Category Archives: Stages – X and Rotary

Motion Control – Two Axis X-Theta Voice Coil Positioning System from H2W Technologies

Motion Control – Two Axis X-Theta Positioning System

motion control - multi axis system

H2W Logo

Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY-Theta positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system.  The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system that can be used for positioning applications that require a limited rotation theta stage integrated. The stage utilizes a custom low-profile design that utilizes a unique electromagnetic circuit design. The motor has a two-axis planar coil assembly that interacts with a common magnetic circuit.  This circuit design allows for a minimal overall height of 2.93 inches [74.5 mm].

Each linear axis has a 0.23″ [6.0 mm] stroke; generate 0.50 lbs [2.2 N] of continuous force and 1.50 lbs [6.6 N] of peak force.  The X and Y axes are guided by precision linear ball slide assemblies. It includes a one-micron resolution magnetic linear encoder on each linear axis.  The theta axis has a rotary displacement of 10 degrees, a continuous torque of 2.2 in-lbs [0.25 Nm], and a peak torque of 6.5 in-lbs [0.73 Nm]. There is also encoder feedback on the theta axis that has 239000 counts per revolution. This design utilizes a moving coil in all three axes, which has a lower moving mass that enables the highest possible acceleration. Voice coil positioning stages are ideal for applications that require quick, short moves with fast settling times.

Features:

  • – Three-axis motion control 
  • – High acceleration 
  • – Compact footprint 
  • – Custom strokes and force configurations available 
  • – Cable carrier to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

 

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Two Axis X-Theta Voice Coil Positioning System from H2W Technologies

Motion Control – Two Axis X-Theta Positioning System

motion control - multi axis system

H2W Logo

Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY-Theta positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system.  The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system that can be used for positioning applications that require a limited rotation theta stage integrated. The stage utilizes a custom low-profile design that utilizes a unique electromagnetic circuit design. The motor has a two-axis planar coil assembly that interacts with a common magnetic circuit.  This circuit design allows for a minimal overall height of 2.93 inches [74.5 mm].

Each linear axis has a 0.23″ [6.0 mm] stroke; generate 0.50 lbs [2.2 N] of continuous force and 1.50 lbs [6.6 N] of peak force.  The X and Y axes are guided by precision linear ball slide assemblies. It includes a one-micron resolution magnetic linear encoder on each linear axis.  The theta axis has a rotary displacement of 10 degrees, a continuous torque of 2.2 in-lbs [0.25 Nm], and a peak torque of 6.5 in-lbs [0.73 Nm]. There is also encoder feedback on the theta axis that has 239000 counts per revolution. This design utilizes a moving coil in all three axes, which has a lower moving mass that enables the highest possible acceleration. Voice coil positioning stages are ideal for applications that require quick, short moves with fast settling times.

Features:

  • – Three-axis motion control 
  • – High acceleration 
  • – Compact footprint 
  • – Custom strokes and force configurations available 
  • – Cable carrier to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

 

 

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – Two Axis X-Theta Positioning System from H2W Technologies

Motion Control – Two Axis X-Theta Positioning System

motion control two axis positioning stage

 

H2W Logo

Santa Clarita, CA —– Motion Control – The SRT-030/360-026-01 is a two axis X-Theta positioning system ideal for precision motion control applications that require coordinated linear and rotary positioning. The 2 axis system consists of a rotary DC servo motor with encoder mounted to a moving brushless linear motor driven positioning stage.

The linear axis uses an H2W brushless linear motor BLDM-C08 to generate a continuous force of 26 lb [115.5 N] and a peak force of 78 lb [347 N] with a stroke length of 30 in [768 mm]. The non-contact 1 micron resolution linear encoder allows for precise positioning along the linear axis. It is guided by a pair of precision recirculating linear ball bearings.

The rotary axis consists of a standard 34-frame rotary servo motor with a 10,000 counts/rev resolution encoder. The motor can generate a continuous torque of 29 lb-in [3.3 N-m] and a peak torque of 87 lb-in [9.9 N-m]. The rotary axis is removable, which allows for higher accelerations by reducing the moving mass of the linear axis.

The system can be oriented in any orientation. There are also provisions that allow customer cables to be routed within the cable carrier. The system has a reference mark, end of travel limit switches and hard stops.

Features:

  • – Combined linear and rotary displacement 
  • – Two axis of coordinated motion 
  • – Rotary axis is capable of full 360-degree rotation 
  • – Rotary axis can be easily removed if needed 
  • – Cable carrier to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com


See this and other Motion Control Components from H2W Technologies featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

H2W Logo
Visit our Website
You Tube
Visit our Blog

Motion Control – High Speed, High Force, Sub-micron Positioning, Voice Coil Stage Features 20 mm Aperture!

Motion Control Miniature Stage

Sunnyvale, CA, — — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.

The compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions, 1098 W. Evelyn Ave. Suite #102; Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

 

Visit our Website
Motion Control - Follow Equipment Solutions on Twitter
Motion Control - Follow Equipment Solutions on Facebook
View Equipment Solutions Motion Control Blog

Linear Motion Control – Six-Axis Linear and Rotary Positioning Stage!

H2W Technologies Six Axis Linear Motion Rotary Positioning Stage

Linear motion H2W Logo

Santa Clarita, CA —– Linear Motion Control – The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane.

Each linear axis uses a H2W brushless linear motor BLDM-D06 to generate a continuous/peak force of 24.8 lbs [110 N]/74.5 lbs [331 N] with each moving table capable of a total stroke length of 82 in [2083 mm]. Each linear axis has an independent non-contact 1.0-micron resolution encoder head reading a single encoder scale allowing for precise positioning using any multi-axis motion controller. Each moving table is guided by a rigid recirculating ball linear bearing block sharing a single linear bearing rail.

Each rotary axis consists of a standard 34-frame rotary stepper motor with a 40,000 counts/rev resolution encoder. Using a state-of-the-art motion control electronics package provided by H2W, each rotary stepper motor can operate as a 2-phase rotary brushless motor. Each motor can generate a continuous torque of 27.1 oz-in [3.06 N-m]. Each rotary axis is removable, which, in turn, reduces the moving weight of the linear axis to which it was mounted. This allows for larger payloads on each linear axis.

The entire stage is assembled on a single piece of aluminum extrusion, thus reducing the overall weight of the system. It has end-of-travel rubber bumper stops, a home positioning sensor, end-of-travel-sensors, and custom mounting holes are available upon request. There are also provisions that allow customer cables to be routed within the cable carriers.

Features:

  • Multiple linear motors on single magnet track Combined linear and rotary displacement
  • Rotary axis is capable of full 360-degree rotation
  • Ability to run closed loop rotary stepper motors
  • Rotary axis can be easily removed
  • Six axis of coordinated motion
  • Assembled on a single piece of aluminum extrusion
  • Cable carriers to route customer payload cables

About H2W Technologies, Inc.

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. The complete line of linear electric motors includes: Single and dual axis linear steppers, DC brush and brushless linear motors, voice coil actuators, and AC induction motors. Also offered is a complete line of ball screw, lead screw and belt driven positioning stages.

Other motion control products include: Limited angle torque motors for compact, limited angular excursion rotary servo applications, 3 phase brushless rotary servo motors with matching digital servo amplifiers and permanent magnet linear brakes for fail-safe, zero power braking for baggage handling and people moving applications as well as amusement park rides.

With over 75 years combined experience in the linear and rotary motion field, the H2W Technologies team of engineers offers the optimal solution to the most demanding motion control, requirements.

See Article: https://www.h2wtech.com/article/six-axis-linear-and-rotary-positioning-stage

See Video at Youtube: https://youtu.be/cfnl7wxrLCs

See Product: https://www.h2wtech.com/page/six-axis-linear-and-rotary-positioning-stage

For additional information contact Mark Wilson at H2W Technologies, 26380 Ferry Ct, Santa Clarita, CA 91350; Tel: 888-702-0540, Fax: 661-251-2067, E-Mail: info@h2wtech.com or visit the website at http://www.h2wtech.com

H2W Logo
Visit our Website
You Tube
Visit our Blog