Motorized Stages – Z-axis Motion Control Stages
Van Nuys, CA – Motorized Stages – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Van Nuys, CA – Motorized Stages – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.
Van Nuys, CA – Motion Control – The HVCM-051-032-013-01 Linear Voice Coil Motor released by Moticont, features a high force-to-size ratio and a 19.1 mm (0.75 in.) stroke. A low inertia, high acceleration/deceleration, high speed, clean and quiet, non-commutated, hollow core brushless servo motor, the HVCM-051-032-013-01 Linear Voice Coil Motor is ideal for applications such as: Testing, optical focusing, positioning, laser beam steering, laser drilling, cutting and machining, medical diagnostic equipment, scanning, wafer handling, dynamic vibration absorption, sorting, and assembly applications.

Forestville, CA, – — The RVC-1008 Rotational Voice Coil Stage: Optical element widths up to 20mm; Controllable motion over +/-10 degree optical; Small step response of less than 3msec; Non-contact electro-optic position sensor; Positioning sensitivity of less than 2µrad; Analog and USB control of mirror position; Digital positioning resolution of 6µrad; Fully integrated PID servo controller; Simple USB electrical interface; Extremely compact design.
Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems. These new, larger, high stability, gimbal mounts are 400 mm wide x 480 mm high, weigh 50 kg and handle loads up to 10 kg and the Roll Axis features a large 90 mm thru hole for cables and optics.
Motion Control – Van Nuys, CA – Moticont has added the SDLM-016-032-01-01-M (Metric) Direct Drive Linear Motor with an integrated encoder and temperature sensor to their SDLM Series of Metric and Imperial dimensioned high precision linear actuators.
Van Nuys, CA – – Motion Control – Optimal Engineering Systems, Inc. (OES) has added four goniometers to their expanding catalog of high precision positioning stages. The new, AK160-30 Goniometer Series feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer +/- 30 degrees of travel with 30 kg of load.
Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and a peak force of 6.5 N (23.3 oz) at a 10% duty cycle.


Forestville, CA – Motion Control Components – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time.
Motion Control – Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has released the new YP200-30 Series of Dual-axis, Yaw-Pitch Stages. This series of Yaw-Pitch Stages features a high precision rotary stage (Yaw-axis) capable of clockwise and counterclockwise rotation and a high precision goniometer with +/- 30 degrees of travel.
Van Nuys, CA – Motion Control – A one Micron resolution linear DC motor driven stage has been released by Moticont. The high performance VCDS-025-038-02-B1-01 linear voice coil stage features high speed, high acceleration/deceleration, zero backlash, smooth motion, precise positioning, high reliability, and low cost. This non-commutated stage is clean room friendly.

Forestville, CA – Motion Control – The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.
The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds. This high force, low noise voice coil motor is typically configured with an analog position feedback sensor and can be optionally equipped with a 1um resolution digital quadrature feedback element.

Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has unveiled their new YouTube Channel https://www.youtube.com/@oesmotioncontrolvideos. Checkout their new video featuring the AK110-10-15 Alpha-Beta Dual axis Goniometer Stage.
Motion Control – Van Nuys, CA – The LVCM-013-019-02M (Metric version) and the LVCM-013-019-02 (Imperial version) Linear Voice Coil Motors, just 12.7 mm (0.500 in.) in diameter, have been released by Moticont. Miniature brushless, efficient, high speed linear servo motors (known as Voice Coil and Moving Coil Motors) have a 12.7 mm (0.5 in) long stroke, a high-force-to-size ratio of 0.81 N (2.9 oz) and a peak force of 2.55 N (9.2 oz) at 10% duty cycle.
Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.
This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.
Motion Control – Video – The integration of high precision Rotary and Goniometer Stages creates platforms for the precise measurement of curves and angles. The YP100-45 Series (-01 thru -04) of Dual-axis Stages has been released by Optimal Engineering Systems, Inc. (OES). These compact, Yaw Pitch Stages features high precision rotary stages capable of 360 degrees of continuous rotation (clockwise/counterclockwise) and goniometers with +/45 degrees of travel.
Van Nuys, CA – Motion Control – Moticont has added the SDLM-016-032-01-01-M (Metric) Direct Drive Linear Motor with an integrated encoder and temperature sensor to their SDLM Series of Metric and Imperial dimensioned high precision linear actuators.
Van Nuys, CA – — Motion Control – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation on the rotary axis. The new XY-Theta Alignment Stages are driven by Two Phase Stepper Motors featuring 0.25 micron resolution (20 Micro-steps per Step Motor Driver in use).
Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up.
Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams