Category Archives: Stage – Vertical Lift

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control –  XYZ Axis Stages to Suit  Specific Applications!

motion control - custom stages
motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!

Motion Control – Elevator Stages
motion control elevator stage

 

OES Logo

Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively.

The vertical motion of each Z-Axis Stage is driven by an 8 mm diameter ball screw with a 1 mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns makes these two Z-Axis Stages ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Each stage has a 90 x 90 mm (3.543 in. x 3.543 in.) table with threaded holes for fixtures or tooling. Additionally each stage features a dynamic straightness of 5 microns and dynamic parallelism of 30 microns. The maximum z-axis travel speed is 5 mm/sec (0.196 in/sec) and load capacity is 5 kg. (11.0 lbs)

The AZV9010 and AZV9020 Z-Axis Stages are constructed of black-anodized aluminum alloy and weighs just 1.85 kg (4.978 lbs), and 1.95 kg (4.299 lbs). Each stage has a knob for manual adjustment, and the stages can be supplied plug-and-play with a motion controller.

 

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering-Systems) featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

 

 

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Linear-XYZ-Rotary Combination Stages from Intellidrives!

Intellidrives 4 Axis XYZ-Rotary System

 

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – Intellidrives’ compact, high precision XYZ-Rotary stage is a combination of Intellidrives: LSMA XY lead-screw driven stages, an MLVT Lift stage, and an RTHM worm gear rotary table.

Features include:

– XY stroke 100×100 mm

– Lift 13 mm

– Unlimited rotation

XY Lead-Screw Driven Stages – The LSMA miniature linear actuators designed for the space confined applications while retaining the high reliability required in production environments. It is an ideal choice for measurement, testing, alignment and component assembly in any application on the factory floor or laboratory environments.

The precision ball screw or micrometer grade lead screw provide excellent accuracy and repeatability with ultra-fine positioning resolution capability of 0.1 micron or finer when driven by the stepper motor. The servomotor version is equipped with a rotary encoder and provides exceptionally smooth travel.

Lift Stage – The MLVT Vertical Lift Stages offers precise vertical translation for payload elevation. A unique wedge design or direct drive motorized screw converts motor rotation into true vertical elevation of the platform. Precision bearings provide platform stiffness and stability while the screw mechanism assures positioning accuracy.

Rotary Table – The RTHM series rotary stages provide arc-second resolution when driven from a micro-stepping or a brushless servo motor controller. The low profile design is made possible by the use of compact precision bearings. The rotating carriage of the stage provides continuous rotation of load up to 10 kg and has large clear aperture to allow the passage of the optical path or cables directly through the stage. The main body of the stages is made from lightweight anodized aluminum and can attach directly to an optical table or moving linear or XY actuators and can be mounted at any orientation. A precision worm gear assembly is used to transfer the rotary motion of the stepper motor into rotary motion of the carriage. The small size allows use in confined spaces, such as laser cavities, disk texturing machines, manufacturing areas for fiber optical components or semiconductor manufacturing.

Specifications –

XY stage

LSMA-200

 Spec  Lift Stage

MLVT-70-13

 Spec  Rotary Stage

RTHM-151

 Spec 
Stroke (mm) 100 x 100 Lift (mm) 13 Rotation unlimited
Repeatability (µm) 1 Repeatability (µm) 2 Repeatability (arc-sec) 20
Resolution (µm) 0.3 Resolution (arc-sec) 1 Resolution (arc-sec) 0.5
Load capacity (kg) 6 Lift translation (mm/rev) 1 Torque (Nm) 0.5
Velocity (mm/sec) 20 (servo) Max velocity (mm/sec) 20 Angular velocity (rpm) 8
Mechanism, 

screw lead (mm)

lead-screw

0.5

Mechanism,

screw lead (mm)

direct drive screw

1

Mechanism,

ratio

worm gear

180:1

Motor stepper servo Motor stepper Motor stepper

servo

Options:

  • Steppers
  • Servos
  • Stroke lengths
  • Lift length
  • Complete Plug-and-Play system

Prints:

Intellidrives 4 Axis XYZ-Rotary System Drawings

FOR ADDITIONAL INFORMATION – CLICK HEREAbout IntelLiDrives —

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives at sales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website
Like us on Facebook
SUBSCRIBE TO LIST
FOWARD EMAIL

Motion Control – High Precision Vertical Elevator Stage from OES!

OES Motorized AZ60 Elevator Stage Stage

 

OES Logo

Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator stage for applications requiring precise vertical positioning. The 60 mm x 95 mm (2.362 in. x 3.740 in.) drilled and tapped stage has a vertical travel of 4 mm (0. 157 In.). Six crossed roller guides and a precision ground 8 mm dia. 250 µm/turn lead ball screw provides smooth, straight (straightness to <5 µm) vertical motion, and parallelism (<20 µm to the mounting surface), and high resolutions to 1.25 µm (full step), 0.625 µm (1/2 step), and 0.125 µm (1/10 micro step), and repeatability to +/- 0.5 µm. Travel speeds are up to 2.5 mm/sec.

Applications for the AZ60-A elevator stage include: Photonic alignment, wafer inspection, precision vertical alignment, laser marking, optical positioning, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.

The AZ60 – A Elevator Stage is constructed of black-anodized aluminum alloy and weighs just 1.14 kg (2.51lbs). A powerful 35 mm NEMA 14 1.8O 2-phase stepper motor has a double ended shaft with a knob for manual adjustments. This knob may be replaced with a quadrature encoder for position verification. The non-cantilevered moving wedge elevator stage has a load capacity of 7 kg (15.43 lbs) without concern for loss of parallelism, and the base plate has easy to access holes for mounting.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For Additional information about the AZ60-A Elvator stage CLICK HERE!

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

OES Motorized Vertical lift Stage

OES Logo

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.). The twin lead (right and left hand thread) precision ground screw and six guide rails provides smooth, flat (parallel to mounting surface), vertical motion, and high resolution to 5 µ (non-microstepping) and 0.50 µ (10 Microstep Driver), and repeatability is 10 µ at travel speeds of 5 mm/sec. Applications for the AT10-120 vertical lift stage include: Testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.

The AT10-120 low profile 90mm (3.54 in.) vertical stage is constructed of black-anodized aluminum alloy and weighs just 6 kg (13.23 lbs). The powerful 2-phase NEMA 23 Stepper and inclined plane and scissor lift concept offers higher load capacity to 15 kg (33 lbs) com-pared to vertically mounted stages, and without the concern for cantilevered effects (loss of parallelism), additionally, the moving platform has access from all four sides, and the base plate has easy to access holes for mounting.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Very Stable, High Precision, High Load, Low Cost Motorized Vertical Lift Stage from OES!

Motion Control Vertical Lift Stage

OES Logo

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion.

Applications for theAT20-100 vertical lift stage include: Testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.

The AT20-100 Vertical Lift Stage (lowered position) is 318 mm (12.52 in.) high. The stage is constructed of black-anodized aluminum alloy and steel shafting, and weighs just 10.5 kg (23.15 lbs). The powerful 2-phase NEMA Stepper and precision ground lead screw offers a high load capacity to 50 kg (110 lbs.) without the concern for cantilevered effects (loss of parallelism), additionally, the moving platform has access from all four sides. The limit switches prevent over travel, a hand knob on the extended motor shaft is for manual adjustments, and the base plate has easy to access holes for mounting.

The AT20-100 Vertical Lift Stage options include: Optical encoder, servo motor, and linear encoder. It is also available as a complete plug-and-play system with a motion controller.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos