Category Archives: Stage – Rotary

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems

motion control - stepper motor controller


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

Motion Control – Miniature Size, High Precision, Hollow Core, 39 mm Diameter Rotary Stage from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Miniature Hollow Core Rotary Stage

motion control - rotary table


motion control - OESVan Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced a high precision, low profile, miniature size rotary table, the AR39-AH. This high precision miniature size rotary stage is just 35 mm (1.378 in.) high and the footprint including the standard 2-phase 1.8 degree stepper motor is only 58 mm (2.283 in) by 100.5 mm (3.957 in ). The table has a precision pattern of 6 8-M2x4L threaded mounting holes in the rotary table for fixtures or tooling, and an 8 mm (0.315 in) diameter through hole. Countersunk holes in the base allow for easy unobstructed integration into new and existing applications. The diameter of the AR39-AH Miniature Rotary Table is 39 mm (1.535 in.) and range of travel is a full 360 degrees of continuous rotation.

Motion Control – Optimal Engineering Systems, Inc. (OES) Introduces New, Motorized, High Resolution Pan-Tilt Stages!

Motion Control – Pan-Tilt Stage
motion control pan tilt stage

Van Nuys, CA – — Motion Control – High Resolution, Motorized, Pan-Tilt Stages have been added to the extensive line of OES (Optimal Engineering Systems, Inc.) motion control products. These motorized Pan-Tilt Stages are available in two sizes. The PT60-1 Pan-Tilt Stage is a combination of two 60 mm (2.362 in.) rotary stages and the PT100-1 is a combination of two 100 mm (3.937 in.) rotary stages, set at a 90O angle to each other. The rotary stages of each Pan-Tilt stage features a high repeatability of 0.005O (18 arc-sec), a positional accuracy of 0.005O (18 arc-sec), and a resolution of 0.001O = 3.6” (10 Micro-steps per Step Motor Driver in use).

motion control - oes

These Pan (horizontal table)-Tilt (vertical table) Stages are deal for: Scanning, testing, inspection, assembly, positioning, laser and micro machining, pointing optics and cameras, and other applications.

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control –  XYZ Axis Stages to Suit  Specific Applications!

motion control - custom stages
motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

Motion Control – Precisely Measure Curvature and Angles with New Dual-axis Pitch and Roll Stages!

Motion Control – Dual-axis Pitch and Roll Stages!

motion control | Pitch-and-Roll Stage

OES Logo

Van Nuys, CA – Motion Control – The precise measurements of angles and the curvature of objects are easily determined using two new Pitch and Roll stages just introduced by OES (Optimal Engineering Systems, Inc.). The PR100-45-01 (pictured) is driven by stepper motors and the PR100-45-02 is driven by brushless servo motors with quadrature incremental optical encoders.

The Pitch axis (lower stage) is a high precision goniometer stage which features preloaded cross roller guides and a high ratio worm drive for smooth motion over a range of travel of +/- 45 degrees. It has a typical accuracy of 0.05 degrees and repeatability of +/- 0.01 degrees. Additionally, this axis has end-of-travel limit switches.

The 100 mm diameter Roll axis (upper stage) has a 180:1 gear ratio for smooth motion and has a precise pattern of threaded holes for fixtures or tooling. This axis has an accuracy of 0.05 degrees and repeatability of +/-  0.01 degrees. The Roll axis has a Home signal for initialization. Each axis features a calibrated scale to visually display the angle. The maximum speed with stepper motors is 14 degrees/second and 45 degrees/second with servo motors.  The knobs of the stepper motors can be replaced with optional optical encoders for position verification.

The resolution of the PR100-45-01 stepper motor driven duel-axis stage depends on the resolution of the step motor driver resolution or the optical encoder if a servo motor is used. A resolution of 0.001 degrees equivalent to 3.6 arc-sec can be achieved using a10 micro-steps per step stepper motor driver or an encoder with a resolution of 500 cycles per revolution.

The PR100-45-02 that features servo motors and optical quadrature encoders are used for very precise closed loop operation and greater speeds. The PR100-45-01 and -02 stages can be ordered plug-and-play with a fully a compatible multi-axis motion controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – High Precision, Low Profile, Compact 100 mm Motorized Rotary Stage Available from OES!

motion control OES Rotary Stage

 

OES Logo

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) now offers a high precision, low profile, compact motorized rotary stage, the AY110-100-SC. This precision stage is just 1.772 in. (45 mm) high and the foot print is only 4.764 in. by 6.693 in. (121 mm by 170 mm). The stage has a pattern of threaded mounting holes in the rotary table and holes in the base for easy integration into new and existing applications. The diameter of the table is 3.937 in. (100 mm) and the range of travel of the AY110-100-SC Rotary Stage is a full 360o and it is capable of continuous rotation. The table is driven by a 180:1 worm gear at up to 14o per second and has a resolution of 0.0001o with a 10 micro-step per step stepper motor driver. The stage is also available with a servo motor and optical encoder. When configured with the standard stepper motor there is a knob for manual adjustment which can be replaced with an optical encoder for precision position verification

The low cost, low profile AY110-100-SC rotary stage features a parallelism of 80 microns, a backlash of 0.0005o, surface roundness of 15 microns, positional accuracy of 0.001o, and a transmission deviation of 5 microns making it ideal for: Microscopy, laser positioning and machining, inspection, assembly, testing, and other critical applications. This black anodized stage has a load capacity of 99 lbs (45Kg) and there is an indicator scale for visual sighting of the angle of rotation. The stage can be ordered plug-and-play with a fully compatible controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – XY-Theta Alignment Stage Featuring High Resolution and High Repeatability Is Available from OES!

OES Motorized XY Theta Alignment Stage

 

OES Logo

Van Nuys, CA – — Motion Control Components – Alignment Stage – The XYR-03-01 Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY-Theta stage for such applications as: Angular glass cutting and grinding, wafer alignment, semiconductor handling, laser cutting and drilling. The linear resolution of the X and Y axis is 5µ (non-micro-step) or 0.125µ (20 micro-steps per step motor driver in use), the repeatability is 1.5µ, and positional accuracy is 5µ. The 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings add to the high precision and stiffness of the XYR-03-01 alignment stage. The linear travel of the X and Y axes is 50 mm x 50 mm.

The 100 mm diameter theta stage is driven by a precision 90:1 ratio worm gear. The resolution of the theta stage is 0.02O (non Micro-step) or 0.001O (20 Micro-steps per step motor driver in use). Repeatability is 0.005O, positional Accuracy is 0.01O and backlash is 0.005O.

Two-phase stepper motors are standard. The knob for manual adjustments of each axis can be replaced with an incremental encoder for position verification or closed loop operation. These black anodized Aluminum XY-Theta stages are easy to integrate into new or existing systems. Compatible Motion Controllers are available from OES and the XYR-03-01 Alignment Stage can also be ordered as a complete plug-and-play system.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Linear Motion Control – Six-Axis Linear and Rotary Positioning Stage!

H2W Technologies Six Axis Linear Motion Rotary Positioning Stage

Linear motion H2W Logo

Santa Clarita, CA —– Linear Motion Control – The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane.

Each linear axis uses a H2W brushless linear motor BLDM-D06 to generate a continuous/peak force of 24.8 lbs [110 N]/74.5 lbs [331 N] with each moving table capable of a total stroke length of 82 in [2083 mm]. Each linear axis has an independent non-contact 1.0-micron resolution encoder head reading a single encoder scale allowing for precise positioning using any multi-axis motion controller. Each moving table is guided by a rigid recirculating ball linear bearing block sharing a single linear bearing rail.

Each rotary axis consists of a standard 34-frame rotary stepper motor with a 40,000 counts/rev resolution encoder. Using a state-of-the-art motion control electronics package provided by H2W, each rotary stepper motor can operate as a 2-phase rotary brushless motor. Each motor can generate a continuous torque of 27.1 oz-in [3.06 N-m]. Each rotary axis is removable, which, in turn, reduces the moving weight of the linear axis to which it was mounted. This allows for larger payloads on each linear axis.

The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. It has end-of-travel rubber bumper stops, a home positioning sensor, end-of-travel-sensors, and custom mounting holes are available upon request. There are also provisions that allow customer cables to be routed within the cable carriers.

Features:

  • Multiple linear motors on single magnet track Combined linear and rotary displacement
  • Rotary axis is capable of full 360-degree rotation
  • Ability to run closed loop rotary stepper motors
  • Rotary axis can be easily removed
  • Six axis of coordinated motion
  • Assembled on a single piece of aluminum extrusion
  • Cable carriers to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

See Article: https://www.h2wtech.com/article/six-axis-linear-and-rotary-positioning-stage

See Video at Youtube: https://youtu.be/cfnl7wxrLCs

See Product: https://www.h2wtech.com/page/six-axis-linear-and-rotary-positioning-stage

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Yaw, Tilt, Rotary Stages from Intellidrives!

Intellidrives Motion Control Component - Rotary Table

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – The integrated two-axes rotary assembly provides high-speed micro-machining capabilities for complex 3D part geometries and for general testing, purpose pointing, scanning and tracking applications for small optics, antennae and other sensors. The precision-aligned system allows accurate positioning on a hemispherical surface.

System is equipped with high performance rotary stages and offer excellent stiffness and load capacity making them suitable for a wide variety of applications and motorized with high torque NEMA 17 stepper motors.

Optionally, can be equipped with rotary encoders mounted to the back of the stepper motor to provide closed loop servo performance with IntelLiDrives ServoStep controllers.

Features:

  • Precision worm gear technology
  • Positioning accuracy 30 arc-sec
  • Repeatability 10 arc-sec
  • Max speed 60 rpm
  • Yaw rotation 360 deg
  • Tilt rotation +/- 95 deg
  • Load 5 Kg

tilt

(A axis)

yaw

(B axis)

mechanism

geared rotary stage

geared rotary srage

max speed

30rpm

60 rpm

rotation

320°

n*360°

accuracy

 30 arc-sec

 30 arc-sec

repeatability

 10 arc-sec

run-outs

20 microns

load weight

 3 Kg

Intellidrives Motion Control Component - Rotary Table

 

FOR ADDITIONAL INFORMATION – CLICK HERE

About IntelLiDrives —

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – Linear-XY-Rotary Combination Stages from Intellidrives!

Intellidrives Motion Control Component - XY Rotary Stages

Motion Control Components - Intellidrives-Logo

 

 

 

 

 

 

 

 

 

 

Philadelphia, PA, — Motion Control Components and Systems – The Linear XY and Rotary Combination stages are compact, high-performance linear positioning and Rotary stages are perfect for the confines of the laboratory while providing the high reliability required in a production environment.

Features:

  • Low 42 mm height actuators
  • Stroke 100 mm to 600 mm
  • Precision ball bearings
  • Motorized Rotary stage
  • Compact multi-axes configuration
  • Stepper, Servo, SMART motors

Intellidrives Motion Control Component - XY Rotary Stages Composite Photo

They are the ideal choice for measurement, testing, accurate alignment and component assembly.

The precision ball-screw provides accuracy, repeatability and positioning resolution capability to 1 micron.

The linear ball bearings provide smooth travel and excellent payload characteristics

The RTLA-30-100 rotary stages incorporate a precision worm-gear drive mechanism and bearing components for accurate positioning performance over the lifetime of the product.

Compact in size, with only 100×100 mm footprint, RTLA-30-100 has center aperture 30 mm and low profile 45 mm. Choices of worm gear ratios 180:1, 90:1, 45:1 are available to achieve range of rotation speeds and translated resolution of 1.8 arc-sec.

Stages can be fitted with stepper motor, brush-less servo motor with rotary encoder or integrated SMART motors.

Links to Specific Series of Linear XY Rotary Combination Stages:

XYR-BSMA-LY-110-50×50+RTLA-0-60 … XY stroke 50×50 mm

XYR-BSMA-LY-110-75×75+RTLA-0-60 … XY stroke 75×75 mm

XYR-BSMA-LY-110-75×75+RTLA-30-100 … XY stroke 75×75 mm

XYR-BSMA-LY-110H-30×30+RTLA-0-60 … XY stroke 30×30 mm

XYR-BSMA-LY-140H-100×100+RTLA-30-100 … XY stroke 100×100 mm

XYR-BSMA-LY-140H-200×200+RTLA-30-100 … XY stroke 200×200 mm

XYR-BSMA-LY-140H-300×300+RTLA-30-100 … XY stroke 300×300 mm

XYR-GA-BSMA-LY-140H-300×300-RTLA-30-100 … XY stroke 300×300 mm

XYR-GA-BSMA-LY-140H-300×300-RTLA-60-150 … XY stroke 300×300 mm

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – Precision 30 mm Clear Aperture Vertical Rotation Stage from OES!

Motion Control - OES AR59 vertical stage

OES Logo

Van Nuys, CA – — Motion Control – The precision AR59-AV Motorized, 30 mm Clear Aperture Vertical Rotation Stage from Optimal Engineering Systems, Inc. (OES) features a 180:1 precision worm drive and deep grove ball bearings for a high resolution of ± 0.001O when microstepping (10 micro steps-per-step). The parallelism of the table is less than 50µm. The AR59-AV vertical rotation stage is ideal for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining or scribing, electronic assembly, testing, and photonics

The clear aperture of the AR59-AV vertical rotation stage allows for vacuum and / or electrical lines, as well as optics. A knob on the motor shaft allows for manual positioning. This knob may be replaced with an optical encoder for position verification. This compact black anodized vertical rotation stage with a full 360O of rotation and 30 mm (1.181 inches) clear aperture measures just 116.5 mm (4.587 inches) long x 80 mm (3.150 inches) high and the base is 60 mm (2.362 inches) x 60 mm (2.362 inches) for stability with 4 countersunk mounting holes for easy integration into new and existing applications. The 59 mm (1.181 inches) dia. table has 8 drilled and tapped (8-M3x6l) mounting holes for easy mounting of tooling, supports loads to 1 Kg 2.2 lb), and has scale to clearly display the angle of rotation. Compatible with OES’s line of motion controllers, the AR59-AV vertical rotation stage is available as a Plug-and-Play system or with an optical encoder for position verification. A larger vertical rotation stage and standard horizontal rotary stages are also available.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

WATER-TIGHT and DUST-PROOF ROTARY SERVO TABLES (DDR) from Intellidrives!

INTELLIDRIVES’s Direct drive rotary servo tables feature IP rated ingress protection.

Intellidrives Motion Control Component - IP Rated Rotary Table

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos
Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – IP RATING – Direct drive rotary servo tables feature IP rated ingress protection. IP rating assures against ingress of water and external particles. IP65 rating assures against ingress of dust and small water jets. IP66 rating assures, in addition to IP65, against ingress of powerful water jets. IP67 rating assures, in addition to IP66, against water penetration under heavy water jets and when partially submerged.

Intellidrives Motion Control Component - IP Rated Rotary Servo Table

 

DIRECT DRIVE TECHNOLOGY – DIRECT DRIVE rotary tables provide superior angular positioning and are designed to eliminate backlash, friction and wear problems associated with worm, gear and belt drives. Low maintenance and high throughput characteristics of the DDR stages yields the lowest total cost of ownership. INTELLIGENT ACTUATORS can easily “talk over” USB 2.0, Ethenet, RS232, RS485 interfaces and come with powerful yet easy to use software packages. for system start-up and integration, like communication drivers, linkable DLL libraries, National Instruments Labview drivers and VI examples, GUI and easy-to-use DXF conversion software.

These rotary tables utilizes direct drive three phase brushless motor technology. There are no brushes to replace and no gear trains or belts to maintain.

ABSOLUTE ENCODER – Accurate Positioning performance is assured with precision ABSOLUTE encoder that provides arc-sec positioning resolution. The motor and rotary encoders are directly coupled to eliminate coupling backlash.

Absolute encoder keeps track of its position at all times, and provides it as soon as power is applied. This feature is particularly useful in applications where the equipment has power turned off between uses. No need to move to home sensor or index pulse to establish a reference position.

FOR ADDITIONAL INFORMATION – CLICK HERE

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – Intellidrives Offers Direct Drive Rotary Stage!

ACR-32UT has a very wide dynamic speed range and can move at sub-rpm speed with low velocity ripple and can accelerate quickly to 1,500 rpm.

Intellidrives Motion Control Component - Rotary Table

Motion Control Components - Intellidrives-Logo
Visit our Website

 

Philadelphia, PA, — Motion Control Components and Systems – The ACR-32UT precision rotation stage is a low profile rotary table with a high-speed direct-drive rotary servo motor. The 32 mm center aperture and lightweight construction makes this rotary stage an ideal choice for handling 300 mm silicon wafers for semiconductor processing

ACR-32UT has a very wide dynamic speed range and can move at sub-rpm speed with low velocity ripple and can accelerate quickly to 1,500 rpm. This stage can be easily installed into IntelLiDrives low profile open frame XY tables with a minimal stack-up height to minimize Abbe error.

These features make the ACR-32UT outperform the stability, acceleration and settling speed of traditional servo motor gear-driven mechanisms, according to the company. IntelLiDrives offers a wide range of servo amplifiers and advanced controllers to provide a complete, integrated package.

System Performance Unit ACR-32UT
Center aperture mm 32
Outside diameter mm 116
Stage height mm 22
Peak Torque Tp

 (Nm)

15
Continuous torque

air cooling, coil 120°C

Tc120

(Nm)

5
Peak current at Tp Amp p rrms 15
Continuous current at Tc Amp c rrms 4
Recommended voltage (note 1) Uvdc

Uvac

310

220

Max speed  

(note 2, 3)

RPM 1,400
Positioning resolution

(note 3)

counts/rev

 

3,600,000 (standard)

7,200,000

(optional)

Positioning resolution (arc-sec) 0.60
Accuracy Arc-sec <10
Repeatability Arc-sec <1
Run-out axial/radial micron <10
Rotor Inertia kg x m2 0.05
Stage weight M (Kg) 3

>

Axial load M (Kg) 10

 

Note 1: Rotary table can operate at lower voltages with lower speeds

Note 2: Max speed shown with no external torque applied

Note 3: Max speed may be limited by controller’s encoder frequency input.

            Sin/cos 1 Vpp and other encoder resolutions available.

            Contact the factory.

Intellidrives Motion Control Component - Rotary Table

 

 

For additional information CLICK HERE!

For Youtube video CLICK HERE!

To request additional information CLICK HERE!

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

 

Motion Control Components – ServoBelt Rotary Stages are Available from Electromate!

ServoBelt Rotary Stage Family from Bell Everman is Available from Electromate!

Electromate offers Bell Everman Motion Control Rotary Stages

Motion Control - Electromate-Logo

Vaughan, Ontario, Canada — Motion Control — ServoBelt Rotary Stages from Bell Everman are compact, high-torque rotary stages that offer through hole size and speed comparable to direct-drive rotary tables costing thousands more.

Features include:

  • Room in the Middle. ServoBelt Rotary stages offer two different through hole configurations. Available with 50-, 100- or 200-mm center openings, our large through hole stages accommodate large bundles of power, signal and pnuematic conductors. They also make it easy to integrate laser and optical systems. Standard-sized models with 16- or 25-mm through holes offer a more economical choice when fewer utilities need to pass through the center of the stage.
  • Direct Drive Performance. Designed for NEMA 23 and 34 motors, the ServoBelt rotary stages offer speeds up to 1,000 rpm, continuous torque to 6.6 N-m and resolution down to 0.16 arc-sec with Renishaw ring encoders or tape scales for partial rotation.
  • Application Flexibility. ServoBelt Rotary stages support both continuous rotation and variable indexing applications
  • Robust, Lubed-for-Life Bearings. ServoBelt Rotary stages incorporate large full duplex, angular contact bearings, imparting moment and load capacities far in excess of its usual application requirements. This excess load capacity translates into virtually limitless bearing life.
  • Cost Effective. ServoBelt Rotary stages offer an economical solution for a variety of medium-duty rotary motion jobs such as driving carousel tables on packaging and assembly machines and providing fourth-axis rotary motion for laser cutting and mini CNC machines.

CLICK HERE to view the Bell Everman ServoBelt Rotary Stages Brochure

CLICK HERE to view all of the Bell Everman Motion Control Components available from Electromate

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.comor visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – 100 mm Hollow Shaft Rotary Actuator from Intellidrives!

Intellidrives Motion Control Hollow Shaft Rotary Actuators

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – RTGA Series motorized rotation stages provide precision angular positioning accuracy combined with high load capacity. There are three stage sizes with center aperture from 32 mm to 100 mm available, optimizing load capacity, torque, speed and resolution for a variety of operating conditions. Cross-roller bearings allow for offcenter loads in a reduced footprint. The single monolithic design offers improved stiffness without compromising dynamic performance. Precise rotation is ensured by gear/pinion mechanism. RTGA stages are driven by the open loop stepper motors or closed loop servo-step motor with programmable resolutions to provide sub arc-sec angular resolution.

 

 

PARAMETER / MODEL

 

 

Unit

 

RTGA-85-33

 

RTGA-130-62

 

RTGA-200-100

Hollow shaft mm 33 62 100
Table diameter mm 85 130 200
Gear ratio (motor/table)
– 18:1 –
Max torque Nm 2.5 12 50
Max speed rpm
– 40 –
Repeatability (Unidirectional) arc-sec
– 20 –
Reversal Value (Hysteresis) arc-min
– 3 –
Angular accuracy arc-min
– 4 –
Axis load kg 50 100 200
Off-center moment load Nm 10 50 100
Axial run-out microns
– 20 –
Parallelism microns
– 30 –
Stage weight kg 1.5 3 10
Motor
– Stepper motor with encoder option
Closed loop ServoStep –
Resolution arc-sec
– 5 (with encoder option) –

 

Intellidrives Motion Control Hollow Shaft Rotary Actuators-Drawing

 

 

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives atsales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

 

Motion Control Components - Intellidrives-Logo
Visit our Website