Category Archives: Stage – Yaw

Motion Control – Optimal Engineering Systems, Inc. (OES) Introduces New, Motorized, High Resolution Pan-Tilt Stages!

Motion Control – Pan-Tilt Stage
motion control pan tilt stage

Van Nuys, CA – — Motion Control – High Resolution, Motorized, Pan-Tilt Stages have been added to the extensive line of OES (Optimal Engineering Systems, Inc.) motion control products. These motorized Pan-Tilt Stages are available in two sizes. The PT60-1 Pan-Tilt Stage is a combination of two 60 mm (2.362 in.) rotary stages and the PT100-1 is a combination of two 100 mm (3.937 in.) rotary stages, set at a 90O angle to each other. The rotary stages of each Pan-Tilt stage features a high repeatability of 0.005O (18 arc-sec), a positional accuracy of 0.005O (18 arc-sec), and a resolution of 0.001O = 3.6” (10 Micro-steps per Step Motor Driver in use).

motion control - oes

These Pan (horizontal table)-Tilt (vertical table) Stages are deal for: Scanning, testing, inspection, assembly, positioning, laser and micro machining, pointing optics and cameras, and other applications.

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control –  XYZ Axis Stages to Suit  Specific Applications!

motion control - custom stages
motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

Motion Control – Motorized Yaw-Pitch-Roll Stages Available from OES!

Motion Control – Yaw-Pitch-Roll Stages

motion control - yaw, pitch, and roll stages

 

OES Logo

Van Nuys, CA – — Motion Control – Three new high accuracy Yaw-Pitch-Roll stages have been introduced by OES (Optimal Engineering Systems, Inc.), the YPR100-10-15-01 (stepper motor driven – pictured), the YPR100-10-15-02 (brushless servo motor driven) and the YPR100-10-15-03 (DC servo motor driven). These Yaw-Pitch-Roll stages are ideal for the precise measurement of compound angles or the curvature of an object. The Yaw axis (bottom stage) is capable of rotation of large angles and features a 180:1 ratio gear. The positional accuracy is 0.05 degrees and repeatability is +/- 0.01 degrees. The Pitch axis (middle stage) has cross roller guides and a range of travel of +/- 10 degrees and has an accuracy of 0.05 degrees and repeatability of +/-  0.01 degrees.

The Roll axis (top stage) has cross roller guides and a range of travel of +/- 15 degrees and the 65 mm x 65 mm table has a precise pattern of threaded holes for fixtures or tooling. This stage has an accuracy of 0.05 degrees and repeatability of +/-  0.01 degrees and the total center deflection for all axes is 0.03 mm. The rotation center height is 50 mm.

The Pitch and Roll axes are equipped with end of travel limit switches. The yaw axis has a HOME signal for initialization. Additionally all axes have a calibrated indicator to display the angle of rotation. The maximum speed with stepper motors is 14 degrees/second and 90 degrees/second with servo motors.

The knobs of stepper motors can be replaced with optional optical encoders for position verification.  The YPR100-10-15-02 and YP110-10-03 feature servo motors and optical quadrature encoders for very precise closed loop operation and greater speeds.  The YPR100-10-15 stages can be ordered plug-and-play with a fully a compatible multi-axis motion controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Precisely Measure Curvature and Angles with New Dual-axis Pitch and Roll Stages!

Motion Control – Dual-axis Pitch and Roll Stages!

motion control | Pitch-and-Roll Stage

OES Logo

Van Nuys, CA – Motion Control – The precise measurements of angles and the curvature of objects are easily determined using two new Pitch and Roll stages just introduced by OES (Optimal Engineering Systems, Inc.). The PR100-45-01 (pictured) is driven by stepper motors and the PR100-45-02 is driven by brushless servo motors with quadrature incremental optical encoders.

The Pitch axis (lower stage) is a high precision goniometer stage which features preloaded cross roller guides and a high ratio worm drive for smooth motion over a range of travel of +/- 45 degrees. It has a typical accuracy of 0.05 degrees and repeatability of +/- 0.01 degrees. Additionally, this axis has end-of-travel limit switches.

The 100 mm diameter Roll axis (upper stage) has a 180:1 gear ratio for smooth motion and has a precise pattern of threaded holes for fixtures or tooling. This axis has an accuracy of 0.05 degrees and repeatability of +/-  0.01 degrees. The Roll axis has a Home signal for initialization. Each axis features a calibrated scale to visually display the angle. The maximum speed with stepper motors is 14 degrees/second and 45 degrees/second with servo motors.  The knobs of the stepper motors can be replaced with optional optical encoders for position verification.

The resolution of the PR100-45-01 stepper motor driven duel-axis stage depends on the resolution of the step motor driver resolution or the optical encoder if a servo motor is used. A resolution of 0.001 degrees equivalent to 3.6 arc-sec can be achieved using a10 micro-steps per step stepper motor driver or an encoder with a resolution of 500 cycles per revolution.

The PR100-45-02 that features servo motors and optical quadrature encoders are used for very precise closed loop operation and greater speeds. The PR100-45-01 and -02 stages can be ordered plug-and-play with a fully a compatible multi-axis motion controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com


See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos