Motorized Stages – Z-axis Motion Control Stages
Van Nuys, CA – Motorized Stages – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Category Archives: Solenoid
Motorized Stages – Sub-micron Z-Axis Positioning Motion Control Stages with Four Motor Options Introduced by OES!
Motion Control – High Force-to-Size Solenoid Series Features 18 different AWG Windings to Meet Force, Stroke Length, Voltage, and Duty Cycle Requirements of an Application!
Motion Control – Pull Type Tubular Solenoids
Motion Control – Van Nuys, CA – A series of 1.250 in. diameter tubular solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 1.00 inch, the S-20-125 series of Pull Type Tubular Solenoids feature 18 different solenoids with 23 AWG to 40 AWG (American Wire Gauge) windings. This broad range of solenoids allows the user to select the best solenoid for an application based on the force, stroke length, voltage, and duty cycle requirements. If needed, MSS solenoids with higher temperature class coil and lead wire insulation can be specified.
Motion Control – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!
Motion Control – Open Frame Solenoids
Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.
Motion Control – Select the Low Cost, Economical, Pull-type Latching Solenoid Best Suited for Your Application!
Motion Control – Latching Solenoids
Motion Control – Van Nuys, CA –A Series of Latching Pull-type Motion Control Solenoids released by Magnetic Sensor Systems (MSS) are low cost, economical to use, and easy to integrate into an application. The compact S-18-100T Pull-type Latching Solenoids are: 1.00 in. wide x 0.84 in. high x 1.73 in. long with 0.313 in diameter plunger.
Motion Control – 18 Compact Low-Profile Pull Type Clapper Solenoids Are Designed to Meet the Size, Voltage, Duty Cycle, and Force Requirements of Your Application!
Motion Control – Compact Push/Pull Solenoids
Motion Control – Van Nuys, CA – The S-08-54 Series of Low-Profile Pull Type Clapper Solenoids from Magnetic Sensor Systems (MSS) are just 0.54 in (13.8mm). in diameter and 0.80 in (20.3mm). long and the overall extended length is 1.08 in (27.4mm).
Motion Control – Miniature Push Type Solenoids Features 16 Standard Models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!
Motion Control – Push Type Solenoids
Motion Control – Van Nuys, CA – Magnetic Sensor Systems (MSS) has released the S-63-38-H Series of Push Type Tubular Solenoids. These miniature 0.38 in. diameter solenoids can be used as a push type solenoid at the push end or a pull type solenoid at the pull end and features 16 standard off-the-shelf options to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.
Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!
Motion Control – XY-Theta Alignment Stages!
Van Nuys, CA – — Motion Control – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).
Motion Control – Compact Rotary Solenoids Available in OEM Quantities, Can Be Performance Matched To An Application!
Motion Control – Rotary Solenoids
Motion Control – Van Nuys, CA –The R-09-150 CCWM Series of Counter Clockwise, Forward Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
Motion Control – Rotary Solenoids Matched to An Application Are Available in OEM Quantities!
Motion Control – Rotary Solenoids
Motion Control – Van Nuys, CA – The R-09-150 CWN Series of Clockwise, Reverse Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application.
Motion Control – Select from a Series of Low-Profile Push/Pull Type Solenoids to Meet the Specific Voltage, Duty Cycle, and Force Requirements of Your Application!
Motion Control – Compact Push/Pull Solenoids
Motion Control – Van Nuys, CA –Magnetic Sensor Systems (MSS) has released 18 low-profile Push/Pull Clapper Solenoids with the ampere turns (windings) adjusted to meet the specific force and duty cycle requirements of an application. The S-66-100 Series of Low-Profile Clapper Push/Pull Type Solenoids from MSS are just 1.00 in. in diameter and 0.66 in. deep.
Motion Control Automation – Select from a Series of Compact Electromagnets to Meet Holding Force and Duty Cycle Requirements of an Application!
Motion Control – Low Cost Electromagnets
Motion Control Automation – Van Nuys, CA – A powerful series of compact, low cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and holding force requirements of the application. E-22-150 Electromagnets are immediately available off-the-shelf in sample quantities and OEM quantities for Just-In-Time deliveries.
Motion Control – New! Large Three-axis Gimbal Mounts Feature High Resolution, and Four Motor Options
Motion Control – Solenoid Drivers
Van Nuys, CA – Motion Control – Designed for larger cameras, tracking devices, telescopes, optics, and other devices, four new, high resolution, three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.).
Motion Control – Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!
Motion Control – Open Frame Solenoids
Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user.
