offers the broadest miniature and specialty motor products in the industry, encompassing coreless brush DC, brushless DC, stepper can stack,digital linear actuators, and disc magnet technologies.  Portescap products have been serving diverse motion control needs in wide spectrum of medical and industrial applications – medical, life science, instrumentation, automation, aerospace and commercial applications, for more than 70 years.

Portescap has manufacturing centers in the United States, St. Kitts, and India, and utilizes a Global Product Development network with research and development centers in the United States, China, India, and Switzerland.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website atwww.portescap.com.

 

Portescap Logo

 

Automation Motion Control- Maxon’s Highly Dynamic Brushless DC Motors!

Motion Control – Maxon’s Highly Dynamic Brushless DC Motors!

Maxon brushless motors are compact yet powerful

Maxon motion control EC-i 40 compact powerful motors

Maxon Logo

Fall River, MA — Automation Motion Control – In automation and robotics, many applications are characterized by high energy and high torque at the same time. Spatial restrictions also mean that drives must be short, have a long service life and be maintenance-free. The newly redesigned EC-i motors from maxon motors offer solutions that fit these requirements perfectly.

These brushless DC motors have several key advantages: low inertia, minimal detent, robust bearings and compact construction. The use of high-powered permanent magnets ensures high power density, providing great speed stability under load.

Maxon motion control EC-i 40 compact powerful brushless motors

These motors are available in 40 mm diameter and in two lengths, namely 26 mm (50 Watt) and 36 mm (70 Watt). The modular system with gearheads, encoders and controllers from the maxon delivery program offers a large number of possible combinations.

EC-i motors are ideally suited for applications that require maximum drive in a minimum space. Typical areas of application are robotics, industrial automation and security technology.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Motion Control – LOW COST, HIGH PERFORMANCE BRUSH AND BRUSHLESS SERVO MOTORS DESIGNED FOR LOW TORQUE RIPPLE


Trust Automation Servo Motors

Trust Automation Motion Control

San Luis Obispo, CA – Trust Automation, Inc. has introduced a new series of motion control brushed servos and two series of brushless servos that can lower the cost of new or existing applications, and improve the performance of an existing application. The integration into an existing application is easy as each motor has been designed as a, “Drop-in-Replacement.“ Additionally, each series of servo motors has been engineered to reduce torque ripple for smooth operation. Integral encoder, brake, and tachometer options make these brushed and brushless servos ideal for: Robotics, machine tools, medical equipment, assembly, and packaging applications.

Matching the right servo is easy. The SE500 series consists of eight brushed servos from 23 Watts up to 500 Watts. These motors have been designed for high performance. For example, the 5000 rpm SE540-0200 motor is rated at 200 Watts, 3.3 A continuous, and 25 A peak for greater throughput.

The SE600 series of eight low inertia brushless servos features servo motors that go from 30 Watts up to 1500 Watts and the SE700 series of twelve medium inertia brushless servos go from 50 Watts to 7000 Watts. Standard on SE600 and SE700 servos is differential Hall signals U, V, and W. Torque ripple on these 10 pole servos is only 0.3 % of rated torque.

Brushed Motors, SE500 series, come standard with 1000 line differential encoders, and Brushless Motors, SE600 and SE700 series, come standard with 2000 line differential encoders. Optional 500, 1000, 2000, and 2500 line differential encoders with A, B & Index (for brushed and brushless) are available as special order. A standard 24 Volt DC and optional 90 Volt DC fail-safe brake is available for brushed and brushless motors. Brushed motors have optional tachometers (for 110 watts and above). Oil seals are standard on all models and matching servo amplifiers are available.

Trust Automation, Inc. has focused on developing and manufacturing the highest performance servo products in the motion control market. Our innovative products address the increasing demand for higher performance and simpler machine integration.

Trust Automation’s motion control products include: Stand-alone motion and machine controllers, SynqNet I/O and SynqNet Drives, Brushed and Brushless Rotary Motors, Interconnect Products and Automation Engineering consulting covering Mechanical, Electrical, Software and System aspects of machine design.

Since 1990 Trust Automation has provided Smart Solutions in Motion Control and Affordable Customization of motion related products.

For additional information contact David Rennie at Trust Automation, 143 Suburban Road, Bldg 100, San Luis Obispo, CA 93401; Tel: 805-544-0761, Fax: 805-544-4621, E-Mail: info@trustautomation.com or visit the Web site at http://www.trustautomation.com