Van Nuys, CA – Innovative Automation – New High Precision Three-axis ZGG-60-10-15 Series of Lift, Pitch, and Roll Stages have been released by Optimal Engineering Systems, Inc. (OES). These compact stages feature 60 mm +/- 2 mm (2.362 in. +/- 0.078 in.) of vertical travel.
Motion Control – Solenoids – Van Nuys, CA – Magnetic Sensor Systems (MSS) Has released the SDM840 Solenoid Driver Module as a complement to their Series of Solenoids and those of other manufacturers that includes: Tubular, Open Frame, Low Profile, Hinged Clapper, Latching, and Rotary Solenoids. This compact, quiet 20 kHz pulse width modulated driver module measuring just 1.65 in. x 2.50 in. is designed to consume less energy by first applying the voltage for a pre-determined period of time necessary to activate the solenoid and when the plunger is seated, drop the voltage to a level sufficient to hold the solenoid in the seated position conserving energy and avoiding overheating the solenoid’s coil.
This also allows smaller solenoids to be used when a large force at a long stroke is required by applying high voltage to the solenoid providing the necessary force to pull the plunger in, then dropping the voltage down to maintain the plunger in place.
E. Longmeadow, MA — Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.
Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.
Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.
Innovative Automation – Van Nuys, CA – Newly released from Moticont, the miniature GVCM-019-022-02 Linear Voice Coil Servo Motor, is just three-fourths of an inch (19.0 mm) in diameter and features a half inch (12.7 mm) stroke. This very small linear actuator, also referred to as an electric cylinder, features 8.4 ounces (2.3 N) of continuous force and 26.6 ounces (7.4 N) of peak force at a 10 percent duty cycle. This non-commutated brushless servo motor features: High reliability, high speed, high acceleration/deceleration, and repeatability when used in a servo loop, and zero cogging.
Forestville, CA, – — Innovative Automation – LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.
Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexture guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.
Van Nuys, CA – Innovative Automation – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.
Motion Control – Van Nuys, CA –Latching Bi-Directional Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The S-18-100LC2 and S-18-100LF2 Latching Bi-Directional Solenoids feature the same compact dimensions: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 6-32 threaded Push/Pull plungers.
The plungers have a travel of 0.19 in. and in the extended position are 0.50 in. long, two 8-32 (or optional M4) threaded mounting holes are located on the underside of the solenoids.
E. Longmeadow, MA – Motion Control – Linear Motion – Pegasus Hybrid Linear Bearings for the times Bearing Failure just can not be allowed to Happen! That is the the time when Down-Time is more costly then the price of the bearings.
Vaughan, Ontario, Canada — Motion Control Components — Electromate Inc., a leading distributor of industrial automation products, motion control systems and robots has announced a new partnership with Spin Robotics, a Danish manufacturer of collaborative robot (cobot) accessories. The partnership will bring Spin Robotics’ screwdriving solutions to the Canadian market, providing customers with efficient and reliable cobot solutions for screwdriving applications.
Van Nuys, CA – Motion Control – The LVCM-025-029-02 and the LVCM-025-029-02M (Metric version) have been added to the Moticont’s line of Linear Voice Coil Servo Motors. These miniature 1 inch (25.4 mm) diameter brushless high speed linear servo motors feature high force-to-size ratios, and zero cogging. Clean, quiet, and efficient they feature high accuracy and high repeatability, and sub-micron resolution when operated in a closed loop as a DC servo motor. Featuring low inertia and high acceleration/deceleration for high throughput, these new linear servo motors have a stroke length of 0.313 in. (7.9mm), a high-force-to-size ratio of 37.6 oz. (10.5 N) and a peak force of 118.9 oz. (33.1N) at 10% duty cycle.
Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.
Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.
Van Nuys, CA – Innovative Automation – The AY110-40-01 Rotary Stage (pictured) from Optimal Engineering Systems, Inc. (OES) offers the users a high precision, low profile, compact motorized rotary stage. This precision stage with a diameter of 40 mm (1.575 in.) table is just 30 mm (1.181 in.) high and the footprint is only 133 mm by 57.5 mm (5.236 in. by 2.264 in.). The stage has an 8 mm (0.314 in.) aperture, a vernier scale, and a pattern of threaded mounting holes in the rotary table, and holes in the base for easy integration into new and existing applications.
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.
The S-70-300H Series of solenoids feature a 3.000 in. diameter x 7.00 in. long housing and a 1.75-12 UN A thread for mounting.
E. Longmeadow, MA – Motion Control – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices).
Vaughan, Ontario, Canada — Motion Control – Electromate Inc., a leading Distributor of Precision Robotic & Mechatronic Solutions, is excited to announce the pre-order availability of Universal Robots’ latest innovation – the UR30 collaborative robot (cobot). The UR30, boasting a 30 kg payload capacity, is the newest addition to Universal Robots’ cutting-edge cobot lineup.
Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-01, from Moticont features a high force-to-weight ratio of 14.5 oz. (4.0 N) continuous force and 45.7 oz. (12.7 N) peak force in a compact 0.875 in. (22.2 mm) diameter x 0.50 in. (12.7 mm) long package. This clean, quiet, efficient, low inertia, high acceleration, high speed motor has zero cogging and features high accuracy, and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop as a DC servo motor.
Fall River, MA — Motion Control – maxon DC motors are high-quality DC motors equipped with powerful permanent magnets. The centerpiece of the motor is the globally patented ironless rotor. It offers cutting-edge technology for compact, powerful drives with low inertia. As a result of their low mass moment of inertia, the DC motors feature very high acceleration. The modular and configurable DCX and DC-max programs can be adapted flexibly to the needs of the customer.
and available for online configuration. Configure sizes
from Ø 6 – 35 mm. Choose between precious metal
or graphite brushes, ball or sintered bearings,
and much more.
For product details & specifications: CLICK HERE
VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.
