Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator stage for applications requiring precise vertical positioning. The 60 mm x 95 mm (2.362 in. x 3.740 in.) drilled and tapped stage has a vertical travel of 4 mm (0. 157 In.). Six crossed roller guides and a precision ground 8 mm dia. 250 µm/turn lead ball screw provides smooth, straight (straightness to <5 µm) vertical motion, and parallelism (<20 µm to the mounting surface), and high resolutions to 1.25 µm (full step), 0.625 µm (1/2 step), and 0.125 µm (1/10 micro step), and repeatability to +/- 0.5 µm. Travel speeds are up to 2.5 mm/sec.

Applications for the AZ60-A elevator stage include: Photonic alignment, wafer inspection, precision vertical alignment, laser marking, optical positioning, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities.

The AZ60 – A Elevator Stage is constructed of black-anodized aluminum alloy and weighs just 1.14 kg (2.51lbs). A powerful 35 mm NEMA 14 1.8O 2-phase stepper motor has a double ended shaft with a knob for manual adjustments. This knob may be replaced with a quadrature encoder for position verification. The non-cantilevered moving wedge elevator stage has a load capacity of 7 kg (15.43 lbs) without concern for loss of parallelism, and the base plate has easy to access holes for mounting.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For Additional information about the AZ60-A Elvator stage CLICK HERE!

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Greenville, DE —-Motion Control – CANopen is a robust and low cost serial protocol that offers enhanced diagnostic and control capabilities with reasonable bandwidth. Advanced Motion Controls’ DigiFlex® Performance™ drives follow the CiA DS301 communications profile and the CiA DS402 device profile

The Motion Control DigiFlex® Performance™ panel and pcb mount servo drives offer full tuning control of all servo loops and are designed for distributed or centralized servo systems. These servo drives utilize CANopen® communication and are commissioned with AMC’s user friendly DriveWare® Software via an RS-232 interface.

AMC’s CANopen DigiFlex® Performance™ drives features:

• Standardized object set and device profiles specific to motion control
• Centralized control reduces bus traffic
• 1M bit/sec max speed
• 130 ms message time
• Close to 1 kHz servo drive update rate possible
• Readily available 3rd party peripheral hardware for different platforms

CLICK HERE for more information on the CANopen servo amplifiers from Advanced Motion Controls.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Maxon motors introduces a NEW Super-fast and sterilizable Brushless Motor!

Fall River, MA – Motion Control Components – maxon motor launches new high-speed motors that are configurable online. The new ECX brushless motors are quiet and feature very high efficiency. These brushless drives are ideal for use in hand-held surgical tools and industrial spindles.

The ECX SPEED series of brushless motors has been optimized for high speeds (up to 120,000 rpm). Several different performance classes are available to fit your application: Standard, High Power, sterilizable (up to 2000 cycles) or with ceramic bearings for high speeds.

With a few clicks of your mouse you can configure your drive online and place your order. With maxon motor’s configurator, it is easy to put together a customized DC motor – including gearhead, encoder and controller, to your specifications. Now, in addition to the brushed motors, you can also configure these three new high speed brushless micro motors.

ECX motors are available with diameters of 8 mm, 16 mm and 19 mm achieving speeds of up to 120,000 rpm. They run very smoothly and are highly efficient. They are available with different power stages and in standard or sterilizable versions.

All three high-speed motors (8 mm, 16 mm and 19 mm) are now available in maxon’s online shop, where customizing the drives is easy. This means that customers can fit the drives with specific mechanical and electrical components specific to their application needs. For example, with the ECX 8 mm, the GPX planetary gearheads and ENX 8 encoders are available. It is also possible to customize the shaft lengths, winding types, ball bearings and much more.

Select the mechanical and electrical interface online.

Lean, automated processes ensure that all configurable drives are ready for shipment within 11 working days.

For More Information CLICK HERE

To View Video CLICK HERE

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Sunnyvale, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke. The SMS12 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.

Specifications:

• Translation 43µm/step
• 0.67µm @ 64µstep/step
• Maximum Travel 12mm
• Maximum Acceleration 2G
• Maximum Velocity 250mm/sec
• Maximum Load Capacity 13kg
• Maximum Moment Load 1.8kg
• Positioning Accuracy ±2µm
• Bidirectional Repeatability ±1µm
• Homing Repeatability ±1µm
• Motor Amps/Phase 0.3
• Dimensions 39.1 x 39.1 x 31.75mm

The SMS12 can be ordered with an optional stepper motor controller that is nearly the same size a the SMS12 itself. Only raw power and a simple RS232/RS485 communications line is needed to completely control this high-resolution stage.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

To view and/or down load the Data Sheet CLICK HERE

For additional information contact Jeff Knirck at Equipment Solutions, 1098 West Evelyn Ave. #102, Sunnyvale, CA 94086; Tel: 408-245-7161, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

Greenville, DE –— Motion Control – Servo2Go.com has just added remarkable new additions to its broad range of cost-effective 24V electric linear actuators from Dyadic Systems. The SCN6 series actuators are compact yet powerful integrated mechatronic cylinders that feature a motor, encoder, drive and actuator in one integral package

Dyadic Systems has developed the linear actuator drive mechanism such that the screw and nut are optimized for high accuracy, long life and low cost while delivering high speed and peak thrust. This blend of low-cost and high performance could only have been realized by the advanced technology of Dyadic Systems. These new product concepts give engineers a wider range of options to eliminate over-design.

SCN6 series Mechatronics Cylinders are available in stroke lengths to 300mm and 500N (51kgf) maximum thrust and are constructed using an extruded aluminum body with 303 stainless for the shaft and rod tip. Actuators can easily be operated via 24VDC signals from PLCs or relays, and can be connected in networks of up to 16 axes.

Servo Actuators from Dyadic feature:

• Teach pendant, PLC pendant or PC Tool Kit programmable
• +-0.1mm repeatability
• 0.3mm backlash
• 50-300mm stroke versions
• Up to 200mm/sec max. speed
• 16 discrete position program capacity
• IP40 sealed, with optional IP54 sealing
• Electric actuators – programmable in 15 minutes!
• The SCN6 starts from only $465 US/ea!
• Moves can be relative, absolute, force controlled, and more
• All actuators run on 24VDC – easy to connect to your existing power supply
• Air cylinder replacement mode and move sequencing available in the cylinder!

More information on the SCN6 series Mechatronics Cylinders available from Servo2Go.com can be viewed at: http://www.servo2go.com/supplier.php?id=1078787302

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada — Motion Control Components – Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

• Size 15, 20, 25, 30, 35, 45
• N, H and P accuracy grade
• V0, V1 and V2 block pre-load
• Short/Normal/Long block lengths
• Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

featuring:

• 2 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• SS bearing, rail, and balls
• Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

featuring:

• Application Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

featuring:

• Heavy Load Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Vaughan, Ontario, Canada — motion control – Galil Motion Control introduces the DMC-52xx0 EtherCAT master, Galil’s first 32 axis motion controller. This new addition to Galil’s EtherCAT family is a pure EtherCAT controller with the ability to control up to 32 drives and 2 I/O modules. This space efficient package also provides uncommitted I/O for easy integration into any EtherCAT application.

The DMC-52xx0 is offered in 2, 4, 8, and 16 axis formats (32 axis coming soon). Coordinated moves can be done within banks of up to 8 axes allowing for minimal changes of Galil’s programming language. The DMC-52xx0 operates in Cyclic Synchronous Position mode (CSP). In this mode, the servo control loop is closed on the EtherCAT drive while the Galil controller sends motion profile commands at a rate of 1 kHz. Galil supports a host of EtherCAT devices for virtually any application. See the list below for more details.

Designed to solve complex motion problems, the DMC-52xx0 can be used for applications involving jogging, point-to-point positioning, position tracking, contouring, linear and circular interpolation, electronic gearing, ECAM and PVT. The DMC-52xx0 makes configuration and programming easy with just a handful of EtherCAT configuration commands and Galil’s intuitive, two-letter programming language.

The DMC-52xx0 comes with one Ethernet port for communication with a host PC and one EtherCAT port to communicate with EtherCAT drives. Multiple EtherCAT drives can be linked together in a daisy chain configuration and connected to the controller’s EtherCAT port, simplifying wiring and decreasing setup time. One USB port is also provided for alternative communication with a host PC. The DMC-52xx0 is packaged in a compact metal enclosure measuring 9.75” x 5.00” x 1.60” and is powered by a single 90-250 VAC supply.

More information oinformation on the DMC-52xx0 EtherCAT Master Controller from Galil can be viewed at –
http://www.electromate.com/assets/catalog-library/pdfs/galil-motion-control/Galil_DMC-52000_Brochure.pdf

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Van Nuys, CA – Optimal Engineering Systems’ (OES) low profile, XYθ (theta) stages are designed for high precision alignment applications. These stages move in an XY-plane and rotate around the center of the XY-plane. The terms alignment table, or XY-rotation stage are often used interchangeably with XYθ, or XY-theta stage. Available in 12 models, in two precision grades, these stages have linear travels from +/- 2 mm by +/- 2 mm (+/- 0.078 in by +/- 0.078 in) up to +/- 30 mm by +/- 30 mm (+/-1.181 in by +/- 1.181 in). Additionally, XYθ (theta) stages can rotate around the center of the XY plane up to +/- 6O. Four models of the XYθ (theta) stages have solid tables that are sized from 100 mm by 100 mm (3.937 in by 3.937 in) to 200 mm by 200 mm (7.874 in by 7.874 in), and eight stages, from 250 mm x 250 mm (9.843 in by 9.843 in) to 1500 mm by 1500 mm (59.055 in by 59.055 in), are hollow core (open frame) stages.

Available in Normal and Precision grades, these XYθ (theta) stages have preloaded cross roller bearings and typical Normal Repeated Positioning Accuracy is from +/- 1.75 µm to +/- 2.5 µm, and typical Precision Repeated Positioning Accuracy is from +/- 0.7 µm to +/- 1.0 µm.

Parallelism of these XYθ (theta) Stages is as low as 30 µm, and the larger stages can handle dynamic loads to 600 kg (1323 lbs). The stages’ surfaces are treated to ensure durability and they are compatible with OES’ line of Motion Controllers. XYθ (theta) Stages can be ordered with linear encoders for closed loop operation, customized to meet specific requirements, and complete ready to run alignment systems.

Typical applications include: Panel Lamination Machinery, panel Film Laminating Machines, print Screen and 3D printing, CNC equipment, angular glass cutting & grinding equipment, wafer alignment equipment, exposure equipment, and semi-conductor equipment.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, , E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Greenville, DE —-Motion Control Components – Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor.

The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3″ OD.

Features of FSB Spring Applied Brakes:

• 12V, 24V, 90VDC or 120VAC windings
• Static torque to 100 lb-in
• Bore sizes from 1/4″ to 3/4″
• Low current consumption
• Low cost
• Metric bores & special voltages available

CLICK HERE for more information on the Spring Applied Brakes from Inertia Dynamics.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Fall River, MA — Motion Control – With their optimized magnetic circuit and special rotor, the new brushless DC motors from maxon deliver an impressive amount of torque. The EC-i 52 drives are considered to be high quality at an attractive price.

There is an increasing demand for DC motors that are powerful and compact, especially in applications such as robotics and industrial automation. Swiss drive specialist, maxon motor, has developed a range of brushless DC motors that meet these special requirements: the EC-i High Torque. The latest addition to these drives is the largest and most powerful model, with a diameter of 52 millimeters and a continuous torque of up to 440 mNm.

Matching gearhead and controller also available

The housing and flange of the EC-i 52 High Torque are made of steel, which makes the motor extremely robust. It also does not heat up so quickly. It is manufactured in maxon’s plant in South Korea, which guarantees an excellent price/performance ratio. If required, the EC-i 52 brushless DC motor can be combined with an encoder, gearhead and controller from maxon. Check out our easy to use online shop at shop.maxonmotor.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.shop.maxonmotor.com.

Motion Control – Linear Focus Actuator

Forestville, CA – Motion Control – The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. It utilizes a 64-bit DSP processor with latest FPGA technology for required extensive calculations.

This compact, low cost, plug-and-play multi-axis servo motion controller is supplied with power supplies, servo motor drivers, USB cable and free control panel software. The user friendly software allows for quick set-up and operation. It can be controlled using a Micro-Controller, PLC and PC using a popular programming language such as C/C++, Visual Basic, LabVIEWTM, or MatlabTM.

This controller series can support up to four axis of motion. Modes of motion include coordinated motion, point-to-point positioning, and jogging.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Greenville, DE — –Motion Control Components – The Ethernet IP Marquee revolutionizes the industrial market on how a marquee sign should connect and communicate on the Rockwell Ethernet/IP network. The Ethernet IP Marquee has a built in WEB server, eliminating the need to install software to program the marquee sign. Setup of the display is as simple as opening a WEB browser on your computer and entering the IP address of the marquee sign. With its fully integrated package, the Ethernet IP Marquee allows the user to configure and broadcast plc data and message information without programming communication blocks within the ladder logic code of the plc.

The product’s innovation allows the user to set up the functionality of the marquee sign and simply connect to the Rockwell plc. The messages displayed on the marquee can be alarms, machine performance, or production data. These messages are selected and displayed through internal registers from the plc. The format of these registers can be any combination of bits, words, or strings. The Ethernet IP Marquee has an additional ethernet port built into the marquee sign. This second port gives the marquee the flexibility to broadcast information to any computer on the plant network through the web server. This computer can monitor production data and collect real time information from the plant floor by simply entering the IP address of the marquee.

Also, third party spreadsheets can be used to monitor and store the information broadcasted by the marquee sign. With no software to install, the Ethernet IP Marquee stands alone as the new innovative way for a marquee sign to communicate on the Rockwell Ethernet/IP network.

More information on the Ethernet/IP Marquee from Exor Electronic can be viewed at: http://www.servo2go.com/product.php?ID=105218&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada — Motion Control -Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

• Size 15, 20, 25, 30, 35, 45
• N, H and P accuracy grade
• V0, V1 and V2 block pre-load
• Short/Normal/Long block lengths
• Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

featuring:

• 2 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• SS bearing, rail, and balls
• Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

featuring:

• Application Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

featuring:

• Heavy Load Rail
• 4 rows of re-circulating balls
• Equal loading in all directions
• Dust proof design
• Alloy steel bearing, rail, and balls
• Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

A lightweight motion control micro gripper, the MGR5 was designed for small, fragile part assembly. The MGR brings operation force 10 gram or less capability into range. Light moving mass reduces impact force during small product placement.

Vaughan, Ontario, Canada — Motion Control Components –SMAC electric grippers incorporate programmable speeds, positions and forces with data feedback. The ability to independently control each jaw allows precise force control, measurement and positioning. This makes them ideal for a wide range of positioning, measuring, and inspection applications, particularly where 100% verification is required.

MGR5 Specs:

• Compact and lightweight
• Light force capability 10g or less
• Soft-Land capability for pick and place of delicate and fragile parts
• Each jaw can be independently controlled in force, position and velocity
• 5 micron linear encoder standard, 1 micron optional

CLICK HERE view a YouTube video on the MGR5: https://youtu.be/xFKf8cvsI3s?list=PLrKivfJ0mSQmipxBvNOFax0cXtwT0s5iZ

CLICK HERE to view the specifications of the MGR5 Series Micro Gripper.

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Greenville, DE –— Motion Control – Advanced Motion Controls (AMC) is a world leading servo drive manufacturer providing solutions for motion control. Today, servo drives are an essential part of motion control systems, and AMC servos are an excellent foundation for high performance. Advanced Motion Controls has become synonymous with servo solutions that are reliable, cost-effective, customer specified and delivered on time.

Currently, AMC offers hundreds of standard servo drive and amplifier models, accept various command signals, communicate over several networks and operate in many different modes. For instance, the digital product line supports several different interface options including: analog input, step and direction, encoder following, RS-232/485, CANopen or SynqNet™. These same interfaces can be found on servo drives with power output capabilities ranging from 20W up to 40KW of peak output!

Available AMC Products by Network connections (centralized or distributed servo systems):

• CANopen
• RS232, RS485
• EtherCAT
• EPL
• Ethernet PowerLink
• SynqNet

We also have technology to support the following interfaces: DeviceNet, Ethernet TCP/IP, FireWire, Profibus, USB, Universal Serial Bus and Sercos.

Products include:

• Brush DC Servo Drives
• Trapezoidal Brushless Servo Drives
• Digital Input Sinusoidal Brushless Servo Drives
• Analog Input Sinusoidal Brushless Servo Drives
• PWM Input Servo Drives
• CANopen Brushless Servo Drives
• SynqNet Brushless Servo Drives
• Single Phase Input Models
• Power Supplies & Accessories
• PCB mounted Extended Environment Models available in both digital and analog varieties

The family of AMC’s Servo Amplifiers can be viewed at: https://www.servo2go.com/supplier.php?id=1031080098

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 FREE or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Vaughan, Ontario, Canada — Motion Control Components –Netzer’s world-wide patented, rugged high performance Electric Encoder™ technology, suits a wide variety of applications ranging from space and avionics, through military and defense, to instrumentation and automotive. Netzer Rotary Encoders feature absolute or incremental position feedback providing analog or digital outputs..

The Non-contact, motion control absolute-position Electric Encoder™ relies on interaction between the measured displacement and an internally shielded, space/time modulated, electric field and offers features unsurpassed by traditional optical and magnetic encoders.

The DS-58 is a member of the DS series of Non-contact, absolute-position Electric Encoders™, based on Netzer Precision proprietary technology. These encoders offer many advantages, some unparalleled:

• Low profile (17 mm) & low weight
• 18bit resolution
• 0.02° accuracy
• Analog Sin/Cos, Digital SSi , or Digital AqB+I outputs
• Hollow, floating shaft
• No bearings or other contacting elements
• Low power options
• Analog or multiple digital interface options
• High tolerance to temperature, shock, moisture, EMI, RFI and Magnetic fields

CLICK HERE to view additional information on the DS-58 Absolute Encoder from Netzer Precision.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Linear Motion Control Components

– General Catalog from LM76

To view the catalog – Click Here

To go directly to the LM76 Website – Click Here

To return to your previous please use the back arrow

Go to http://catalogs-motioncontrol.com

Vaughan, Ontario, Canada — Motion Control Conponents–BOGEN develops and produces high-precision variable magnetic scales and measuring systems to measure angle, distance, position.

As the available space for position measurement is always tight, BOGEN has introduced a more compact version of the magnetic measuring head IKS9. In addition to the existing design style with an 11 mm wide body, the measuring head IIKS9. is now available in 9 mm width to be used in the most confined spaces. Despite reducing the package size, the IKS9. benefits remain the same – the highest accuracy for magnetic measurements with freely selectable resolutions. The IKS9. impresses customers in automation, instrumentation and motion control applications with an extremely high accuracy and a particularly high degree of modularity

BOGEN magnetic heads comply with the relevant national and international standards (ISO, DIN, IATA, ABA, etc.) and can be used with various magnetic coercivities. Special solutions for reading magnetic ink (Magnetic Ink Character Recognition: MICR) and for recognizing and validating banknotes are also a part of their product portfolio

BOGEN has been developing and producing magnetic heads for demanding applications since 1951. Their core competence is in the design and implementation of customer specific magnetic solutions for applications such as access control in multi-storey car parks, for the detection of credit card information in ATMs or magnetic sensors for the reliable validation of bank notes.”

CLICK HERE to view more information on the high-precision variable magnetic scales and measuring systems from Bogen Magnetics

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Van Nuys, CA – — Motion Control –- Goniometer stages can measure angles of objects such as crystals or move an object to a precise angular position along an arc, in relation to a fixed point in space. Two goniometer stages mounted in an alpha-beta configuration (stacked) can rotate an object around a fixed point in space on a spherical surface. Optimal Engineering Systems (OES) offers stacked, precision aligned goniometer stages with a rotation center 50 mm above the upper stage. The lower (AK110-10) goniometer stage features a 65 mm x 65 mm table, ± 10O of rotation at a rate of 7O per sec. The upper (AK110-15) goniometer stage features a 65 mm x 65 mm table, ± 15O of rotation at a rate of 10O per sec. The accuracies for each unit are; repeatability: ± 4″ (240 arcseconds), typical positional accuracy: ± 9″ (540 arcseconds), and typical backlash is ± 3″ (180 arcseconds). Goniometers and stacked goniometers are used for: Identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, Directing lasers, aligning mirrors, and manufacturing of quartz oscillator plates using quartz cutting x-rays.

The precision, compact AK110-15-10 Goniometer stacked stage, available with either stepper, servo motors, optical encoders or manual adjustment knobs. It has a footprint of just 169 mm x 169 mm, and can be supplied plug-and-play with a motion controller. It is easily integrated into an inspection, testing, or manufacturing environment.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com