motion control automation

Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!

September 04, 2025 Editor-Publisher

Motion Control – Three-Axis Stage!

Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems. These new, larger, high stability, gimbal mounts are 400 mm wide x 480 mm high, weigh 50 kg and handle loads up to 10 kg and the Roll Axis features a large 90 mm thru hole for cables and optics.

Motion Control – High Precision, High Load Goniometer Stages with +/- 30 Degrees of Travel Are Available from OES!

July 31, 2025 Editor-Publisher

Motion Control – Goniometer Positioning Stages

Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees of travel with 30 kg of load.

Motion Control – Dual-axis Yaw Pitch Stages for the Critical Measurement of Curves and Angles Featuring a 136 mm Radius of Rotation!

June 19, 2025 Editor-Publisher

Motion Control – Yaw Pitch Stages

Motion Control – Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has released the new YP200-30 Series of Dual-axis, Yaw-Pitch Stages. This series of Yaw-Pitch Stages features a high precision rotary stage (Yaw-axis) capable of clockwise and counterclockwise rotation and a high precision goniometer with +/- 30 degrees of travel.

Motion Control – NEW! YouTube Channel features High Precision Stages from Optimal Engineering Systems!

May 08, 2025 Editor-Publisher

Motion Control – OES YouTube Channel!

Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has unveiled their new YouTube Channel https://www.youtube.com/@oesmotioncontrolvideos. Checkout their new video featuring the AK110-10-15 Alpha-Beta Dual axis Goniometer Stage.

Motion Control – Video – Dual-axis Yaw Pitch Stages Enable High Precision Measurements of Curves and Angles!

March 27, 2025 Editor-Publisher

Motion Control – Video – Dual-axis Yaw Pitch Stage

Motion Control Stages – Dual Axis Yaw Pitch Stage
To View the Motion Control Video Click “HERE”

Motion Control – Video – The integration of high precision Rotary and Goniometer Stages creates platforms for the precise measurement of curves and angles. The YP100-45 Series (-01 thru -04) of Dual-axis Stages has been released by Optimal Engineering Systems, Inc. (OES). These compact, Yaw Pitch Stages features high precision rotary stages capable of 360 degrees of continuous rotation (clockwise/counterclockwise) and goniometers with +/45 degrees of travel.

Motion Control – Miniature Direct Drive Linear Motor with Integrated Encoder and Temperature Sensor is Just 16 mm in Diameter!

March 05, 2025 Editor-Publisher

Motion Control – Miniature Integrated Voice Coil Motor

Van Nuys, CA – Motion Control – Moticont has added the SDLM-016-032-01-01-M (Metric) Direct Drive Linear Motor with an integrated encoder and temperature sensor to their SDLM Series of Metric and Imperial dimensioned high precision linear actuators.

Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!

February 13, 2025 Editor-Publisher

Motion Control – XY-Theta Alignment Stages!

Van Nuys, CA – — Motion Control – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).

Motion Control – Portescap Launches Advanced Motion Controller for BLDC Motors!

February 06, 2025 Editor-Publisher

Motion Control – Motion Controller for Miniature BLDC Motors

Motion Control – Portescap proudly introduces its latest motion control solution, the PCR 56/06 EC SD – an integrated hardware and software package for single-axis control of brushless DC motors. Developed in partnership with Performance Motion Devices, Inc. (PMD), a leading motion control technology company headquartered in Boston, Massachusetts, this collaboration brings together industry-leading expertise to deliver a superior motion control solution across diverse applications.

Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages

December 26, 2024 Editor-Publisher

Motion Control – Linear Motion Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in).

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

November 14, 2024 Editor-Publisher

Motion Control – XYZ Axis Stages to Suit Specific Applications!

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.