Category Archives: XYZ Axis Stage

Motion Control – ZrO2 Zirconia Ceramic Radial Ball Bearings For High Loads available from LM76 are FDA/USDA/3A-Dairy Compliant!

Motion Control – Zirconia Ceramic Radial Bearings
motion control radial bearings

E. Longmeadow, MA — Motion Control – LM76 has announced the release of their new line of Radial Ball Bearings featuring ZrO2 (Zirconia) Ceramic balls. To Complement LM76’s broad range of Linear Bearings that are FDA/UDSA/3A Dairy compliant, as well as linear bearings for extreme environments; they have added Deep Groove bearings which accommodate radial and axial loads, Angular Contact bearings for simultaneously handling radial and axial loads, Spherical Bearings which are self aligning, and Thrust Bearings for high axial loads. Each of the four types of metric bearings are available in a wide range sizes.

motion control - linear motion products

The advantages of ZrO2 ceramic balls are: FDA/USDA/3A Dairy/Caustic washdown compliant, lighter than steel balls and can be used at extreme RPMs, they withstand higher loads without spalling, have a lower coefficient of friction, are inert to chemicals, have no magnetic signature, and are non conductive.

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

Motion Control – Electric Cylinder Has Zero Cogging

 

motion control - electric cylindermotion control - moticont

 

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Motion Control – 1.25 Inch Stroke Linear Voice Coil Motor Tolerates Tilting and Misalignment is available from Moticont!

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - lm76

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear stage

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

Motion Control – XYZ Axis Voice Coil Actuator

motion control - 3 axis voice coil stage

 

MotiCont-Logo

Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm). The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

The VCLM-XYZ-51-032-025-070 three axis linear actuator stage features resolutions of 1.0 micron for the X and Y axes. The Z axis has a resolution of 1.25 microns. All axes are equipped with a HOME switch. The stationary axis has a footprint of only 2.00 in. x 5.00 in. (50.8 mm x127.0 mm) with convenient mounting holes and an internal thread on the non-rotating shaft of the Z axis actuator. This XYZ actuator can easily be integrated into new and existing applications, and is ideal for: Assembly, pick-and-place, testing, inspection, sampling, and probing applications, especially in confined spaces.

Moticont can quickly provide the XYZ-10 three axis linear actuator as an easy to install complete plug-and-play linear motion system including the servo controller.

About Moticont – Moticont is a manufacturer of motion control products. Our product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com


See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

MotiCont-Logo
Visit our Website
Other Products
Videos