Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The hollow core motorized linear stages are fully self-contained. Each stage utilizes a voice coil motor, a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request.

Motion Control Hollow Core Voice Coil Driven Stage HCDS-051-032-01 Series with Quadrature Position Sensor and Home Switch

• Range of Motion: 0.97” (24.6 mm)
• Efficient Force within First 0.750″ (19.1 mm) of Stroke
• Positioning Resolution: 1 through 29.95 microns
• Continuous Force: 4.9 lb (22.0 N) through 6.3 lb (28.2 N)
• Intermittent Force: 15.7 lb (69.6 N) through 20.0 lb (89.9 N) at 10% duty cycle
• Optional Return Spring
• Cross Roller or Linear Ball Bearing
• Built-in Home Switch
• Quadrature Optical Encoder with Differential Outputs
• Also Available Without Encoder
• The stages may be stacked in XY, XZ and XYZ configurations.

Note: To meet the requirements of your motion control application these stages are available in variety of resolutions as stated. All stages also available without encoders.

Videos of Motorized Linear Stages:

For PDF Catalog of Voice Coil Stages from Moticont – Click Here!

For additional information contact MotiCont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: , Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

Motion Control — High Performance Drive in a Small Package!

Maxon’s smallest Motion Control DC brushless motor is only four millimeters in diameter and comes in two different lengths. Certified in accordance with ISO 13485, the new brushless micro drive is ideal for medical applications.

Fall River, MA — Motion Control — The EC 4 brushless DC motor is maxon motor’s ultra-compact solution to the market needs. As the smallest micromotor to come from the Swiss manufacturer, the EC 4 is only four millimeters in diameter. It is available in two lengths, with power ratings of 0.5 and 1 W. Equipped with an ironless maxon winding, the EC 4 stands out for its robust design, high power density, and energy efficiency.

Maxon has the matching gearhead

Combined with the GP 4 planetary gearhead, the EC 4 becomes a compact drive for use in micropumps, analytic and diagnostic devices, and laboratory robots. Precise and reliable, it can adjust lenses, dispense fluids, or position sensing devices. All units meet the ISO 13485 medical standard, which makes this maxon micro drive the perfect choice for applications in medical technology.

Maxon offers a complete line of dc motors, gearheads and controllers. Contact us to help find the right solution for your application. info@maxonmotor.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

ServoBelt Rotary Stage Family from Bell Everman is Available from Electromate!

Vaughan, Ontario, Canada — Motion Control — ServoBelt Rotary Stages from Bell Everman are compact, high-torque rotary stages that offer through hole size and speed comparable to direct-drive rotary tables costing thousands more.

Features include:

• Room in the Middle. ServoBelt Rotary stages offer two different through hole configurations. Available with 50-, 100- or 200-mm center openings, our large through hole stages accommodate large bundles of power, signal and pnuematic conductors. They also make it easy to integrate laser and optical systems. Standard-sized models with 16- or 25-mm through holes offer a more economical choice when fewer utilities need to pass through the center of the stage.

• Direct Drive Performance. Designed for NEMA 23 and 34 motors, the ServoBelt rotary stages offer speeds up to 1,000 rpm, continuous torque to 6.6 N-m and resolution down to 0.16 arc-sec with Renishaw ring encoders or tape scales for partial rotation.

• Application Flexibility. ServoBelt Rotary stages support both continuous rotation and variable indexing applications

• Robust, Lubed-for-Life Bearings. ServoBelt Rotary stages incorporate large full duplex, angular contact bearings, imparting moment and load capacities far in excess of its usual application requirements. This excess load capacity translates into virtually limitless bearing life.

• Cost Effective. ServoBelt Rotary stages offer an economical solution for a variety of medium-duty rotary motion jobs such as driving carousel tables on packaging and assembly machines and providing fourth-axis rotary motion for laser cutting and mini CNC machines.

CLICK HERE to view the Bell Everman ServoBelt Rotary Stages Brochure

CLICK HERE to view all of the Bell Everman Motion Control Components available from Electromate

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.comor visit Electromate at: www.electromate.com

Vadnais Heights, MN – Motion Control Components – Nexen Group’s Eclipse Servo Motor Brakes offer distinct advantages over spring-engaged, electrically-released brakes. With Nexen’s servo motor brake, no energy is consumed when the brake is disengaged. (Electrically-released brakes consume power continuously, even in disengaged mode, creating heat inside the brake, which detracts from its ability to produce full torque.) It is spring-engaged/air-released (no electric coil) to keep the brake cool until it’s needed.

Nexen’s servo motor brakes are designed to mount to the shaft end of servo motors up to 20 horsepower, including NEMA 23, 34 and 42 frame sizes. The brake’s square-shaped housing allows flexibility to custom make the mounting features match the motor dimensions. The brake’s output end duplicates the motor mounting features. The input end bore accepts the motor shaft and is fixed inside the brake with a split-hub/shaft collar arrangement.

Key features and benefits of the Eclipse servo motor brakes:

• Fail-safe, power-off engagement
• High torque – 50% more torque than competitive models (torque range 2 to 125 Nm)
• Zero backlash for accurate holding
• Integral flanges adapt to any servo motor or AC motor brand and mounting style
• High torsional rigidity, no system wind-up
• Models configured to hold the machined end of a ball screw
• Can be used for intermittent dynamic stopping
• Spring engaged for holding and E-stop applications
• High speed capability – engineered and balanced for servo applications

The Servo Motor Brake is a perfect complement to Nexen’s RPS system, holding an accurate position while work is being performed.

About Nexen Group, Inc.

Our heritage is built on producing technically superior products while providing the highest level of customer support. As a leading manufacturer of precision motion control components, power transmission and web tension control products, Nexen works to remain at the forefront of cutting edge engineering and production excellence. Our production capabilities include computerized control and testing systems, dry cutting applications, special coating processes, over 80 multi-axis precision CNC machine tools and automated assembly. By working with Nexen, our customers experience innovations that adhere to industry specifications, optimize their metrics and provide solutions focused on increased uptime, longer machine life and reduced maintenance.

For more information, please visit www.nexengroup.com or call 800-843-7445.

Maxon motor’s EPOS range of controllers has been very successful in the marketplace. Since its launch in 2005, more than 100,000 units are in use worldwide. To build upon this success, the Swiss drive specialist launches the EPOS4 as the next generation of positioning controllers.

Fall River, MA — The first product in maxon’s new line is the high-performance EPOS4 module with detachable pin headers and two different power ratings. With a connector board, the modules can be combined into a ready-to-install compact solution. The position controllers are suitable for efficient and dynamic control of brushed DC motors and brushless BLDC motors (EC motors) with Hall sensors and encoders up to 750 W continuous power and 1500 W peak power.

More performance and additional functionality

The Swiss drive specialists at maxon motor has equipped its product offering of CANopen positioning motor controllers with even more power, better control performance, and additional functionalities. The modular concept also provides for a wide variety of expansion options with Ethernet-based interfaces, such as EtherCAT or absolute rotary encoders. All these innovations are based on the successful principle of our Easy to use POsitioning System.

The combination of a wide variety of operating modes and state-of-the-art control characteristics like Field Oriented Control (FOC) with multiple analog and digital I/O along with various command options enables applications in a large number of fields from medical technology to robotics. As always, maxon relies on integrated protective devices like the Safe Torque Off (STO) functionality.

Intuitive parameterization!

Start-up and parameterization are performed with an advanced, intuitive graphical user interface called “EPOS Studio” and user-friendly menu-controlled wizards. A sophisticated automatic process for controller tuning has also been part of the package for years. Customers are free to fully dedicate themselves to their real task – developing their devices. Motor control becomes a secondary concern, as the EPOS comes with maxon’s comprehensive know-how in drive technology. Together with the three freely available libraries and programming examples, this makes the integration in a wide variety of systems very easy.

Up to 98% efficiency

All these characteristics are combined with a large input voltage range of up to 50 VDC, extremely high power density, and up to 98% efficiency. This makes EPOS4 position controllers the first choice for your drive application.

For more information on the EPOS position controller series of maxon motor, please see http://epos.maxonmotor.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website atwww.maxonmotor.com.

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle). The high speed, high accuracy, and smooth of the VCDS-051-089-01 series linear motion voice coil stages are found in manufacturing, medical, aerospace/defense, and inspection applications such as: Measuring, optical and electrical inspection, assembly, packaging, semiconductor handling, scanning, sampling, and pick -and-place robotics.

Available in standard models with positioning resolutions of 1 micron, 12.7 microns, 25.4 microns, and 29.95 microns, and with a 4.005 in. (101.7 mm) long x 3.000 in. (76.2 mm) wide stage, and convent mounting holes, this series of high performance stages is easily integrated in new and existing applications. Other resolutions, higher forces, and customized linear motion systems can be quickly engineered to meet a users individual requirement. Complete Plug-and-Play are also available.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, linear actuators, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry stan-dards throughout the design, manufacturing, service and technical support phases. Our mod-ern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with special-ized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engi-neers are always available to develop custom motion control products to fit the specific needs of our customers.

For PDF Catalog of Voice Coil Stages from Moticont – Click Here!

For additional information contact Joseph Hanks at Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com.

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost, low profile solution for the precise measurement of angles or the rotation of an object to a precise angular position. The AK130-15 Goniometer Stage is just 2.362 in. (60 mm) high and the height of the center of rotation is 4.724in. (120 mm). The 4.724in. x 5.118 in. (120 mm x 130 mm) table has +/- 15o of rotation at speeds up to 10 o/sec, and features a precision ground worm gear with a 304:1 ratio and a resolution of 0.0005o with a 10 micro-step per step stepper motor driver; the stage is also available with a servo motor and optical encoder. This low profile goniometer stage is ideal for: Microscopy, crystallography, measurement of surgical cutting blades, laser positioning, light measurement, and inspection applications.

Critical measurement and inspection operations are assured because of the high precision worm gear and crossed roller guides, (Repeatability of +/- 3 arcsec, Accuracy of +/- 8 arcsec, and Backlash of +/- 3 arcsec). This compact black anodized Motorized Goniometer Stage measures just 12.952 in. (329 mm) long (including the standard 1.8o stepper motor by 5.118 in. (130 mm) wide and can handle loads to 33 lb (15 Kg) of load. Mounting holes on the stage and in the base assure easy integration into an application. A calibrated indicator displays the angle of rotation, a hand knob is provided for manual adjustment, and the stage can be ordered plug-and-play with a fully compatible controller from OES.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Greenville, DE — Motion Control Components — Backlash and Torsional Rigidity are both important values to consider when selecting a high precision gearbox as they both affect lost motion (arcmin). GAM’s SPH Flange Gearbox has a single piece steel housing and ring gear machined directly inside for maximum stiffness. The helical gears are precision cut and ground for extremely quiet and smooth torque transmission with a standard backlash rating of < 3 arcmin or < 1 arcmin reduced.

The SPH series features helical gearing which brings a whole new level of power and precision to GAM’s already extensive portfolio of gear reducer technology. With special attention paid to every aspect during development, the SPH gracefully combines design and engineering, to deliver our best inline planetary gear reducer yet . For dynamic and demanding servo applications where performance is critical, the SPH is highly powerful and effi cient, yet smooth and quiet.

Download the new SPH brochure to see how the SPH Flange stacks up to other flange gearboxes available on the market when it comes to lost motion..

More information on the GAM SPH Planetary Gearboxes available from Servo2Go.com can be viewed at:http://www.servo2go.com/product.php?ID=105592&cat

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Van Nuys, CA – Motion Control Components – The off-the-shelf, LBIM-021 Series of Linear Three-phase Brushless Servo Motors from Moticont are sized to fit a broad range of linear motion applications. These low cost, compact linear motors feature: High acceleration, high speed, high accuracy, high repeatability, and high precision to less than one micron (0.00004 in.). The LBIM-021 Linear motor series is comprised of four sizes of forcers (the moving part of a linear motor) and matching magnetic tracks creating forces of 8.7 lbs (38.7 N), 16.3 lbs (72.4 N), 23.1 lbs (102.9 N), and 31.0 lbs (138.1 N) at 10% duty cycle. The light weight ironless forcers have no iron providing high acceleration, low inertia, and cog free motion. These high speed, non-contact brushless linear motors are ideal for a variety of: Medical, manufacturing, scanning, inspection, laser cutting, and precision assembly applications.

Clean room and people friendly, these clean, non-commutated, quiet linear servo motors are easily integrated into new and existing applications. Modular magnetic tracks, available in four standard and custom lengths, can be assembled to create unlimited stroke lengths, additionally; multiple forcers can operate in the same magnetic track with overlapping travels. LBIM-021 Series Linear Servo Motors can be commutated in a trapezoidal or sinusoidal mode and can be ordered as complete plug-and-play systems, including, position sensors, controllers, amplifiers, and power supplies. Other sizes of linear motors and custom designs are also available from Moticont.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Moticont, “A Motion Company” at 6901 Woodley Avenue, Van Nuys, CA 91406, USA; Tel: (888) 785-1804, Fax: (818) 785-5713, E-Mail: moticont@moticont.com or visit the website at http://www.moticont.com

New additions to the maxon family of X drives

Fall River, MA – Motion Control – Now even stronger, more efficient and with yet more combination options: There are new additions to the maxon family of X drive products. Several long versions of brushed DC motors, with higher torques and more power, are being added to the product range, together with matching planetary gearheads. Each of the 3-stage versions can now be combined with the next smaller motor. This saves space, weight and costs.

Two years ago, maxon motor introduced a new generation of brushed DC motors – the maxon X drives. These are extremely powerful, easy to configure online, and ready for shipment within 11 days. Now, four more motor sizes are being added to the existing portfolio. The 14, 16, 22 and 26 mm diameter models are now each available in a long version (L), which offers higher continuous torque and higher continuous output power.

At the same time, maxon motor is introducing four new GPX planetary gearheads, in the sizes 14, 19, 26 and 37 mm, compatible to existing products in the program. These gearheads are designed with scaled gear stages. Each of the new 3-stage gearheads can be driven with the next smaller motor. This brings many advantages, as the resulting drive system is smaller, lighter and more economical.

That’s not all, starting immediately, the existing GPX 16 and GPX 32 models are available in various versions and can be equipped with ceramic axles to reduce wear. Customers looking for a particularly low-noise gearhead have the option of choosing plastic planetary gears.

Maxon also expanded the encoder portfolio. The new ENX 16 Easy absolute encoder is available as an SSI or BiSS-C version, according to the customer’s requirements.

All new products are available in the online shop starting immediately. They can be easily configured together with the other maxon X drive products: Customers select the desired motor, the matching winding, brushes and shaft length, as well as the gearhead and encoder. The configured product is ready for shipment in 11 days or less. For more information, go to dcx.maxonmotor.com.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website atwww.maxonmotor.com.

Motion Control – Consider These High Torque, AC Servo Motors: MSE400, MSE800, MSE1K5, and MSE3K0 from JVL!

Birkerød, Denmark and Morrow, OH (USA) — Motion Control – The AC Servo Motors MSE400, MSE800, MSE1K5 and MSE3K0 have been designed by JVL for use with the JVL AMC20 series of advanced AC Servo Controllers.

Features Include

• Highest torque density rating in the industry
• High torque-to-inertia for faster start and stop
• Rugged design and long life bearings
• High power, cooler running, rare-earth magnet design
• Exposed-laminated housing, optimized for high torque and smooth operation
• Encoder 2000p/r.
• With JVL AMC20 series servo motor controller, 8000 counts/r with index pulse
• Very short length compared to power rating: 750W@102mm
• Standard servo flange
• Yaskawa/Omron flange and shaft
• High Axial and radial shaft load
• Low noise
• Option for planetary gear head
• Option for 24VDC brake

–Complete specifications and detailed drawings of the AC Servos Are Available Here!

About JVL – JVL is recognized as a leader for its development of modern, compact stepper motor drivers and VAC and VDC controllers as well as MAC motor series of integrated VAC servo motors (up to 3000W), and the QuickStep integrated stepper motors (up to 25Nm). Both the servo motor and stepper motor series includes the controller and encoder integrated into one compact unit.

JVL with more than 20 years of motion control experience enjoys a reputation for the development of specialized, customized equipment. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications.

JVL’s wide selection of quality products for motion control components include: Integrated VAC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, VDC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Keyboard/Display (Input/Output- and Counter Modules).

JVL USA • Att: Mike Fisher • National Sales Manager
8610 Morrow-Rossburg Rd • Morrow • OH 45152-9444
E-mail: mfisher@jvlusa.com • Tel.: 513/877-3134 •Tel.: 513/282-0888 (Tech Support Line) •
Fax: 513/877-2471•
For Additional Information about Mike Fisher and JVL USA – Click Here

USA and Canada – Reps & Distributors: – Click Here

All Other Countries:

Further information can be obtained from:

JVL Industri Elektronik A/S

Blorkken 42, DK 3460, Birkerød, Denmark

E-mail: jvj@jvl.dk Tel.: +45 4582 4440 ; Fax.: +45 4582 5550 ;

For JVL Home Office and World Wide Directory of Reps & Distributors – Click Here

West Chester, PA — Motion Control — Portescap introduces the next frame size in the DCP range of Athlonix™ high power density brush DC mini motors. Athlonix DCP motors offer an optimized price-to-performance solution ideal for a broad spectrum of applications. Available in a 16 mm diameter, the new 16DCP motor features an energy efficient coreless design with an optimized self-supporting coil and magnetic circuit, which ensures optimum price-to-performance is delivered.

Athlonix 16DCP motors are available in 2 variations, precious metal commutation and graphite commutation, both featuring an Alnico magnet inside. The unique constant force spring design for carbon brush ensures consistent performance. An REE (Restriction of Electro Erosion) coil is an available option, which ensures extended life of the motor and provides an environment of intrinsic safety especially at high speed conditions.

With maximum continuous torque up to 2.63 mNm and higher stall torque than similar motors, Athlonix 16DCP motors are ideally suited for use in applications such as medical & industrial pumps, gas analyzers, security & access, power tools, mesotherapy guns and tattoo machines.

“Athlonix motors are powered by a proprietary self-supporting coil resulting into maximized magnetic flux and ampere-turns for a given diameter” says Sunil Kumar, Brush DC Product Line Manager at Portescap. “In contrast, typical self-supporting coils have inherent ampere-turns limitations that affect the magnetic flux density in the magnetic circuit, which further limits power output and endurance of the motor,” he says.

“Due to lower motor regulation factor compared to comparable motors available in the market, our new 16DCP has higher load carrying capacity at minimum reduction in speed leading to more uniform power” says Sunil Kumar.

Athlonix motors are available with encoders and gearheads of various sizes and ratios. They are manufactured in an ISO certified facility and are RoHS compliant.

Portescap offers the broadest miniature and specialty motor products in the industry, encompassing coreless brush DC, brushless DC, stepper can stack, digital linear actuators, and disc magnet technologies.  Portescap products have been serving diverse motion control needs in wide spectrum of medical and industrial applications – medical, life science, instrumentation, automation, aerospace and commercial applications, for more than 70 years.

Portescap has manufacturing centers in the United States, St. Kitts, and India, and utilizes a Global Product Development network with research and development centers in the United States, China, India, and Switzerland.

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website atwww.portescap.com.

Greenville, DE — Motion Control – The DMC-30012 Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-30012 features an internal 800-Watt brushless sine drive which minimizes space, cost and wiring. The motion controller operates stand-alone or can be networked to a PC via Ethernet.

Features include:

• Single-axis motion controller with on-board 800 W brushless sinusoidal servo amplifier; 10 A cont.,15 A peak at 20-80 VDC rated
• Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
• Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
• Encoder feedback up to 15 MHz. Quadrature standard; SSI and BiSS encoder option. Main and auxiliary encoder inputs
• Encoder feedback up to 15 MHz. Quadrature standard; SSI and BiSS encoder option. Main and auxiliary encoder inputs
• Optically isolated forward and reverse limit inputs and homing input 8 uncommitted, isolated inputs and 4 isolated outputs
• High speed position latch and output compare
• 2 uncommitted analog inputs and 1 uncommitted analog output

Information on the DMC-30012 Motion Controller can be viewed at:https://www.servo2go.com/product.php?ID=105334&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 FREE or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Van Nuys, CA – Motion Control – Optimal Engineering Systems’ (OES) manual XYZ and θ (theta) stages are designed for high precision alignment applications. Available in three standard models, these stacked, crossed roller stages move in XY and Z linear axes, and have a θ (theta) or rotary top stage. Three standard models (MXYZAR38-A, MXYZAR60-A, MXYZAR85-A) have X and Y axis linear travels from the center line of +/- 6.5 mm (+/- 0.256 in.), +/- 6.5 mm (+/- 0.256 in.), and +/- 12.5 mm (0.429 in.), and a Z axis travel of +/- 3 mm (+/-0.118), +/- 5 mm (+/- 0.197 in), and +/- 5 mm (+/- 0.197 in). Applications for these high precision manual stages include: Gauging and gauging instrumentation, fine tuning of optical instruments, machine tools, micro assembly, micro machining, and alignment operations when parallelism, flatness, and accuracy are required.

These compact, black anodized stages measure just 96.25 mm (3.789 in.) wide, 88.75 mm (3.494 in.) deep, by 100 mm (3.957 in.) high (MXYZAR38-A), 117.5 mm (4.626 in.) wide, 109 mm (4.291 in.) deep, by 119.5 mm (4.705 in.) high (MXYZAR60-A), and 160.5 mm (6.319 in.) wide, 150 mm (5.906 in.) deep, by 120 mm (4.724 in.) high (MXYZAR85-A), and rotary table diameters are 38 mm (1.496 in.), 60 mm (2.362 in.), and 85 mm (3.346 in.), and they have load capacities of 0.9 kg (1.98 lb), 3 kg (6.61 lb), and 2.5 kg (5.51 lb) respectively. Additionally, XYZ and θ (theta) manual stages can be ordered with linear encoders and digital readouts, or customized to meet specific requirements.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

Greenville, DE — -Automation – Motion Control – The DVC series motor controllers from Advanced Motion Controls are digital four-quadrant servo drives purpose-designed and built to operate today’s modern mobile electric vehicular platforms. Providing high power from battery supplies, the DVC series features a compact design, IP65 construction and multiple operating modes for controlling either permanent magnet brushed or brushless motors. Whether for traction / propulsion, steering, lifting or any other electrically driven actuation, the DVC series is the newest member in a long line of successful motor controlling solutions from Advanced Motion Controls.

The ability to maximize battery life and extend vehicle operations, essentially running ‘lean and mean’, is the key to keeping a vehicle operating at peak performance. With unmatched power density, high efficiency, low weight, cool thermal operation and regen all built in, selecting the DVC series is the obvious choice.

The DVC Series motor controllers operate in torque, velocity, or position mode and provide high power from battery supplies with multiple operating modes for either 3Φ (servo, closed loop vector, or closed loop stepper) or 1Φ motors. The DVC Series communicate over CANopen and are configured with AMC’s DriveWare® 7 configuration software.

Specific applications include: mobile robots, AGV’s, UGV’s, material handling and transport vehicles in both industrial and military environments.

More information on the DVC series motor controllers available from Servo2Go.com can be viewed at:https://www.servo2go.com/search.php?search=DVC2&D=PROD

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Linear Motion Control Application – How Would You Position Components Of An Experimental Reactor Vessel Weighing 33 Tons?

Easy … Using Custom made LM76 Jet Rail Bearings and Shafting!

E. Longmeadow, MA –Linear Motion Control Application – When a privately funded research company was ready to move from their original Proof of Concept to a sustainable fusion reactor to produce clean sustainable energy, they realized that extremely heavy components would need to be assembled and disassembled and reassembled again for design modifications and maintenance. The completed assembly would be the length of two buses and easy alignment of the individual components would be critical.

The main reactor, the fusion containment chamber that is capable of containing a plasma medium of 10 to 15 million degrees is made of non-magnetic stainless steel as are many of the components. The Plasma Medium could be described as a football shaped blob about 1 meter in diameter by 2 meters long. The plasma medium is injected from each end of the reactor assembly by Plasma Guns.

See photo to right – On each end of the assembly is a Plasma Gun. The Plasma Guns as are all the floor lever components, are positioned using LM76 Jet Rail Bearings and shafting. The Jet Rail Bearings and Shafting can be seen near to bottom of the picture.

In addition to the reactor, high energy particle beam generators are positioned at angles to the fusion containment chamber. These particle bean generators form and suspend the plasma medium for an indefinite period of time in the center of the containment chamber. These generators have to be easily positioned – by hand – to accommodate adjustments and re-assembly.

See photo to the left – Neutral-Beam Injectors are positioned around the Reaction Chamber to position and shape the Plasma Medium. These are also moved into position on LM76 Jet Rail Bearings and Shafting.

In addition to supporting the weight of the components, the bearings selected to move these massive loads during the construction and testing of the fusion reactor would have to be non-magnetic. Working with engineers, LM76 developed a custom 3 inch Jet Rail Bearing designed to carry both the weight of the fusion reactor and the high energy particle generators. In addition LM76 supplied precision ground, 3 inch 303 stainless steel (non-magnetic) shafting.

The custom manufactured Jet Rail Roller Blocks and 303 stainless steel shafting simplified the assembly/disassembly of the fusion containment chamber and components while ensuring critical alignment throughout travel.

This breakthrough fusion reactor is still in the experimental stage. A commercially viable reactor would need to contain 100 million degrees. Why is the project so important? Because in addition to producing sustainable energy, its only by-product is, environmentally safe, “helium ash.”.

See photo below – The drawing below shows all the components in place. The assembly is 60 meters long and supported on LM76 jet Rail Bearings and Shafting.

For additional information about Jet Rail Linear Bearings and Shafting from LM76 go to: http://www.lm76.com/jet_rail.htm

About LM76:LM76 was founded on engineering innovation. Our first product, the ceramic coated linear bearing, was the “original” replacement for linear ball bearings – 1976. LM76’a hallmark is Engineering Excellence. Whether it’s a linear sleeve style bearing, a ball linear bearing, a roller bearing block or a complete linear slide, LM76 will design around your application and choose the correct technology and the best possible product. We design SUCCESS. For more information, call Mike Quinn

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

• Position feedback and control
• Fast and easy commissioning. No tuning needed
• No stalling. No step losses at all
• Torque control
• Much faster positioning and more cycles per second
• Increased efficiency and thereby much lower temperature
• Shorter settling time
• Controls higher inertias than open loop steppers
• Higher load tolerance
• More quiet operation (lower acoustic noise)
• Longer lifetime due to lower temperature
• Correct positioning without overshoot and oscillation

• Very high Torque at low speed. Often 3-4 times higher in same motor flange size
• Very high ratio-of-inertia, often up to 40:1
• Faster commissioning. No tuning needed
• Lower price. Same price as open loop steppers
• Totally stiff at standstill. Full holding torque
• Direct drive without gearbox (better and more precise torque control)
• Correct positioning without overshoot
• No oscillation
• Very short settling time

• Multiple axis applications (RS485, CANopen)
• Industrial Ethernet: Profinet, EtherNet/IP, EtherCAT, Powerlink, Modbus TCP, SERCOS III
• Positioning tasks with load changes
• Winding applications
• Belt drives (start/stop, positioning)
• Dosing pumps and filler systems
• Semi-conductor mounting
• Wafer production
• Textile machines and industrial sewing machines
• Robotics
• Testing and inspection systems
• Applications that require quiet operation, short settling times and precision positioning

Applimotion Low-Profile DDR Motors for Arc Segment and Large Diameter Motion Available from Electromate!

Vaughan, Ontario, Canada — Automation – Motion Control –The Infinity Series enables OEMs to move light payloads in smooth and accurate arc-shaped and full 360-degree rotary motion profiles. Ultra-thin arc-shaped motor segments can be used individually or interconnected to create exact partial arc segment motion or full 360-degree rotary motion. Modular construction allows for virtually unlimited diameter and large through holes. This level of flexibility is not possible with conventional motor designs.

The Infinity Series arc-shaped motors offer the right combination of torque, speed and smooth motion in flexible form factors and are ideal for low-profile, lightweight gimbals, broadband communication antennas, medical scanning, diagnostic imaging, inspection and metrology equipment.

Ultra-thin arc-shaped motor segments can be used individually or interconnected to create exact partial arc segment motion or full 360-degree rotary motion. Modular construction allows for virtually unlimited diameter and large through holes. This level of flexibility is not possible with conventional motor designs.

Direct drive technology eliminates the size, cost and positional errors associated with redundant bearings and gearing.

All models are compatible with a wide range of controllers and drives. Windings and form factors can be customized to meet application requirements.

CLICK HEREClick on the following link for more information on the Infinity arc-shaped motors from Applimotion.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak atsales@electromate.com or visit Electromate at: www.electromate.com

Vaughan, Ontario, Canada -Motion Control Components – Applimotion’s UTS Series Slotless Direct Drive Frameless Motors are permanent magnet 3phase ring type, low profile, direct drive motors with large through hole available in 29-240mm diameters.

For the ultimate in smooth operation when scanning or positioning, the UTS Series Slotless motors offer zero cogging and sinusoidal torque angle curves. Considered one of the best motor constructions for many years, Applimotion has leveraged already proven motor technology as the basis for this new family of direct drive motors. Once you have taken advantage of a slotless direct drive motor you won’t go back to traditional motors.

Features include:

• Wide Range of Diameters – from 29 mm to 240 mm.
  
• Medium motor constant – Low phase resistance and inductance for the motor size optimizes operation with low voltage power supplies and provides the high output with minimum voltage drop.
  
• Optional Windings – Select your voltage, speed and current, Applimotion will create a special winding to optimize torque or efficiency.
  
• Sinusoidal Torque Curves – motor designs for optimum performance with sinusoidal current control. Less than 1% higher harmonic content for minimum torque ripple on sinusoidal drives
  
• Zero Cogging Torque – provides ultra-smooth consistent motion.
  
• Optional Back Iron Rings – A standard set of iron rings are offered for each motor.
  
• Optional Hall Device Feedback – internally mounted PCA doesn’t add to motor height offered on some motors, others require externally mounted hall device board.

Click on the link below for information on the UTS Series from Applimotion.>-
http://www.electromate.com/assets/catalog-library/pdfs/applimotion/Applimotion_UTS_Motor_kits_Datasheet.pdf

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Longmeadow, MA – Linear Motion Control –The low cost, wide, stable platforms of the SAIBO SB-LGC Linear Motion Systems are available exclusively from LM76 in two sizes to meet load requirements up to 6000 N. (1349 lbs).  These wide, low profile linear motion systems feature: Low noise, smooth travel, high speed to 10 m/s (120 ft/s), high acceleration to 50 m/s (150 ft/s), low weight, high linear accuracy, sealed radial low friction bearings, low cost, and because of their wide profile they have high moment (Roll, Pitch, and Yaw) load capacities. Additionally they are easy to install, in any orientation, into new and existing applications.  SB-LGC maintenance free linear motion systems have sealed for life rollers, RC60 hardened shafts, and are available in lengths to 6000 mm (263 in.)

SAIBO SB-LGC Linear Motion Platform and Rail System have an adjustable preload system to control the required level of precision needed for most applications. Capable of loads to 6000 N (1349 lbs), the very stable LGC platforms have four drilled and tapped holes for mounting tooling, cameras, test equipment, etc.  For use in: Robotics, assembly, photography, pick-and-place, sorting, packaging, manufacturing, sampling, laser cutting, wafer handling, and other precision applications.

LM76, the exclusive US distributor of SAIBO linear motion components, manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications.  The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner.  Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com